NILOX SAI PREMIUM L.I SINEWAVE 3000VA User Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Nilox SAI Premium Line Interactive Sinewave 3000VA Uninterruptible Power Supply (UPS). This device is designed to protect small networks, workstations, computers, and peripherals from power outages and electrical disturbances, ensuring the longevity of connected devices and data integrity.

The UPS features a perfect sine wave output in backup mode, an Automatic Voltage Regulator (AVR) for intelligent voltage management, and an LCD display for real-time monitoring of operational parameters. Please read this manual thoroughly before installation and use.

2. Sikkerhedsinstruktioner

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af UPS'en eller tilsluttet udstyr:

• Åbn ikke UPS'en casing. Der er ingen dele indeni, som brugeren kan servicere. Overlad al service til kvalificeret servicepersonale.
• Installer ikke UPS'en i direkte sollys, i nærheden af ​​varmekilder eller i miljøer med meget støv, fugtighed eller ætsende stoffer.
• Sørg for, at UPS'en er tilsluttet en jordet stikkontakt.
• Do not connect non-computer related equipment such as medical equipment, life support equipment, or household appliances to the UPS.
• Sørg for tilstrækkelig ventilation omkring UPS'en. Bloker ikke ventilationsåbningerne.
• In case of fire, use a dry chemical fire extinguisher. Do not use water.
• Disconnect the UPS from the AC power outlet before cleaning or performing any maintenance.

3. Pakkens indhold

Carefully unpack the UPS and check the contents. The package should contain:

• Nilox SAI Premium L.I Sinewave 3000VA UPS Unit
• Brugervejledning (dette dokument)
• Power cables (may vary by region, typically includes input power cable and output cables)
• USB communication cable (for software monitoring)

Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.

4. Produktet er slutview

4.1 Frontpanel

The front panel features the LCD display and the power button. The LCD provides real-time status updates, including input/output voltage, batteriniveau, belastningsprocenttage, and operational mode. The power button is used to turn the UPS on and off.

4.2 Bagpanel

The rear panel includes the AC input, multiple output sockets (IEC C13), a USB communication port, and ventilation fan. There are 6 output sockets in total, providing power to connected devices. The USB port allows connection to a computer for monitoring and management via the ViewPower software.

4.3 LCD-skærm

The LCD display provides comprehensive information about the UPS status:

• Input bindtage: Viser den indgående AC-volumentage.
• Udgang Voltage: Viser voltage supplied to connected devices.
• Batteriniveau: Indicates the current charge level of the internal batteries.
• Belastningsprocenttage: Viser procententage of the UPS's capacity currently being used by connected devices.
• AC-tilstand: Angiver, at UPS'en kører på strøm fra elnettet.
• Batteritilstand: Indicates the UPS is operating on battery power (during a power outagog).
• Overbelaste: Warning indicator if the connected load exceeds the UPS capacity.
• Lav batt: Warning indicator for low battery charge.
• Fejl: General fault indicator.

5. Opsætning

1. Pak UPS'en ud: Remove the UPS from its packaging and inspect it for any shipping damage.
2. Placering: Place the UPS in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture. Ensure there is sufficient space around the unit for proper airflow.
3. Tilslut til vekselstrøm: Connect the UPS's input power cable to a grounded wall outlet. The UPS will begin charging its internal batteries. For optimal performance, allow the UPS to charge for at least 8 hours before connecting any devices.
4. Tilslut enheder: Plug your computer, monitor, and other critical peripherals into the output sockets on the rear panel of the UPS. Do not overload the UPS beyond its rated capacity (2100W).
5. Første gang tændt: Press and hold the power button on the front panel for a few seconds until the UPS powers on and the LCD display illuminates.
6. Softwareinstallation (valgfrit): For advanced monitoring and management, connect the UPS to your computer via the USB cable and install the ViewPower software. The software can be downloaded from the official Nilox webwebsted.

6. Betjeningsvejledning

6.1 Tænd/sluk

• For at tænde: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display turns on.
• For at slukke: Press and hold the power button for approximately 3 seconds until the LCD display turns off. Ensure all connected devices are safely shut down before powering off the UPS.

6.2 Understanding UPS Modes

• AC-tilstand: The UPS is receiving utility power and providing conditioned power to connected devices. The batteries are being charged or maintained.
• Batteritilstand: Under en magt outage eller betydelig volumentage fluctuation, the UPS automatically switches to battery power to continue supplying power to connected devices. The LCD will indicate 'Batt. Mode' and an audible alarm may sound.
• AVR Mode: The Automatic Voltage Regulator (AVR) automatically corrects minor voltage fluctuations (sags or surges) without switching to battery power, thus preserving battery life.

6.3 ViewPower Software

De ViewPower software allows you to monitor the UPS status, configure settings, and perform controlled shutdowns of connected systems. Connect the UPS to your computer via the USB port and download the software from the official Nilox webwebsted. Se softwarens hjælpedokumentation for detaljerede instruktioner.

7. Vedligeholdelse

7.1 Udskiftning af batteri

The Nilox SAI Premium 3000VA UPS uses two 9Ah sealed lead-acid batteries. The typical lifespan of UPS batteries is 3-5 years, depending on usage and environmental conditions. When batteries need replacement, the UPS may indicate a 'Low Batt' or 'Fault' condition more frequently, or the backup time may significantly decrease.

Replacement Battery Code: 17NXBA9A00001 - 17NXBA9A00001T.

Forsigtighed: Battery replacement should only be performed by qualified service personnel. Batteries can pose a risk of electrical shock and burns from high short-circuit current. Always disconnect the UPS from the AC power and turn it off before attempting any battery maintenance. Dispose of old batteries properly according to local regulations.

7.2 Rengøring

To clean the exterior of the UPS, use a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the UPS is disconnected from the AC power outlet before cleaning. Keep ventilation openings clear of dust and debris to ensure proper cooling.

8. Fejlfinding

This section addresses common issues you might encounter with your UPS. If the problem persists after following these steps, please contact Nilox support.

9. Tekniske specifikationer

10. Garanti og support

The Nilox SAI Premium L.I Sinewave 3000VA UPS comes with a 3 års garanti on electronic parts. This warranty includes a convenient pickup and return service, ensuring that any necessary repairs or replacements are handled efficiently without additional cost for collection or delivery of the product.

For technical support, warranty claims, or further assistance, please visit the official Nilox website or contact your local Nilox service center. Ensure you have your product model number (NXGCLISW3K2X9V2) and proof of purchase available when contacting support.