1. Produktet er slutview
The TCP 07106 L9PLVD5041K is a 9-watt LED BR30 bulb designed as a direct replacement for traditional CFL (Compact Fluorescent Lamp) bulbs. It features a 4-pin (G24q/GX24q) base, operates on 120/277 volts, and emits a cool white light at 4100K. This LED bulb is ballast compatible and dimmable, offering energy efficiency and a long operational lifetime.
An image showing the TCP 07106 LED BR30 bulb. It features a white, reflector-style bulb head tapering down to a 4-pin base, designed for compatibility with CFL fixtures.
2. Sikkerhedsoplysninger
Please read and understand all instructions before installation and use. Retain this manual for future reference.
- Risiko for elektrisk stød: Always turn off power at the circuit breaker or fuse box before installing or servicing the fixture.
- Kun indendørs brug: This bulb is designed for indoor applications. Do not use in wet locations or where directly exposed to water.
- Ballast kompatibilitet: This LED bulb is designed to be ballast compatible. Ensure your existing ballast is compatible with LED PL lamps. Consult a qualified electrician if unsure.
- Dæmpbarhed: This product is dimmable. Ensure your dimmer switch is compatible with LED lighting to avoid performance issues or damage.
- Driftstemperatur: Do not install in fixtures that exceed the recommended operating temperature range.
- Må ikke skilles ad: Do not attempt to disassemble or modify the bulb. This will void the warranty and may cause damage or injury.
- Korrekt bortskaffelse: Bortskaf pæren i henhold til lokale regler.
3. Produktfunktioner
- Lyskildetype: LED
- Wattage: 9 watt
- Voltage: 120/277 volt
- Lysstyrke: 1150 lumen
- Farvetemperatur: 4100 Kelvin (Cool White)
- Pæreform Størrelse: BR30
- Basistype: 4-Pin (G24q/GX24q)
- Dæmpbar: Ja
- Gennemsnitlig levetid: 50,000 timer
- farvegengivelsesindeks (CRI): 80
- Glødende ækvivalent: 18 watt
- Certificering: UL, cUL
4. Opsætning og installation
This LED bulb is designed to replace existing CFL bulbs in compatible fixtures. Follow these steps for safe installation:
- Sluk for strømmen: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker or fuse box. Verify the power is off by attempting to turn on the light switch.
- Fjern eksisterende pære: Carefully remove the old CFL bulb from the fixture. Allow it to cool if it has been recently in use.
- Inspekter armatur: Check the fixture for any damage or wear. Ensure the socket is clean and free of debris.
- Isæt ny LED-pære: Align the 4 pins of the TCP 07106 LED bulb with the corresponding slots in the fixture's G24q/GX24q base. Gently push the bulb into the socket until it is firmly seated. Do not force the bulb, as this may damage the pins or the socket.
- Gendan strøm: Når pæren er sikkert installeret, skal du genoprette strømmen til armaturet ved afbryderen eller sikringsboksen.
- Test drift: Tænd lyskontakten for at bekræfte, at pæren fungerer korrekt.
Note: This bulb is ballast compatible. No ballast bypass is required for installation in fixtures with compatible electronic ballasts. If the bulb does not light up, ensure the ballast is functioning correctly and is compatible with LED PL lamps. Consult a qualified electrician if you encounter issues.
5. Betjeningsvejledning
The TCP 07106 LED BR30 bulb operates like a standard light bulb once installed. It is dimmable, allowing you to adjust the light output with a compatible dimmer switch.
- On/Off funktion: Use your existing light switch to turn the bulb on or off.
- Dæmpning: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve the desired brightness level. Ensure your dimmer is rated for LED loads to prevent flickering or damage.
6. Vedligeholdelse
The TCP 07106 LED BR30 bulb requires minimal maintenance due to its long lifespan.
- Rensning: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Udskiftning: With an average lifetime of 50,000 hours, frequent replacement is not anticipated. When replacement is necessary, follow the installation steps in Section 4.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pæren lyser ikke. |
|
|
| Pæren flimrer eller brummer. |
|
|
| Lysudbyttet er for lavt eller for højt. |
|
|
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport eller en kvalificeret elektriker.
8. Specifikationer
| Modelnummer | 07106 (L9PLVD5041K) |
| Mærke | TCP |
| Lyskildetype | LED |
| Wattage | 9 watt |
| Voltage | 120/277 volt |
| Lysstyrke | 1150 lumen |
| Farvetemperatur | 4100 Kelvin (Cool White) |
| Pære form størrelse | BR30 |
| Base Type | 4-Pin (G24q/GX24q) |
| Dæmpbar | Ja |
| Gennemsnitlig levetid | 50,000 timer |
| Color Rendering Index (CRI) | 80 |
| Glødelignende ækvivalent | 18 watt |
| Indendørs/Udendørs brug | Indendørs |
| Materiale | Kobber (interne komponenter) |
| Certificeringer | UL, cUL |
| Varens vægt | 6.7 ounce |
| Pakkedimensioner | 6.34 x 4.88 x 4.25 tommer |
9. Garanti og support
TCP products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or the official TCP website. In case of issues or questions not covered in this manual, please contact TCP customer support.
Fabrikant: TCP
UPC: 762148071068
Varenummer: 07106
For yderligere hjælp, besøg TCP Store on Amazon or the official TCP webwebsted.
