Aerocool Bolt Mini MATX RGB PC Gaming Case User Manual

1. Produktet er slutview

The AeroCool Bolt Mini is a high-performance mini tower PC case designed for MATX and Mini-ITX motherboards. It features a stylish Lightning Bolt RGB LED design on the front panel, a full tempered glass side panel, and a carbon fiber style front panel, offering a modern aesthetic for your gaming setup.

Nøglefunktioner omfatter:

• Dynamisk RGB-belysning: 13 preset lighting modes, including 6 RGB flow modes and 7 static color modes, controllable via an LED button.
• Hærdet glas sidepanel: A full tempered glass side panel allows for a clear view af dine interne komponenter.
• Optimeret køling: Supports air cooling configurations with optional fan placements at the front (2x 120mm), top (2x 120mm), and rear (1x 120mm included). Liquid cooling support for 120mm radiators at the front and rear.
• Futuristisk design: Carbon fiber style front panel for a sleek and modern appearance.

2. Opsætning og installation

This section provides guidance on setting up your AeroCool Bolt Mini case and installing components.

2.1 Physical Dimensions and Compatibility

• Dimensioner (LxBxH): Approximately 15.43 x 7.91 x 14.96 inches (39.2 x 20.1 x 38.0 cm).
• Bundkort kompatibilitet: Supports Mini-ITX and Micro-ATX motherboards.
• Montering af strømforsyning: Bottom mount.

2.2 Komponentinstallation

Before beginning installation, ensure you have all necessary components and tools. Refer to your motherboard and component manuals for specific installation instructions.

Figur 2.1: Foran til venstre view of the AeroCool Bolt Mini case, showcasing the tempered glass side panel and the RGB LED strip on the front.

Figur 2.2: Indre view of the AeroCool Bolt Mini case, showing the motherboard mounting area, drive bays, and the pre-installed rear fan.

Figur 2.3: For og bag view of the AeroCool Bolt Mini case, highlighting the carbon fiber style front panel and the rear I/O and fan mounting.

Figur 2.4: Top view of the AeroCool Bolt Mini case, showing the front I/O panel with USB ports and audio jacks.

2.2.1 Installation af bundkort

1. Fjern sidepanelerne.
2. Installer I/O-skjoldet i den bageste åbning af kabinettet.
3. Align your Micro-ATX or Mini-ITX motherboard with the standoffs and gently place it into position.
4. Fastgør bundkortet med skruer.

2.2.2 Installation af lagerdrev

The case supports various storage configurations. Refer to the internal layout for specific drive bay locations.

2.2.3 Installation af strømforsyning

Install your ATX power supply into the bottom mounting area of the case. Secure it with screws from the rear.

2.2.4 Installation af kølesystem

The case comes with one 120mm black fan pre-installed at the rear. Additional fans or radiators can be installed as follows:

• Front: Supports 2 x 120mm fans or a 120mm radiator.
• Top: Understøtter 2 x 120 mm blæsere.
• Bag: Supports 1 x 120mm fan (included) or a 120mm radiator.

3. Betjeningsvejledning

3.1 Frontpanel I/O

The top front panel provides convenient access to essential ports and controls:

• Power knap: To turn your system on or off.
• Nulstil knap: For at genstarte dit system.
• USB-porte: Includes USB 2.0 ports for connecting peripherals.
• Lydstik: Til hovedtelefoner og mikrofon.

3.2 RGB-lysstyring

The AeroCool Bolt Mini features an integrated RGB LED strip on the front panel with 13 lighting modes. These modes can be cycled using the dedicated LED control button located on the top panel.

• 6 RGB Flow Modes: Dynamic lighting effects that cycle through colors.
• 7 Static Color Modes: Solid color illumination (e.g., Red, Green, Blue, Yellow, Cyan, Purple, White).

Press the LED control button repeatedly to cycle through the available lighting modes. Hold the button for a few seconds to turn off the RGB lighting.

4. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre lang levetid og optimal ydeevne for dit pc-kabinet og komponenter.

4.1 Rengøring af kabinettet

• Ydre: Brug en blød, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners or solvents.
• Hærdet glaspanel: Clean the tempered glass with a glass cleaner and a microfiber cloth to prevent streaks. Do not apply excessive force.
• Støvfiltre: Periodically remove and clean any dust filters (e.g., top magnetic filter, PSU filter) to maintain good airflow. Rinse with water if necessary and ensure they are completely dry before reinstallation.
• Indre: Use compressed air to blow out dust from inside the case, especially around fans and components. Ensure the system is powered off and unplugged before cleaning the interior.

5. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med dit pc-kabinet.

5.1 RGB Lighting Not Functioning

• Tjek forbindelser: Ensure the RGB LED strip is properly connected to the case's internal controller and that the controller is powered (usually via a SATA power connector from your PSU).
• LED knap: Press the LED control button to cycle through modes. If it's unresponsive, check the button's internal connection to the controller.
• Power Cycle: Turn off your PC, unplug it from the wall, wait 30 seconds, then plug it back in and restart.

5.2 Dårlig luftgennemstrømning eller overophedning

• Clean Dust Filters: Ensure all dust filters are clean and not obstructed.
• Ventilatorretning: Verify that installed fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
• Kabelstyring: Poor cable management can obstruct airflow. Reroute cables behind the motherboard tray where possible.
• Add More Fans: Consider installing additional fans in available mounting locations to improve cooling.

5.3 Frontpanelporte virker ikke

• Tjek bundkortforbindelser: Ensure the USB and audio headers from the front panel are securely connected to the correct pins on your motherboard.
• Driverproblemer: For audio, ensure your motherboard's audio drivers are up to date.

6. Specifikationer

7. Garanti og support

AeroCool products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official AeroCool webwebsted.

For technical support, troubleshooting assistance, or inquiries regarding your AeroCool Bolt Mini case, please contact AeroCool customer service through their official support channels.

Fabrikant: Aerocool

Mærke: AeroCool