Maxell MC-EX3551 3LCD-projektor brugermanual

1. Introduktion

This manual provides essential instructions for the safe and efficient operation of your Maxell MC-EX3551 3LCD Projector. Please read this manual thoroughly before using the projector and retain it for future reference. The Maxell MC-EX3551 is a high-performance 3LCD projector designed for clear and vibrant presentations with 3700 ANSI lumens brightness and XGA (1024 x 768) resolution.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre brand, elektrisk stød eller personskade.

• Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig plads omkring projektoren for korrekt luftgennemstrømning.
• Se ikke direkte ind i projektorlinsen, når lamp er tændt. Det skarpe lys kan beskadige dine øjne.
• Do not place the projector on an unstable cart, stand, or table. It may fall, causing serious injury and damage.
• Udsæt ikke projektoren for regn eller fugt for at mindske risikoen for brand eller elektrisk stød.
• Overlad al service til kvalificeret servicepersonale. Forsøg ikke selv at åbne eller reparere projektoren.
• Brug kun den netledning, der følger med projektoren, eller en godkendt erstatningsledning.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Maxell MC-EX3551 3LCD Projector
• Strømledning
• Fjernbetjening med batterier
• VGA-kabel
• Brugervejledning (dette dokument)
• Calibration of device, testing with picture alignment and focus (as per product information)

4. Produktet er slutview

Gør dig bekendt med de forskellige dele og tilslutninger på din projektor.

Figur 4.1: Forside View. This image displays the front of the Maxell MC-EX3551 projector, highlighting the main projection lens. The lens is centrally located, allowing for image output.

Figur 4.2: Øverst View. This image shows the top panel of the projector, featuring the control buttons for power, input selection, and menu navigation. The focus and zoom adjustment rings are also visible near the lens area.

Figur 4.3: Side View. This image illustrates one side of the projector, displaying prominent ventilation grilles for heat dissipation and two audio input ports.

Figur 4.4: Bagside View. Dette billede giver en detaljeret view of the rear panel, showcasing all available input and output ports including COMPUTER IN 1 (VGA), CONTROL (RS-232C), USB Type B, USB Type A, HDMI 1, HDMI 2, LAN, AUDIO IN 3 (RCA), VIDEO, and the AC power inlet.

5. Opsætning

5.1 Projektorplacering

Place the projector on a stable, level surface or mount it securely to a ceiling. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size. Refer to the projection distance chart (not included in this manual, typically found in a separate setup guide) for optimal placement.

5.2 Tilslutning af enheder

Connect your source devices (e.g., laptop, Blu-ray player) to the projector using the appropriate cables.

• HDMI: For digital video and audio, connect an HDMI cable from your source device to either HDMI 1 or HDMI 2 port på projektoren.
• VGA: For analog video, connect a VGA cable from your computer to the COMPUTER I 1 havn.
• LAN: For network control and monitoring, connect an Ethernet cable to the LAN havn.
• Lyd: Connect external audio sources to the LYD IND porte efter behov.
• Magt: Connect the supplied power cord to the projector's AC inlet and then to a power outlet.

6. Betjening af projektoren

6.1 Tænd/sluk

• For at tænde skal du trykke på STANDBY/ON knappen på kontrolpanelet eller fjernbetjeningen. Strømindikatoren lyser.
• For at slukke skal du trykke på STANDBY/ON button again. A confirmation message may appear; press the button a second time to confirm shutdown. Allow the projector to cool down before unplugging.

6.2 Valg af indgangskilde

Tryk på INPUT button on the control panel or remote control to cycle through available input sources (HDMI 1, HDMI 2, Computer 1, Video, etc.) until your desired source is displayed.

6.3 Billedjustering

• Fokus: Drej på FOKUS ring on the lens until the image is sharp and clear.
• Zoom: Drej på ZOOM ringen på objektivet for at justere billedstørrelsen.
• Keystone-korrektion: If the image appears trapezoidal, use the keystone correction function in the projector's menu to square the image.

6.4 Menunavigation

Tryk på MENU button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and the ENTER button to select. Press MENU igen for at forlade.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger projektorens levetid.

• Rengøring af linser: Tør forsigtigt linsen af ​​med en blød, fnugfri klud, der er specielt designet til optiske overflader. Brug ikke slibende rengøringsmidler.
• Rengøring/udskiftning af luftfilter: Periodically clean the air filter to prevent dust buildup, which can affect cooling and image quality. Refer to the projector's on-screen menu for filter usage time. Replace the filter when necessary.
• Lamp Omsorg: Lamp har en begrænset levetid. Når lamp indicator lights up or a message appears, it's time to replace the lamp. Always use genuine Maxell replacement lamps.
• Udvendig rengøring: Tør projektorens yderside af med en blød, tør klud. Brug en let tør klud til genstridigt snavs.amp klud og mildt rengøringsmiddel, og tør derefter af.

8. Fejlfinding

Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Maxell website. Do not attempt to service the projector yourself, as this may void your warranty.

For further assistance, contact Maxell customer support through their official channels.