VIAIR 00089 89P-RVS Dækpumpe til Klasse B Autocampere Brugsanvisning

Indledning

This manual provides essential instructions for the safe and efficient operation of your VIAIR 00089 89P-RVS Tire Inflator. Designed specifically for Class B Motorhomes, this rugged inflator ensures your tires maintain optimal pressure for safe travel and enhanced comfort.

Produkt overview

The VIAIR 00089 89P-RVS Tire Inflator is a compact and powerful unit built for reliability. It features a standard duty cycle of 25 minutes at 30 psi, capable of inflating 255/70/19.5 tires from 80 to 90 psi in under 2 minutes. The unit weighs under 5 lbs, making it highly portable.

Image: VIAIR 00089 89P-RVS Tire Inflator. The image displays the compact silver and black inflator unit, a coiled black air hose, red and black battery clamps, and a gray carrying bag. Various small nozzle attachments are also visible.

Nøglefunktioner:

• Standard duty cycle of 25 minutes at 30 psi.
• Inflates 255/70/19.5 tires from 80 to 90 psi in less than 2 minutes.
• Includes a 120-psi pressure gauge for accurate readings.
• Equipped with dual battery clamps for direct power connection.
• Features an LED work light/indicator light for visibility.
• Comes with a pre-installed 20-foot extended air hose for reach.
• Lightweight design, weighing under 5 lbs.

Opsætning

1. Placer oppusteren: Place the VIAIR 00089 on a stable, flat surface near the tire to be inflated. Ensure the unit's base is clear of debris.
2. Tilslut til strøm:
   • Open your vehicle's hood to access the battery.
   • Tilslut det røde batteri clamp to the positive (+) terminal of your vehicle's 12-volt battery.
   • Tilslut det sorte batteri clamp to the negative (-) terminal of your vehicle's 12-volt battery.
   • Sørg for, at forbindelserne er sikre.
3. Fastgør luftslange:
   • Remove the protective cap from the inflator's air outlet.
   • Connect the extended air hose to the inflator's air outlet using the quick-release mechanism. Pull back on the collar, push the hose fitting onto the outlet, and release the collar to secure.
   • Attach the brass air chuck at the end of the hose to the tire's valve stem. Screw it on tightly to prevent air leakage.

Betjeningsvejledning

1. Check Current Tire Pressure: Use the integrated 120-psi pressure gauge or a separate tire gauge to check the current tire pressure. Note the recommended pressure for your Class B Motorhome tires (typically found on a sticker inside the driver's side door or in the vehicle manual).
2. Pump dæk op:
   • Turn the inflator's power switch to the "ON" position. The LED work light will illuminate.
   • Monitor the pressure gauge as the tire inflates.
   • Once the desired pressure is reached, turn the inflator's power switch to the "OFF" position.
   • Disconnect the air chuck from the tire valve stem.
3. Airing Down (Optional): For off-road conditions, you may choose to "air down" your tires for increased traction and a smoother ride.
   • Specialized brass tire deflators (not included) can be screwed onto the valve stem to quickly release air to a preset pressure.
   • Always consult your vehicle manufacturer's recommendations or off-roading guides for appropriate aired-down pressures.
   • After airing down, remember to reinflate your tires to the recommended on-road pressure before returning to paved surfaces.

Opretholdelse

• Hold rent: Regularly inspect the inflator for dirt and debris, especially around the air intake. Keep the base clean to prevent foreign objects from entering the unit.
• Luftfilter: The inflator is equipped with an air filter. Check it periodically and replace if dirty to ensure optimal performance and longevity.
• Opbevaring: After use, disconnect all components and store them neatly in the provided carrying bag. Ensure the air hose is coiled properly to prevent damage.

Fejlfinding

• Ingen strøm: Sørg for batteri clamps are securely connected to the correct terminals (+ to red, - to black). Check your vehicle's battery for sufficient charge.
• Langsom inflation: Verify that the air chuck is tightly screwed onto the tire valve stem to prevent air leaks. Ensure the air hose connections are secure.
• Overophedning: If the unit becomes excessively hot during prolonged use, turn it off and allow it to cool down before resuming operation. Adhere to the recommended duty cycle.

Specifikationer

Garanti og support

For warranty information, technical support, or to purchase replacement parts, please refer to the official VIAIR website or contact VIAIR customer service directly. Keep your purchase receipt for warranty claims.