Einhell TE-CD Power X-Change 18-Volt Cordless Drill/Driver Kit

1. Sikkerhedsinstruktioner

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

1.1 Generel sikkerhed

• Brug altid passende personlige værnemidler, herunder øjenbeskyttelse, høreværn og handsker.
• Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.

1.2 Batterisikkerhed

• Use only the specified charger for the battery pack. Using any other charger may create a risk of injury and fire.
• Batteripakker må ikke skilles ad, åbnes eller makuleres.
• Protect battery packs from heat and fire. Avoid storage in direct sunlight.
• In case of battery leakage, avoid contact with skin and eyes. If contact occurs, wash with plenty of water and seek medical advice.

ADVARSEL: Dette produkt kan udsætte dig for kemikalier, som staten Californien ved kan forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.

2. Produktet er slutview

The Einhell TE-CD 18/2 Li Kit is a versatile cordless drill/driver designed for various tasks around the home, workshop, and garage. It is part of the Einhell Power X-Change family, allowing for battery interchangeability across a wide range of tools.

2.1 Nøglefunktioner

• Power X-Change-system: Utilizes the 18-Volt battery system, providing compatibility with all Einhell Power X-Change tools and garden equipment.
• Momentjustering: Features 21 torque settings and a 2-speed gearing system, allowing precise control for different materials and applications. Maximum torque of 44 Nm.
• Ergonomisk design: Equipped with a soft grip handle for comfortable and extended operation, reducing user fatigue.
• Integreret LED lys: An LED light is included to illuminate the work area, improving visibility in dimly lit spaces.
• Quick-Stop Function: Ensures immediate stopping of the chuck for enhanced safety and control.

2.2 Medfølgende komponenter

• Cordless Drill/Driver (TE-CD 18/2 Li)
• 1.5 Ah litium-ion-batteri
• Hurtigoplader
• Screw Driver/Drill Bits (3 drill bits, 4 Phillips screwdriver bits)
• LED Lamp (TE-CL 18Li)
• USB Charger Adapter (with 1A and 2.1A 5V ports)
• Bælteclips
• Tool Bag for transport and storage

3. Opsætning

3.1 Opladning af batteriet

1. Connect the fast charger to a standard 110V power outlet.
2. Slide the 1.5 Ah Lithium-Ion battery onto the charger until it clicks into place.
3. The charger's indicator lights will show the charging status. A fully discharged 1.5 Ah battery typically charges in approximately 30 minutes.
4. Når det er fuldt opladet, skal du fjerne batteriet fra opladeren.

3.2 Montering/fjernelse af batteriet

• To attach: Align the battery with the base of the drill/driver and slide it in until it locks securely.
• To remove: Press the battery release button(s) on the sides of the battery and slide it out.

3.3 Montering af bore-/skruetrækkerbits

• Ensure the drill/driver is switched off and the direction switch is in the center (locked) position.
• Twist the keyless chuck counter-clockwise to open the jaws.
• Insert the desired drill or screwdriver bit into the chuck.
• Drej spændepatronen med uret for at stramme kæberne sikkert omkring boret. Sørg for, at boret er centreret og fastholdt.

4. Betjeningsvejledning

4.1 Selecting Speed and Torque

• Hastighedsvalg: Use the gear selector switch on top of the drill to choose between two speeds: Low speed (Gear 1, approx. 0-350 RPM) for high torque applications like driving screws, and High speed (Gear 2, approx. 0-1250 RPM) for faster drilling.
• Momentindstilling: Rotate the torque collar behind the chuck to select the desired torque setting (1-20) or the drill mode (drill icon). Lower settings are for smaller screws or softer materials, while higher settings and drill mode are for larger screws or drilling.

4.2 Boring og skruning

1. Vælg den passende hastigheds- og momentindstilling til din opgave.
2. Set the direction switch (forward/reverse) to the desired rotation. For driving screws or drilling, set it to forward.
3. Placer boret på emnet.
4. Press the trigger switch to start the drill. The integrated LED light will illuminate the work area.
5. Påfør et konstant, jævnt tryk. Slip aftrækkeren, når skruen er i niveau, eller koblingen aktiveres, ved skruning. Fortsæt, indtil den ønskede dybde er nået, ved boring.

4.3 Brug af LED Lamp

• Attach a charged Power X-Change battery to the base of the LED lamp.
• Tryk på tænd/sluk-knappen på lamp at tænde den. Den lamp offers two settings for diffusion, allowing adjustment of the light spread.
• Lamp can be positioned to direct light precisely where needed, enhancing visibility in dark or confined spaces.

4.4 Using the USB Charger Adapter

• Attach a charged Power X-Change battery to the USB charger adapter.
• Connect your USB-powered device (e.g., smartphone, tablet) to one of the two USB ports (1A or 2.1A) on the adapter.
• The adapter will begin charging your device, providing portable power from your Einhell battery.

4.5 Officielle produktvideoer

5. Vedligeholdelse

5.1 Rengøring

• Rengør regelmæssigt værktøjets ventilationsåbninger for at forhindre overophedning.
• Tør værktøjets yderside af med en blød, tør klud.amp klæde. Brug ikke skrappe rengøringsmidler eller opløsningsmidler.
• Clean the chuck jaws periodically to ensure proper gripping of bits.

5.2 Opbevaring

• Opbevar værktøjet og batterierne et tørt, køligt sted, væk fra direkte sollys og fugt.
• For long-term storage, ensure batteries are partially charged (around 50%) to maintain their lifespan.
• Keep all components in the provided tool bag to protect them from dust and damage.

6. Fejlfinding

This section addresses common issues you might encounter with your Einhell TE-CD Power X-Change drill/driver kit.

7. Specifikationer

8. Garanti og support

Einhell warrants all new products for to år fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims, technical support, or any inquiries regarding your Einhell product, please refer to the contact information provided in your product packaging or visit the official Einhell USA webwebsted.