NDS Imanager

NDS Imanager Wireless Battery Display User Manual

Model: Imanager (RG-052797)

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your NDS Imanager Wireless Battery Display. Please read this manual thoroughly before using the device to ensure safe and efficient operation. The NDS Imanager is designed to monitor the status of your battery system, providing real-time data on voltage, capacity, and other critical parameters.

2. Produktet er slutview

The NDS Imanager system consists of a wireless display unit and a BlackBox control unit. The display unit provides a user-friendly interface to view battery information, while the BlackBox unit connects directly to your battery system to collect data.

NDS Imanager Wireless Battery Display unit showing battery status and settings icon.

Figure 2.1: NDS Imanager Wireless Battery Display Unit. This image shows the display interface, indicating voltage (e.g., 12.8V) and charge levels for two batteries, along with a settings icon.

NDS Imanager BlackBox control unit with connection diagrams.

Figure 2.2: NDS Imanager BlackBox Control Unit. This image displays the compact BlackBox unit, which serves as the central data collection and transmission component for the battery display system.

3. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade og beskadigelse af enheden:

  • Afbryd altid strømmen, før du installerer eller servicerer enheden.
  • Ensure all connections are secure and correctly polarized to avoid short circuits.
  • Do not expose the device to water, extreme temperatures, or direct sunlight for prolonged periods.
  • Only use the device for its intended purpose as a battery monitoring display.
  • Refer to a qualified technician for any repairs or complex installations.

4. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • NDS Imanager Wireless Battery Display Unit
  • NDS Imanager BlackBox Control Unit
  • Connection Cables (specific to your battery system)
  • Monteringshardware
  • Brugervejledning (dette dokument)

5. Opsætning og installation

Follow these general steps for installing your NDS Imanager system. Specific wiring diagrams may vary based on your vehicle or application.

  1. Mounting the BlackBox Unit: Choose a dry, protected location near your battery bank for the BlackBox. Secure it using the provided mounting hardware.
  2. Connecting the BlackBox to Batteries: Connect the BlackBox unit to your 12V battery system according to the wiring instructions provided with the unit. Ensure correct polarity for all connections. The BlackBox is designed to monitor up to two batteries.
  3. Mounting the Display Unit: Select a convenient location for the wireless display unit, such as a dashboard or control panel. Ensure it is easily visible and accessible. Secure it using appropriate mounting methods.
  4. Powering the Display Unit: The display unit typically receives power wirelessly from the BlackBox or via a separate 12V connection. Refer to the specific wiring diagram for your model.
  5. Indledende parring: Once both units are powered, they should automatically pair. If not, consult the troubleshooting section or the specific pairing instructions for your model.
NDS Imanager Wireless Battery Display installed in a wooden panel of a vehicle.

Figur 5.1: Eksample Installation of the NDS Imanager Display. This image shows the display unit neatly integrated into a wooden interior panel, demonstrating a typical installation scenario in a recreational vehicle or similar setup.

6. Betjeningsvejledning

The NDS Imanager display provides real-time information about your battery system.

6.1. Skærmgrænseflade

The main screen typically shows:

  • Batteri Voltage: Nuværende voltage reading for each connected battery (e.g., 12.8V).
  • Batteriopladningsniveau: Graphical representation of the remaining charge for each battery.
  • Dato og tid: Nuværende dato og klokkeslæt.
  • Indstillingsikon: Tap to access configuration options.
NDS Imanager Wireless Battery Display showing detailed battery information.

Figure 6.1: Detailed Display View. This image illustrates the display showing individual battery voltages (12.8V, 12.7V), charge levels for two batteries (labeled 1 and 2), and icons indicating charging status or warnings.

6.2. Adgang til Indstillinger

Tap the 'Settings' icon on the display to enter the configuration menu. Here you can:

  • Juster dato og tid.
  • Configure battery types and capacities.
  • Set alarms for low voltage eller kapacitet.
  • View historical data (if available).

Navigate through the menus using the touch interface. Save any changes before exiting the settings.

7. Vedligeholdelse

The NDS Imanager requires minimal maintenance.

  • Rensning: Wipe the display screen with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Forbindelser: Periodically check all electrical connections to the BlackBox unit to ensure they are tight and free from corrosion.
  • Softwareopdateringer: Check the NDS website for any available firmware updates for your Imanager model.

8. Fejlfinding

If you encounter issues with your NDS Imanager, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Skærmen er tom eller tænder ikke.No power to BlackBox or display unit.Check all power connections to the BlackBox and display. Ensure the battery is charged.
No battery data displayed.BlackBox not connected to batteries; Wireless communication issue.Verify BlackBox battery connections. Ensure display and BlackBox are within range and not obstructed. Try restarting both units.
Forkert voltage/capacity readings.Incorrect settings; Calibration needed.Check battery type and capacity settings in the display menu. Consult the manual for calibration procedures if applicable.

9. Specifikationer

Technical specifications for the NDS Imanager Wireless Battery Display (Model RG-052797):

FeatureSpecifikation
MærkeNDS
ModelnavnImanager
ModelnummerRG-052797
Voltage12 volt
Battery Capacity (Max)150 Ah (Amptidligere timer)
BattericellesammensætningNiMH (Nickel-Metal Hydride) - Note: This refers to the internal battery type if applicable, not the monitored battery.
StrømkildetypeBatteridrevet
Varens vægt0.64 kilo
Pakkedimensioner17.8 x 14.3 x 7.9 cm

10. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NDS webwebsted. Gem din købsbevis til garantikrav.

Relaterede dokumenter - Imanager

Preview ZeroWire Mobile brugermanual - NDS kirurgisk billeddannelse
Omfattende brugermanual til NDS ZeroWire Mobile, der beskriver installation, betjening, vedligeholdelse, sikkerhed og specifikationer for dette supportsystem til medicinsk billeddannelsesudstyr.
Preview NDS SUNCONTROL2 brugermanual til SCE 320 og SCE 360
Denne brugermanual indeholder detaljerede oplysninger om NDS SUNCONTROL2 solcelleregulatoren, herunder dens funktioner, betjening, installation og tekniske specifikationer for modellerne SCE 320 og SCE 360. Den dækker sikkerhedsinstruktioner, pakkens indhold, valg af ladekurve, LED-indikatorer, udskiftning af sikringer, ledningsdiagrammer og ofte stillede spørgsmål.
Preview Dura Slope System ProfileModsatrettet fald uden neutrale farver
System profile med detaljer om den modsatrettede faldkonfiguration for Dura Slope-kanaler, inklusive målinger og specifikationer som DS-340 og DS-091N.
Preview NDS Radiance G2 HB 26" brugermanual - opsætning, betjening og specifikationer
Omfattende brugermanual til NDS Radiance G2 HB 26" medicinsk skærm, der dækker installation, betjening, fejlfinding og tekniske specifikationer.
Preview NDS POWERSWITCH PS 12-100 Brugermanual - Batterivælger
Brugermanual til NDS POWERSWITCH PS 12-100, en batterivælgerkontakt designet til fritidskøretøjer. Lær om dens funktioner, betjening, tilslutninger, tekniske specifikationer og sikkerhedsinstruktioner.
Preview Brugermanual til NDS SUNCONTROL2 MPPT solcelleregulator
Brugermanual til NDS SUNCONTROL2 MPPT solcelleregulator, der dækker modellerne SC320M og SC350M. Indeholder sikkerhedsinstruktioner, pakkeindhold, beskrivelse, betjening, installation, valg af ladekurve, LED-indikatorer, udskiftning af sikringer, tekniske funktioner, ofte stillede spørgsmål og garantioplysninger.