Brugermanual til Came TOPD4FPS 4-kanals fjernbetjening med dobbelt frekvens og fast kode

1. Introduktion

This manual provides comprehensive instructions for the Came TOPD4FPS 4-channel dual frequency fixed code remote control. This device is designed for controlling Came gate and garage door operators, offering reliable performance across two distinct frequencies: 433.92 MHz and 868.35 MHz. Please read this manual carefully before attempting to set up or operate the remote control to ensure proper functionality and safety.

Image 1.1: The Came TOPD4FPS remote control, featuring a pink casing and four black control buttons.

2. Sikkerhedsoplysninger

• Hold fjernbetjeningen utilgængeligt for børn for at forhindre utilsigtet betjening.
• Do not expose the remote control to water, extreme temperatures, or direct sunlight for prolonged periods.
• Undgå at tabe enheden eller udsætte den for kraftige stød.
• Only use the remote control for its intended purpose with compatible Came radio products.
• Bortskaf brugte batterier ansvarligt i henhold til lokale regler.

3. Produktfunktioner

• 4-Channel Operation: Allows control of up to four different Came operators or functions.
• Dobbelt frekvens: Operates on both 433.92 MHz and 868.35 MHz frequencies for enhanced compatibility and reliability.
• Fixed Code Technology: Utilizes a fixed code system for straightforward programming.
• Pre-Coded: Transmitters are pre-coded but can be easily re-coded from an existing, functional transmitter.
• Kompatibilitet: Exclusively compatible with Came radio products, including models such as CAME TOP-432EE, TOP-432EV, TOP-432NA, TOP-432SA, TOP-432M, and 4-channel TOP-434XX versions.

4. Opsætning og programmering

The Came TOPD4FPS remote control is pre-coded, but it can be programmed or copied from an existing, functional Came fixed code remote control. Ensure you are within close proximity to the receiver or the existing remote during the programming process.

4.1. Copying from an Existing Remote Control (Face-to-Face Method)

1. Take your existing, working Came fixed code remote control and the new TOPD4FPS remote control.
2. Tryk og hold knappen på ny TOPD4FPS remote control that you wish to program. Keep it pressed until the LED on the new remote starts to flash rapidly.
3. While still holding the button on the new remote, bring the existing, working remote control very close to the new remote, ideally face-to-face or side-by-side.
4. Press and hold the corresponding button on the eksisterende remote control that you want to copy.
5. The LED on the new TOPD4FPS remote control should change its flashing pattern (e.g., flash steadily or faster) to indicate successful code reception.
6. Slip begge knapper.
7. Test the newly programmed button on the TOPD4FPS remote control with your Came operator.
8. Repeat this process for any other buttons you wish to program.

Note: If programming is unsuccessful, ensure both remotes have fresh batteries and try again, adjusting the distance between them slightly. Some users find placing them 'muso a muso' (nose to nose) works best.

5. Betjeningsvejledning

Once programmed, operating the Came TOPD4FPS remote control is straightforward:

• Aktivering: Press the desired button on the remote control corresponding to the function you wish to activate (e.g., open gate, close garage door).
• Rækkevidde: Ensure you are within the operational range of your Came receiver for the command to be received.
• LED-indikator: The LED on the remote will illuminate when a button is pressed, indicating that a signal is being transmitted.

6. Vedligeholdelse

6.1. Udskiftning af batteri

The remote control is powered by internal batteries. When the battery level is low, the frequency flashing of the LED will change to warn you that the battery needs replacement. To replace the battery:

1. Åbn forsigtigt c'enasing på fjernbetjeningen.
2. Remove the old battery, noting its orientation.
3. Insert a new battery of the same type, ensuring correct polarity.
4. Luk fjernbetjeningen casing sikkert.

6.2. Rensning

Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing eller interne komponenter.

7. Fejlfinding

• Fjernbetjeningen virker ikke efter programmering:
  • Ensure the programming steps were followed precisely.
  • Verify that the existing remote control used for copying is fully functional and has a strong battery.
  • Check the battery in the new TOPD4FPS remote control.
  • Ensure the new remote is compatible with your Came operator (refer to Section 3).
  • Try repeating the programming process, adjusting the distance and angle between the two remote controls.
• Reduceret driftsområde:
  • Udskift batteriet i fjernbetjeningen.
  • Check for any obstructions between the remote control and the receiver.
  • Sørg for, at modtagerantennen ikke er beskadiget eller blokeret.
• LED not illuminating:
  • The battery may be completely depleted. Replace the battery.
  • Sørg for, at batteriet er isat med den korrekte polaritet.

8. Tekniske specifikationer

9. Garanti og support

For warranty information, technical support, or further assistance, please refer to the documentation provided with your purchase or contact Came customer service directly. Details can typically be found on the manufacturer's official webhjemmeside eller gennem din produktforhandler.