Zacurate 500C Elite Fingertip Pulse Oximeter User Manual

1. Introduktion

The Zacurate 500C Elite Fingertip Pulse Oximeter is designed for non-invasive spot-check measurement of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. This device is intended for sports and aviation use only and is not a medical device. It is suitable for use at home, during sports activities, and high-altitude activities.

2. Sikkerhedsoplysninger

Please read all instructions carefully before using the device. Failure to follow instructions may result in inaccurate readings or device damage.

• This device is for sports and aviation use only. It is not intended for medical diagnosis or treatment.
• Brug ikke pulsoximeteret i et MRI- eller CT-miljø.
• Do not use the device on the same finger for more than 5 minutes continuously to avoid discomfort or swelling.
• Keep the device away from young children. Small parts may pose a choking hazard.
• Avoid using the device in direct sunlight or in areas with high humidity.
• Nedsænk ikke enheden i vand eller andre væsker.

3. Produktet er slutview

The Zacurate 500C Elite Fingertip Pulse Oximeter features an OLED display and a compact design for easy use.

Figure 1: Zacurate 500C Elite Pulse Oximeter. This image shows the overall design of the Zacurate 500C Elite Fingertip Pulse Oximeter with its OLED display.

Figure 2: Device Components. This image shows the Zacurate 500C Elite Pulse Oximeter with various parts labeled, including the Lanyard Loop Hole, Battery Cover, Blood Oxygen Saturation Level display, Pulse Rate display, Plethysmograph, One-Button Operation, and Finger Opening.

3.1 Komponenter

• OLED-skærm: Shows SpO2, Pulse Rate, Plethysmograph, and battery indicator.
• Power knap: For turning the device on/off and changing display modes.
• Finger Opening: Where the finger is inserted for measurement.
• Batterirum: Placeret på bagsiden af ​​enheden.
• Lanyard Loop Hole: Til fastgørelse af den medfølgende lanyard.

4. Opsætning

4.1 Pakkens indhold

Pakken indeholder:

• Zacurate 500C Elite Fingertip Pulse Oximeter
• 2 x AAA batterier
• Silikone Cover
• Snor
• Brugermanual

Figur 3: Pakkens indhold. This image displays the Zacurate 500C Elite Pulse Oximeter, its packaging box, a user manual, two AAA batteries, a silicone protective cover, and a lanyard.

4.2 Batteriinstallation

1. Åbn batteridækslet på bagsiden af ​​enheden.
2. Insert the two AAA batteries according to the polarity indicators (+/-) inside the compartment.
3. Luk batteridækslet forsvarligt.

4.3 Fastgørelse af snoren

Figure 4: Lanyard Attachment Steps. This image illustrates a three-step process for attaching the lanyard: 1. Insert the loop into the lanyard holes. 2. Thread the lanyard strap through the loop. 3. Pull the lanyard strap until it is tight and secured.

1. Insert the thin end of the lanyard loop into the lanyard hole on the device.
2. Thread the thicker part of the lanyard through the loop.
3. Pull gently to secure the lanyard.

5. Betjeningsvejledning

5.1 Tage en måling

1. Sørg for, at batterierne er korrekt installeret.
2. Åbn clamp af oximeteret.
3. Insert one finger (preferably the index finger) into the rubber opening of the oximeter, ensuring the fingernail is facing upwards towards the display.
4. Slip clamp.
5. Press the power button once to turn on the oximeter.
6. Keep your hand still during the measurement. Readings will appear on the display within a few seconds.
7. Enheden slukker automatisk efter 8 sekunders inaktivitet.

Figure 5: Proper Finger Placement. This image demonstrates a finger correctly inserted into the Zacurate 500C Elite Pulse Oximeter for measurement.

5.2 Vis information

The OLED display shows the following information:

• SpO2: Blood Oxygen Saturation Level (%).
• PRbpm: Pulse Rate (beats per minute).
• Plethysmograph: A waveform graph indicating pulse strength.
• Batteriindikator: Viser den resterende batterilevetid.

5.3 Display Modes and Brightness

Press the power button briefly while the device is on to cycle through 6 different display orientations. To adjust display brightness, press and hold the power button for approximately 1 second while the device is on.

Figure 6: Multiple Display Orientations. This image shows six different ways the information can be displayed on the oximeter screen, allowing for convenient viewfra forskellige vinkler.

6. Funktioner

• Auditory Alarm: Alerts the user when SpO2 and Pulse Rate values fall outside preset limits.
• Auditory Pulse Beeps: Provides an audible beep for each detected pulse.
• Justerbar displaylysstyrke: Allows customization of screen intensity.
• OLED Display with Plethysmograph: High-quality display showing both numerical values and a visual representation of pulse strength.

7. Vedligeholdelse og opbevaring

7.1 Rengøring

• Rengør oximeterets overflade med en blød kludampened with medical alcohol (70% isopropyl alcohol).
• Do not use abrasive cleaners or immerse the device in liquid.
• Ensure the device is dry before reuse.

7.2 Opbevaring

• Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Fjern batterierne, hvis enheden ikke skal bruges i længere tid, for at forhindre batterilækage.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

The Zacurate 500C Elite Fingertip Pulse Oximeter comes with a 12 måneders garanti. For technical support or warranty claims, please contact our USA-based support team.

11. Kontaktoplysninger

For any questions or further assistance regarding your Zacurate 500C Elite Pulse Oximeter, please use the following contact details:

• Telefon: 832-939-8290
• E-mail: cs@beyondmedshop.com
• Webwebsted: zacurate.com

12. Videoressourcer

No official product videos from the seller were available with specific embeddable URLs and metadata for inclusion in this manual.