Maxxima MEW-USB480C

Maxxima USB Wall Outlet Receptacle Instruction Manual

Model: MEW-USB480C

Indledning

This manual provides instructions for the installation, operation, and maintenance of the Maxxima USB Wall Outlet Receptacle (Model MEW-USB480C). This device integrates two standard AC outlets with one USB-A and one USB-C charging port, offering a versatile power solution for various electronic devices.

Sikkerhedsoplysninger

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. INSTALLATION REQUIRES KNOWLEDGE OF ELECTRICAL WIRING SYSTEMS. IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION. CONTACT A QUALIFIED ELECTRICIAN.

  • Sluk for strømmen ved afbryderen eller sikringsboksen før installation.
  • Use only with copper wire. Do not use with aluminum wire.
  • Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
  • Denne enhed er kun beregnet til indendørs brug.
  • Overskrid ikke enhedens elektriske mærkninger.
  • Tamper-resistant shutters are designed to prevent insertion of foreign objects into the receptacle openings.

Pakkens indhold

  • Maxxima USB Wall Outlet Receptacle (MEW-USB480C)
  • Vægplade
  • Klemmeskruer

Specifikationer

FeatureSpecifikation
ModelnummerMEW-USB480C
Bedømmelse af beholder15 Amp125 V AC
USB-klassificeringI alt 4.8 Amp, 5 VDC (1 USB-A, 1 USB-C)
Kompatible enhederSmartphones, Tablets, MP3 Players, Gaming Devices
MaterialeKobber
FarveHvid
Dimensioner (pakke)5.28 x 2.99 x 1.97 tommer
Vægt (pakke)5.5 ounce
CertificeringerUL-listet
FunktionerTamper-Resistant (TR) Shutters, Smart Identification Chip

Opsætning og installation

Før du begynder: Ensure power is OFF at the circuit breaker. If you are unsure about electrical wiring, consult a qualified electrician.

  1. Sluk for strømmen: Locate the circuit breaker controlling the outlet where you intend to install the receptacle. Switch the breaker to the OFF position. Verify power is off using a voltage tester.
  2. Fjern gammel beholder: Unscrew and carefully pull the existing receptacle from the wall box. Disconnect the wires from the old receptacle, noting which wire was connected to which terminal (Hot, Neutral, Ground).
  3. Forbered ledninger: If necessary, strip approximately 1/2 inch of insulation from the ends of the wires. Ensure wires are straight and free of nicks.
  4. Examine the Receptacle: Familiarize yourself with the physical components of the new receptacle.
    Front view of Maxxima USB Wall Outlet Receptacle without wall plate, showing mounting tabs.
    Front view without wall plate, showing mounting tabs.
    Side view of Maxxima USB Wall Outlet Receptacle, showing depth and wiring terminals.
    Side view, illustrating depth and wiring access.
  5. Tilslut ledninger:
    • Tilslut VARMT (black or red) wire to the brass-colored screw terminals.
    • Tilslut NEUTRAL (white) wire to the silver-colored screw terminals.
    • Tilslut JORD (bare copper or green) wire to the green screw terminal.

    Ensure all connections are tight and secure. For back-wiring, insert the stripped wire into the appropriate hole and tighten the screw.

    Tilbage view of Maxxima USB Wall Outlet Receptacle, showing wiring diagram and ground screw.

    This image shows the back of the Maxxima USB Wall Outlet Receptacle, detailing the wiring instructions (HOT, WHITE, GR) and the ground screw for proper electrical connection.

  6. Monter stikkontakt: Carefully push the wired receptacle back into the wall box. Secure it with the mounting screws provided.
  7. Installer vægplade: Attach the included wall plate over the receptacle and secure it with the provided screws.
  8. Gendan strøm: Turn the circuit breaker back to the ON position.
  9. Test funktionalitet: Test both the standard AC outlets and the USB charging ports to ensure proper operation.Front view of Maxxima USB Wall Outlet Receptacle with wall plate installed.

    This image shows the Maxxima USB Wall Outlet Receptacle fully installed with its white wall plate, featuring two standard AC outlets, one USB-A port, and one USB-C port.

Betjeningsvejledning

The Maxxima USB Wall Outlet Receptacle provides both standard AC power and USB charging capabilities.

