1. Introduktion
This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Scheppach HC26 Compressor Air Compressor. Please read this manual thoroughly before operating the device to ensure proper use and to prevent injury or damage.
Figure 1: Scheppach HC26 Compressor Air Compressor. This image shows the main unit with its 24-liter tank, motor housing, pressure gauges, and wheels, alongside a small container, likely for compressor oil.
2. Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.
- Læs alle instruktioner: Familiarize yourself with the controls and proper use of the compressor.
- Elektrisk sikkerhed: Ensure the power supply matches the specifications (230V). Do not operate in wet conditions.
- Personligt beskyttelsesudstyr (PPE): Always wear safety glasses or goggles. Hearing protection is recommended during extended use.
- Tryksikkerhed: Never exceed the maximum working pressure of 8 bar. Do not direct compressed air at people or animals.
- Opretholdelse: Disconnect from power before performing any maintenance or adjustments.
- Ventilation: Brug kompressoren i et godt ventileret område for at forhindre overophedning.
- Stabilitet: Sørg for, at kompressoren står på en stabil, plan overflade under drift.
3. Produktet er slutview
3.1 Nøglefunktioner
- Max. Working pressure: 8 bar
- Kettle size: 24 L
- Oil-lubricated piston compressor for durability and long-lasting performance.
- Quick connection coupling for fast and easy tool changes.
- Driving device (wheels) and ergonomic handle for easy transport.
- Motor Power: 1500 W (2.0 HP)
- Suction Power: 220 L/min
3.2 Komponenter
The Scheppach HC26 compressor includes the main compressor unit with a 24L tank, motor, pressure gauges, pressure regulator, quick coupling, wheels, and a transport handle.
Figure 2: Pressure Gauge and Quick Coupling. This close-up shows the pressure gauge indicating tank pressure and the quick connection coupling for attaching pneumatic tools.
4. Opsætning
- Udpakning: Tag forsigtigt kompressoren og alt tilbehør ud af emballagen. Undersøg for eventuelle transportskader.
- Hjulsamling: Attach the wheels to the designated axles on the compressor base. Secure them firmly according to the included hardware.
- Oliepåfyldning: As an oil-lubricated compressor, ensure the crankcase is filled with the appropriate compressor oil to the correct level before first use. Refer to the oil level indicator.
- Placering: Position the compressor on a firm, level surface in a well-ventilated area, away from walls or obstructions to allow for proper airflow.
- Elektrisk tilslutning: Connect the compressor to a grounded 230V, 50Hz power outlet.
5. Betjeningsvejledning
- Indledende opstart: After setup, turn on the compressor. It will begin to build pressure in the tank. The motor will automatically shut off once the maximum pressure (8 bar) is reached.
- Justering af udgangstryk: Use the pressure regulator knob to set the desired output pressure for your pneumatic tool. Monitor the regulated pressure gauge.
- Tilslutningsværktøjer: Attach your pneumatic tool to the quick connection coupling. Ensure a secure connection.
- Operation: Begin using your tool. The compressor motor will cycle on and off automatically to maintain tank pressure as air is consumed.
- Lukker ned: When finished, turn off the compressor. Disconnect the tool and then unplug the compressor from the power outlet.
- Afløb af kondensat: After each use, or at least daily, drain any accumulated moisture from the tank using the drain valve located at the bottom of the tank. This prevents rust and extends tank life.
5.1 Almindelige applikationer
- Dækpumpe: Ideal for inflating vehicle tires, bicycle tires, and sports equipment.
- Nailing/Stapling: Powers pneumatic nailers and staplers for various woodworking and construction tasks.
- Spraymaling: Suitable for use with spray guns for painting projects.
- Blowing/Cleaning: Effective for blowing dust and debris from workspaces, tools, and machinery.
- Pneumatic Ratchets: Can power small pneumatic ratchets for mechanical work.
Figur 3: Anvendelseseksempelamples. This diagram visually represents common uses for the air compressor, including powering nail guns, pneumatic ratchets, spray guns, and for tire inflation and general blowing tasks.
Figure 4: Mobile Use. A user is shown inflating a car tire, demonstrating the compressor's suitability for mobile applications thanks to its wheels and handle.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din luftkompressors lange levetid og optimale ydeevne. Afbryd altid strømmen, før du udfører nogen form for vedligeholdelse.
- Drain Condensate: Daily or after each use, open the drain valve at the bottom of the tank to release accumulated moisture.
- Tjek oliestand: Regularly check the oil level in the crankcase. Refill or change oil as needed, using only recommended compressor oil.
- Ren luftfilter: Inspect and clean the air filter regularly. A clogged filter reduces efficiency and can damage the motor. Replace if necessary.
- Generel rengøring: Keep the compressor clean and free of dust and debris. Wipe down exterior surfaces.
- Inspicer slanger og fittings: Periodically check all hoses and fittings for leaks, cracks, or damage. Replace any worn parts.
Figure 5: Portability and Maintenance. This graphic highlights the compressor's ease of transport and its design for straightforward maintenance.
7. Fejlfinding
Før du kontakter kundesupport, skal du se følgende tabel for almindelige problemer og løsninger på disse.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Kompressoren starter ikke. | Ingen strøm, udløst afbryder, defekt afbryder. | Kontrollér strømtilslutningen, nulstil afbryderen, kontakt service, hvis afbryderen er defekt. |
| Kompressoren kører kontinuerligt eller ofte. | Air leak in system, check valve issue, excessive air demand. | Check hoses and fittings for leaks, inspect check valve, reduce air consumption. |
| Lavt lufttryk. | Clogged air filter, air leak, pressure regulator set too low. | Clean/replace air filter, check for leaks, adjust pressure regulator. |
| Overdreven støj eller vibrationer. | Loose components, worn parts, insufficient oil. | Tighten fasteners, inspect for worn parts, check and add oil if needed. |
8. Tekniske specifikationer
| Specifikation | Værdi |
|---|---|
| Modelnavn | HC26 (5906135901) |
| Mærke | Scheppach |
| Voltage | 230 volt |
| Motor hestekræfter | 1500 W (2.0 HK) |
| Maks. Arbejdstryk | 8 bar |
| Tank kapacitet | 24 liter |
| Air Flow Capacity (Suction) | 220 LPM |
| Varens vægt | 1 kilogram (ca. 2.2 pund) |
| Produktdimensioner | 0.04"L x 0.04"W x 0.04"H (Note: These dimensions appear to be placeholder values and may not reflect the actual size of the compressor.) |
| Speciel funktion | Durable, Oil-lubricated piston compressor |
Figure 6: Key Specifications. This infographic highlights the maximum 8 bar working pressure, 220 L/min suction power, and 24 L tank volume. Please note the discrepancy regarding 'Oil-free' in the image versus 'Oil Lubricated' in the product description; the product is confirmed to be oil-lubricated.
9. Garanti og support
For warranty information, technical support, or to order replacement parts, please contact Scheppach customer service. Retain your proof of purchase for warranty claims.
For the most up-to-date contact information, please visit the official Scheppach webwebstedet eller se den dokumentation, der fulgte med dit køb.
