LETTSTRÆKNING 10255

LIGHTAILING LED Light Kit for LEGO Creator Expert The Assembly Square (Model 10255)

Instruktionsmanual

1. Produktet er slutview

This LIGHTAILING LED Light Kit is designed to illuminate the LEGO Creator Expert The Assembly Square building set (LEGO Model 10255). The kit enhances the visual appeal of your model by adding intricate lighting details.

Sættets indhold:

  • 5 USB Light kits
  • Instruktionsvejledning
  • Batteriboks
  • 1 USB-stik

The components are crafted from original materials and assembled by hand to ensure quality and compatibility.

Contents of the LIGHTAILING LED Light Kit package, including light strings, battery box, and instructions.
Figure 1: Package contents of the LIGHTAILING LED Light Kit. This image displays the various components included in the kit, such as individually packaged light strings, a battery box, and the instruction manual.

2. Opsætning og installation

The LIGHTAILING LED Light Kit is designed for integration with your existing LEGO Creator Expert The Assembly Square (Model 10255) set. Please note that the LEGO model itself is not included with this light kit.

Strømkrav:

  • Three (3) AA batteries (not included) are required for the battery box.
  • Alternatively, a USB charger can be used. Ensure the voltage is less than 5V to prevent damage to the lights.

Installationsvejledning:

  1. Refer to the included instruction guide for detailed, step-by-step installation procedures.
  2. Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components to prevent damage.
  3. The installation process may involve disassembling parts of your LEGO model to properly route and secure the light wires.
  4. Plan the placement of wires to ensure they are discreet and do not interfere with the model's structure or appearance.
Diagram showing steps for installing the LED light kit into a LEGO model.
Figur 2: Eksample installation steps. This diagram illustrates how to integrate the LED light components into the LEGO building set, showing careful placement of wires and lights.
Video 1: Demonstration of the LIGHTAILING LED Light Kit installed on the LEGO Creator Expert The Assembly Square. This video showcases the illuminated model from various angles, highlighting the effect of the installed lights.

3. Betjeningsvejledning

Once the LIGHTAILING LED Light Kit is fully installed and connected to a power source (either AA batteries in the battery box or a USB charger), the lights will illuminate your LEGO model.

  • For at tænde: Ensure batteries are correctly inserted into the battery box or the USB connector is plugged into a compatible 5V USB power source.
  • For at slukke: Disconnect the USB connector from the power source or remove the batteries from the battery box.

There are no additional controls for brightness or light patterns; the lights operate in a steady-on mode when powered.

4. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your LIGHTAILING LED Light Kit.

  • Rensning: Gently dust the LED lights and wires with a soft, dry cloth. Avoid using liquid cleaners directly on the electrical components.
  • Ledningshåndtering: Periodically check that all wires are securely in place and not pinched or strained. Re-route any loose wires to prevent damage.
  • Udskiftning af batteri: If using batteries, replace all three AA batteries simultaneously when lights begin to dim or cease to function. Do not mix old and new batteries.
  • Opbevaring: If storing the LEGO model with the light kit installed, ensure it is kept in a dry, dust-free environment away from direct sunlight and extreme temperatures.

5. Fejlfinding

If you encounter issues with your LIGHTAILING LED Light Kit, refer to the following troubleshooting steps:

  • Lysene lyser ikke:
    • Verify that the power source (batteries or USB charger) is correctly connected and functional.
    • If using batteries, ensure they are new and inserted with the correct polarity.
    • Check all connections between the light strings and the USB connector/battery box for secure fit.
    • Inspect wires for any visible damage, such as cuts or pinches.
  • Lights Are Dim:
    • If using batteries, they may be low and require replacement.
    • If using a USB charger, ensure it provides sufficient power and is functioning correctly.
  • Individual Lights Not Working:
    • Carefully check the connection of the specific light or light string.
    • Inspect the individual LED for physical damage.

Hvis disse trin ikke løser problemet, bedes du kontakte LIGHTAILINGs kundesupport for yderligere assistance.

6. Specifikationer

FeatureDetalje
MærkeBELYSNING
Modelnummer10255
Produktdimensioner7.68 x 5.71 x 1.77 tommer (emballage)
Varens vægt7.1 ounce
Strømkilde3 AA batteries (not included) or USB charger (<5V)
Producent anbefalet alder6 år og opefter
KompatibilitetLEGO Creator Expert The Assembly Square (Model 10255)

7. Garanti og support

LIGHTAILING is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, if you encounter any issues or have questions regarding your LED Light Kit, please contact LIGHTAILING customer service.

For support, refer to the contact information provided in your product packaging or visit the official LIGHTAILING webwebsted.

Relaterede dokumenter - 10255

Preview LIGHTAILING LED Lighting Kit Installation Guide for LEGO Creator Expert Corner Garage (10264)
Step-by-step instructions for installing the LIGHTAILING LED lighting kit on the LEGO Creator Expert Corner Garage set 10264. Includes warnings, assembly guidance, and contact information.
Preview LIGHTAILING Cozy House 31139 Belysningssæt Installationsvejledning | LGK569
Trinvise instruktioner til installation af LIGHTAILING LED-belysningssættet til LEGO Creator 3-i-1 Hyggeligt Hus 31139 (varenummer LGK569). Gør din byggeklodsmodel bedre med denne brugervenlige vejledning.
Preview Lightailing LED Lighting Kit Instructions for LEGO NASA Apollo Saturn V 21309
Detailed instructions for installing the Lightailing LED lighting kit (BX118) for the LEGO Creator Expert NASA Apollo Saturn V 21309 set. This guide provides step-by-step assembly for enhancing the model with lights.
Preview Lightailing LED Light Kit for LEGO Assembly Square 10255 Installation Guide
Detailed instructions for installing the Lightailing LED light kit for the LEGO Creator Expert Assembly Square (10255) set. Learn how to illuminate your model with step-by-step guidance.
Preview Lightailing LED Lighting Kit for LEGO Creator Expert NASA Apollo 11 Lunar Lander 10266 - Installation Guide
Detailed instructions for installing the Lightailing LED lighting kit (LGK211) for the LEGO Creator Expert NASA Apollo 11 Lunar Lander (10266) set. Enhance your model with custom lighting.
Preview Lightailing LED Lighting Kit for LEGO Parisian Restaurant 10243
Installation guide for the Lightailing LED lighting kit for the LEGO Creator Expert Parisian Restaurant (10243) set. Enhance your LEGO model with custom lighting.