TOTAL P20S 20V batteridrevet kompressorpistol brugsanvisning

1. Introduktion og overview

Thank you for choosing the TOTAL P20S 20V Cordless Compressor Gun. This electric air pump is designed for efficient inflation of various items, including vehicle tires, sports balls, and inflatable mattresses. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Billede 1.1: The TOTAL P20S 20V Cordless Compressor Gun. This image displays the main unit with its attached hose and inflation nozzle, ready for use. The battery is shown as a placeholder, indicating it is sold separately.

2. Sikkerhedsinstruktioner

Følg altid følgende sikkerhedsretningslinjer for at forhindre personskade og beskadigelse af værktøjet:

• Read all instructions carefully before operating the compressor gun.
• Wear appropriate personal protective equipment, such as eye protection.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk fra betjeningsområdet.
• Do not operate the compressor for more than 30 minutter i træk to prevent overheating. Allow the tool to cool down before resuming use.
• Always verify the recommended pressure for the item being inflated (e.g., vehicle tires, balls) from the manufacturer's specifications before inflation.
• Do not point the nozzle at yourself or others.
• Opbevar værktøjet et tørt og sikkert sted, utilgængeligt for børn.
• Use only TOTAL P20S 20V batteries and chargers with this device.

3. Produktkomponenter

The TOTAL P20S 20V Cordless Compressor Gun package includes the following items:

• 1 x Cordless Compressor Gun (Model TACLI2001)
• 1 x Ball Inflation Adapter
• 1 x Tire Inflator Nozzle

Note: The 20V P20S battery and charger are ikke inkluderet and must be purchased separately. These components are interchangeable with other tools in the TOTALTOOLS P20S range.

Billede 3.1: The compressor gun displayed with its analog pressure gauge and included accessories: a ball inflation adapter and a tire inflator nozzle. The image also reminds that the battery and charger are not included.

4. Opsætning

1. Oplad batteri: Ensure your TOTAL P20S 20V battery is fully charged using a compatible TOTAL P20S charger (both sold separately).
2. Installer batteri: Slide the charged battery into the battery slot at the base of the compressor gun until it clicks securely into place.
3. Attach Nozzle/Adapter: Select the appropriate inflation nozzle or adapter for the item you intend to inflate. Securely attach it to the end of the 40 cm inflation hose.
4. Tjek forbindelser: Verify that all connections are tight to prevent air leakage during operation.

5. Betjeningsvejledning

1. Klargør genstand til oppustning: Position the item to be inflated in a stable manner.
2. Tilslut dyse: Firmly attach the selected nozzle or adapter to the valve of the item you are inflating.
3. Monitortryk: The compressor gun features an analog pressure gauge. Continuously monitor the pressure reading during inflation to avoid over-inflation. The maximum supported pressure is 150 Psi / 10 Bar.
4. Start inflation: Press and hold the trigger to begin inflating. Release the trigger to stop.
5. Kontroller anbefalet tryk: Always inflate to the manufacturer's recommended pressure. For vehicle tires, this information is typically found on a sticker inside the driver's side door jamb or in the vehicle's owner's manual.
6. Undgå overophedning: Do not operate the compressor for more than 30 minutes continuously. If prolonged use is required, allow the unit to cool down for at least 15-20 minutes after each 30-minute cycle.
7. Afbryde: Once the desired pressure is reached, release the trigger and carefully disconnect the nozzle from the item's valve.

Billede 5.1: En detaljeret view of the compressor gun's analog pressure gauge, which displays pressure in Psi and Bar, and the attached inflation nozzle. This gauge is essential for monitoring inflation levels.

6. Vedligeholdelse

Regular maintenance ensures the longevity and efficient operation of your compressor gun:

• Rensning: After each use, wipe down the compressor gun with a clean, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the tool and its accessories in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
• Slangeinspektion: Periodically inspect the 40 cm inflation hose for any signs of wear, cracks, or damage. Replace if necessary.
• Batteripleje: Opbevar batterier et køligt og tørt sted. Opbevar ikke helt afladede batterier i længere perioder.
• Vedligeholdelse af dyse: Keep inflation nozzles clean and free of debris to ensure proper sealing.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

The TOTAL P20S 20V Cordless Compressor Gun (Model TACLI2001) comes with a manufacturer's warranty of 10 år. Spare parts are also available for a period of 10 years from the date of purchase.

For technical support, warranty claims, or inquiries regarding spare parts, please contact TOTAL customer service through your retailer or the official TOTAL website. When contacting support, please have your model number (TACLI2001) and proof of purchase readily available.