  • Standard AC-udtag: Insert any standard 2-prong or 3-prong electrical plug into the AC outlets. These outlets are tamper-resistant for safety.
  • USB -opladningsporte: The receptacle features one USB-A port and one USB-C port. Connect your compatible device's charging cable to the appropriate USB port.
  • Smart opladning: The built-in smart identification chip recognizes the charging requirements of your connected devices (e.g., smartphones, tablets, MP3 players) and optimizes the charging speed up to a combined total of 4.8 Amps.
  • Overbelastningsbeskyttelse: If the total power demand from connected USB devices exceeds 4.8 Amps, the smart detection system will reduce the charging rate to protect your devices and the receptacle.
Maxxima USB Wall Outlet Receptacle installed in a wall, charging a smartphone via USB-A port.
Charging a smartphone via the USB-A port.
Close-up of Maxxima USB Wall Outlet Receptacle, charging a smartphone via USB-C port.
Charging a smartphone via the USB-C port.

Opretholdelse

The Maxxima USB Wall Outlet Receptacle requires minimal maintenance.

  • Rensning: Disconnect power at the circuit breaker before cleaning. Wipe the surface with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  • Inspektion: Periodically inspect the receptacle for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.

Fejlfinding

ProblemMulig årsagLøsning
No power from AC outlets.Afbryderen er udløst; løs ledningsforbindelse.Check and reset the circuit breaker. Verify wiring connections are secure (turn off power first).
USB-porte oplades ikke.Device incompatibility; faulty cable; total current draw exceeds 4.8A; loose connection.Try a different USB cable. Test with another device. Ensure total current draw is within 4.8A. Some high-power devices (e.g., certain iPads, MacBooks, or specific Android phones) may require higher power delivery than this unit provides via USB-C.
Opladningen er langsom.Multiple devices connected; device requires higher charging rate; cable quality.Disconnect other USB devices. Use a high-quality charging cable. Note that the total output is 4.8A shared between both USB ports.
Wall plate does not sit flush.Receptacle not fully seated in wall box; wires not properly arranged.Ensure wires are neatly folded into the wall box. Gently push the receptacle fully into the box before tightening mounting screws.

Garanti og support

This Maxxima USB Wall Outlet Receptacle (Model MEW-USB480C) is backed by a 1-års garanti fra købsdatoen.

For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Refer to the Maxxima webwebstedet eller produktemballagen for aktuelle kontaktoplysninger.

Fabrikant: Maxxima

Relaterede dokumenter - MEW-USB480C

Preview Maxxima MEW-USB482C TR vægstikkontakt med USB-A og USB-C porte installationsvejledning
Installations- og sikkerhedsinstruktioner til Maxxima MEW-USB482C TampErstatningsbestandig TR-vægstikkontakt med USB-A- og USB-C-opladningsporte. Denne højhastighedsopladningskontakt har 2 standardudgange og integrerede USB C/A-porte, designet til smartenheder. Inkluderer ledningsdiagrammer og garantioplysninger.
Preview Maxxima MEW-RS100W enkeltpolet afbryder med strømudtag installationsvejledning
Installationsvejledning og garantioplysninger til Maxxima MEW-RS100W enpolet afbryder med stikkontakt. Lær, hvordan du installerer og tilslutter enheden sikkert.
Preview Installationsvejledning til Maxxima MEW-DM600-seriens 3-vejs skydedæmper
Omfattende installationsvejledning til Maxxima MEW-DM600, MEW-DM600A, MEW-DM600B, MEW-DM600V 3-vejs og enkeltpolede skydedæmpere, der dækker ledningsføring, montering og betjening.
Preview Installationsvejledning til Maxxima enpolet afbryder med stikkontakt
Omfattende installationsvejledning til Maxxima enpolet afbryder med stikkontakt (model MEW-RS100W), inklusive sikkerhedsadvarsler, specifikationer og ledningsdiagrammer.
Preview Installationsvejledning til Maxxima MEW-V1200S indendørs væglampe
Trinvise installationsvejledninger til Maxxima MEW-V1200S indendørs væglampe. Indeholder sikkerhedsadvarsler, forholdsregler, ledningsføringsoplysninger og garantioplysninger.
Preview Installationsvejledning til Maxxima MEW-V1100B indendørs væglampe
Trinvise instruktioner til installation af Maxxima MEW-V1100B indendørs væglampe, inklusive sikkerhedsforanstaltninger, ledningsføring, montering og garantioplysninger.