1. Introduktion
The Aeotec Range Extender 7 is a Z-Wave Plus certified device designed to enhance the performance and range of your Z-Wave smart home network. It acts as a signal repeater, amplifying and repeating weak Z-Wave and Z-Wave Plus signals to eliminate dead zones and improve communication reliability between your Z-Wave hub and connected devices. Built upon Aeotec's Gen7 hardware, it supports 700 series Z-Wave and Z-Wave Plus V2, including the repetition of S2 security signals.
Figure 1: Aeotec Range Extender 7 and its packaging, highlighting its signal repeating and amplifying capabilities.
2. Hvad er der i æsken
- Aeotec Range Extender 7 Unit
- Instruktionsmanual
3. Specifikationer
- Modelnummer: ZW189-A01
- Produktdimensioner: 1.2 x 1.4 x 1.6 tommer
- Varens vægt: 1.28 ounce
- Standard for trådløs kommunikation: 900 MHz Radio Frequency (Z-Wave, Z-Wave Plus, 700 series, S2 Security)
- Trådløs rækkevidde: Up to 250% further than previous generations (actual range may vary based on environment)
- Z-Wave Communication Speed: Up to 50% faster
- Strømkilde: Tilslutning (ingen batterier nødvendige)
4. Opsætning
4.1. Fysisk installation
Simply plug the Aeotec Range Extender 7 into a standard indoor power outlet. Choose a central location between your Z-Wave hub and the devices that are experiencing connectivity issues or are out of range.
Figure 2: The Range Extender 7 plugged into a wall outlet, ready for setup.
4.2. Pairing with Z-Wave Hub (SmartStart)
The Range Extender 7 supports SmartStart for easy inclusion. Scan the SmartStart QR code located on the device or its packaging using your Z-Wave hub's app. The device will automatically join your Z-Wave network.
Z-Wave Device Specific Key (DSK): 35732-16721-22842-01321-22969-56831-54006-56519
Figur 3: Nærbillede view of the Range Extender 7, highlighting the SmartStart QR code for easy pairing.
If SmartStart is not supported by your hub, you may need to initiate manual inclusion. Refer to your Z-Wave hub's instructions for specific steps. Typically, this involves putting the hub into inclusion mode and then pressing the action button on the Range Extender 7.
5. Betjening
Once successfully paired, the Aeotec Range Extender 7 automatically begins to strengthen your Z-Wave network. It acts as a repeater, forwarding Z-Wave commands and signals between your Z-Wave hub and other Z-Wave devices, effectively extending the communication range and improving network reliability. It supports Z-Wave and Z-Wave Plus protocols, including S2 security signals.
Figure 4: Visual representation of the Range Extender 7's ability to eliminate dead zones and provide 250% further wireless range and 50% faster Z-Wave communication.
The device is designed to operate continuously when plugged in, providing a stable and robust Z-Wave mesh network. Its compact size allows it to be discreetly placed in various locations without obstructing other outlets.
6. Vedligeholdelse
The Aeotec Range Extender 7 is a plug-in device and does not require batteries. For maintenance, simply ensure the device remains plugged into a functional power outlet and is free from physical obstructions. You may periodically wipe the device with a dry, soft cloth to keep it clean.
7. Fejlfinding
If you experience Z-Wave connectivity issues with devices, consider the following:
- Rækkeviddebegrænsninger: The Range Extender 7 is specifically designed to overcome range limitations. If a device is too far from your hub, placing the extender between them can significantly improve connectivity.
- Parringsproblemer: Ensure your Z-Wave hub is in inclusion mode when attempting to pair the extender. If issues persist, try excluding the device first (if it was previously paired) and then re-including it.
- Netværksinterferens: While Z-Wave operates on a different frequency than Wi-Fi, other electronic devices can sometimes cause interference. Try relocating the extender or the problematic Z-Wave device.
- Hub-kompatibilitet: Ensure your Z-Wave hub is compatible with Z-Wave Plus and S2 security for optimal performance. The Range Extender 7 is compatible with most certified Z-Wave gateways, including SmartThings, Hubitat, Alarm.com, Ring, Control4, Fibaro, Vera UI7, Homey, Domoticz, Jeedom, Open-zwave, and Zipato.
Figure 5: The Range Extender 7's broad compatibility with popular Z-Wave hubs.
8. Garanti og support
For technical support, warranty information, or to access additional resources, please visit the official AEOTEC website. You can also refer to your product's specific warranty card included in the packaging for detailed terms and conditions.
