Indledning
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger under installation og brug:
- Vægt kapacitet: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Vægstruktur: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- UL-listet: This product is UL Listed, indicating it meets specific safety standards.
- Professionel assistance: Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret fagmand.
- Børn: Hold børn væk fra installationsområdet under opsætningen.
- Værktøjer: Use appropriate tools and follow all instructions for their safe operation.
Pakkens indhold
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Vægplademontering
- TV-beslag (2 stk.)
- Various TV Screws (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Boble niveau
- Skruenøgle
- Installationsskabelon
Specifikationer
| Modelnummer | 28XTu2564 |
| Mærke | MONTERING |
| Tv -størrelse kompatibilitet | 26 til 65 tommer |
| Vægt kapacitet | 88 lbs (40 kg) |
| VESA-kompatibilitet | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Kompatibilitet mellem vægtyper | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Tilt vinkel | +5° / -13° |
| Drejevinkel | ±45° (Maximum swivel angle depends on TV size) |
| Niveaujustering | ±3° (Post-installation) |
| Vægafstand | 3" til 15.7" |
| Materiale | Legeret stål |
Opsætning og installation
Kontrol før installation
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Check Wall Type: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Må ikke installeres udelukkende på gipsvæg.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Installationstrin
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figur 3: Overview of the 3-Step Easy Installation Process.
Trin 1: Fastgør beslag til TV
- Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
- Align the TV brackets with the mounting holes on the back of your TV.
- Vælg de passende skruer, skiver og afstandsstykker fra hardwaresættet, der passer til dit tv's monteringshuller.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Trin 2: Fastgør vægplade til væg
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Løft forsigtigt tv'et op med de medfølgende beslag, og hægt dem fast på vægpladen.
- Sørg for, at tv'et er sikkert monteret på vægpladen.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Betjeningsvejledning
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewing vinkler.
Justering Viewi vinkel
- Vip: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewkomfort.
- Drejelig: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.
- Udvidelse: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Nivellering: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Opretholdelse
Regelmæssig vedligeholdelse er med til at sikre, at dit TV-vægbeslag holder længe og fungerer sikkert.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
- Periodiske kontroller: Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme. Spænd dem igen om nødvendigt.
- Bevægelse: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Fejlfinding
Hvis du støder på problemer under eller efter installationen, kan du overveje følgende almindelige løsninger:
- TV'et er ikke i vater: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Fæstet føles løst: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Vanskeligheder med at tilpasse sig: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Manglende dele: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garanti og support
MOUNTUP TV wall mount series are backed by a 3-årig beskyttelsesplan. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
