ROBOTIME Apatosaurus træ 3D puslespil instruktionsmanual

1. Introduktion

Welcome to the ROBOTIME Apatosaurus Wooden 3D Puzzle. This instruction manual provides detailed guidance for assembling, operating, and maintaining your voice-controlled dinosaur model. Designed for engaging and educational assembly, this kit allows you to construct a functional Apatosaurus that can walk, roar, and respond to sound.

Læs venligst alle instruktioner omhyggeligt, inden du begynder monteringen, for at sikre en problemfri og behagelig byggeoplevelse.

2. Pakkens indhold

Before starting, verify that all components listed below are present in your package.

• Pre-cut Plywood Sheets (containing 71 pieces)
• Motorenhed
• Sensorenhed
• Electronic Components (wires, battery compartment, speaker)
• Detailed Assembly Instructions Booklet
• Small Accessories (e.g., screws, plastic gears, springs)

Billede 1: Overview of the ROBOTIME Apatosaurus puzzle components, including pre-cut wooden sheets, electronic parts, and the assembly instruction booklet.

Billede 2: Et nærmere view of the pre-cut plywood sheets with numbered parts, alongside various electronic components such as the speaker and plastic gears.

3. Monteringsvejledning

The ROBOTIME Apatosaurus is a DIY assembly kit designed to engage both hands and mind. Follow the numbered steps in the included instruction booklet carefully.

1. Forberedelse: Unpack all components and lay them out on a clean, flat surface. Identify the plywood sheets and the separate electronic parts.
2. Del identifikation: Each wooden piece is numbered. Refer to the instruction booklet to identify the correct parts for each step. Gently push out the pieces from the plywood sheets. Avoid forcing them to prevent damage.
3. Indledende samling: Begin by assembling the core body structure using the interlocking wooden pieces as guided by the manual. Pay close attention to the orientation of each piece.
4. Electronic Integration: As instructed, integrate the motor, sensor, and other electronic components into the wooden structure. Ensure all wires are connected correctly and securely. Incorrect wiring may prevent the model from functioning.
5. Leg and Tail Assembly: Attach the legs and tail sections, ensuring that the joints allow for proper movement. The mechanical parts should move freely without excessive friction.
6. Head and Neck Assembly: Assemble the head and neck, connecting them to the main body.
7. Afsluttende kontrol: Once all parts are assembled, double-check all connections and ensure no pieces are loose. Insert the required batteries (not included) into the designated compartment.

Tip: Some parts may require gentle sanding or a small amount of glue for a more secure fit, though typically not necessary if assembled correctly. Always refer to the specific instructions provided in your kit.

Billede 3: The completed ROBOTIME Apatosaurus wooden 3D puzzle, showcasing its intricate design and structural integrity.

4. Betjeningsvejledning

Your ROBOTIME Apatosaurus model is designed with voice control functionality.

1. Tænd: Ensure batteries are correctly installed. Locate the power switch (if present, usually near the battery compartment) and turn the model ON.
2. Stemmeaktivering: The Apatosaurus responds to sound. A clap of hands or a clear, distinct sound will activate its movements and sounds.
3. Funktionalitet: Upon activation, the dinosaur will walk, roar, and may exhibit biting motions, simulating a real Apatosaurus.
4. Optimalt miljø: For best performance, operate the model in a relatively quiet environment to ensure clear detection of voice commands.

5. Vedligeholdelse

To ensure the longevity and proper functioning of your ROBOTIME Apatosaurus model, follow these maintenance guidelines:

• Rensning: Wipe the wooden surfaces with a dry, soft cloth. Avoid using water or chemical cleaners, as they can damage the wood and electronic components.
• Opbevaring: Store the model in a dry place away from direct sunlight and extreme temperatures to prevent warping or damage to the wood and electronics.
• Batteripleje: Remove batteries if the model will not be used for an extended period to prevent leakage and damage to the electronic circuit.
• Håndtering: Handle the assembled model with care, especially delicate parts like the neck and tail, to avoid breakage.

6. Fejlfinding

If your ROBOTIME Apatosaurus model is not functioning as expected, consider the following:

7. Specifikationer

• Model: TSP-D-part (Apatosaurus)
• Mærke: ROBOTIME
• Materiale: Engineered Wood (Plywood), Motor, Sensor
• Antal stykker: 71
• Montering påkrævet: Ja
• Særlige funktioner: Durable, Sound, Voice Control, Walking Motion
• Anbefalet alder: 3 years and up (Manufacturer recommended age: 36 months and up)
• Pakkedimensioner: Approximately 320 x 235 x 55 mm (31 x 23 x 5.1 cm)
• ASIN: B081CQKMD1

8. Garanti og support

ROBOTIME products are manufactured with quality in mind. For any questions regarding assembly, missing parts, or operational issues not covered in this manual, please contact ROBOTIME customer support directly.

Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region.