SAMSON CL8a Multi-Pattern Kondensatormikrofon Brugsanvisning

Indledning

The Samson CL8A is a large-diaphragm, multi-pattern condenser microphone designed to deliver balanced, detailed sound. It is suitable for various recording applications, including expressive solo vocals, acoustic instruments like guitar or flute, and upright bass. The microphone features three selectable pickup patterns: cardioid, omnidirectional, and bidirectional (figure 8), expanding its versatility for different miking techniques. Its dual 1.1" gold-sputtered 4-micron thick diaphragm ensures a lush, balanced sound. Additional features include a selectable two-pole high-pass filter at 100 Hz to reduce low-frequency noise and a switchable 10 dB pad for handling high sound pressure levels up to 147dB, making it suitable for recording loud sources like guitar cabinets, drums, and bass.

Hvad er der i æsken

Upon unboxing your SAMSON CL8a, you should find the following components:

• SAMSON CL8a Multi-Pattern Condenser Microphone
• Microphone Mount/Clip
• Bæretaske
• Instruktionsbog
• Garantioplysninger

Figure 1: The SAMSON CL8a microphone with its included mount.

Opsætning

Follow these steps to set up your SAMSON CL8a microphone:

1. Attach the Microphone Mount: Securely attach the provided microphone mount to the base of the CL8a microphone. Ensure it is tightened to prevent movement.
2. Mount to Stand: Connect the microphone (with its attached mount) to a microphone stand or boom arm. The mount includes a thread reducer for compatibility with various stand types.
3. Tilslut XLR-kabel: Plug a standard XLR cable into the XLR connector at the base of the microphone. Connect the other end of the XLR cable to an audio interface, mixer, or preamplifier that provides phantom power. The CL8a requires +48V phantom power to operate.
4. Placer mikrofonen: Place the microphone in the desired position relative to the sound source. Consider the chosen polar pattern for optimal sound capture.

Figure 2: The SAMSON CL8a mounted on a microphone stand, ready for use.

Drift

The SAMSON CL8a offers several features to optimize your recording experience:

• Valg af polært mønster: The microphone features a switch on the rear to select between three polar patterns:
  • Kardioide: Picks up sound primarily from the front, rejecting sound from the sides and rear. Ideal for solo vocals and instruments.
  • Omnidirektionel: Picks up sound equally from all directions. Suitable for capturing room ambiance or multiple sound sources.
  • Bidirectional (Figure 8): Picks up sound from the front and rear, rejecting sound from the sides. Useful for recording two vocalists facing each other or for specific stereo miking techniques.
• 10 dB Pad Switch: Located on the front of the microphone, this switch attenuates the input signal by 10 dB. Use this when recording very loud sound sources to prevent distortion and clipping.
• High-Pass Filter (100 Hz): Also on the front, this two-pole switch activates a high-pass filter at 100 Hz. This helps to reduce unwanted low-frequency noise such as stage rumble, air conditioning hum, or proximity effect.

Figur 3: Forside view of the SAMSON CL8a, showing the 10 dB pad and high-pass filter switches.

Figur 4: Bagside view of the SAMSON CL8a, highlighting the polar pattern selection switch.

Opretholdelse

To ensure the longevity and optimal performance of your SAMSON CL8a microphone, follow these maintenance guidelines:

• Opbevaring: Når mikrofonen ikke er i brug, skal den opbevares i den medfølgende bæretaske for at beskytte den mod støv, fugt og fysisk skade.
• Rensning: Use a soft, dry cloth to clean the microphone body. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
• Håndtering: Handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, which can affect its delicate internal components.
• Miljøforhold: Avoid exposing the microphone to extreme temperatures, high humidity, or direct sunlight for extended periods.

Fejlfinding

If you encounter issues with your SAMSON CL8a, refer to the following troubleshooting tips:

• Ingen lydoutput:
  • Ensure phantom power (+48V) is enabled on your audio interface or mixer. The CL8a requires phantom power to operate.
  • Check all XLR cable connections to ensure they are secure and properly seated.
  • Kontroller, at input gainen på din lydgrænseflade/mixer er indstillet korrekt.
  • Test med et andet XLR-kabel for at udelukke kabelfejl.
• Distorted or Clipped Sound:
  • Engage the 10 dB pad switch on the microphone if recording very loud sound sources.
  • Reducer input-gainen på dit lydkort eller din mixer.
  • Ensure the microphone is not too close to the sound source, especially for loud instruments or vocals.
• Excessive Low-Frequency Noise:
  • Activate the high-pass filter (100 Hz) switch on the microphone to reduce unwanted low-end rumble.
  • Adjust microphone placement to minimize proximity effect or environmental low-frequency interference.

Specifikationer

Garanti og support

For detailed warranty information and support, please refer to the documentation included with your product or visit the official SAMSON webGarantibetingelserne kan variere afhængigt af region og forhandler.