CUSTOM SW-709N

CUSTOM Drypfast stopur SW-709N brugsanvisning

1. Introduktion

Tak for købetasing the CUSTOM Drip-proof Stopwatch SW-709N. This manual provides detailed instructions for the proper use, setup, and maintenance of your stopwatch. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

CUSTOM Drip-proof Stopwatch SW-709N front view, displaying 23:59:59 and 'WATER RESISTANT' text.

Billede 1: Front view of the CUSTOM Drip-proof Stopwatch SW-709N. The display shows 23 hours, 59 minutes, and 59 seconds, with indicators for days of the week and "WATER RESISTANT" at the bottom. Buttons for SPLIT/RESET, LIGHT, MODE, and START/STOP are visible around the bezel.

The SW-709N is a digital stopwatch designed for various timing applications. It features an IPX4 drip-proof rating, a large LCD display, and an EL backlight for visibility in low-light conditions. It also includes date, time, alarm, and hourly chime functions.

2. Opsætning

2.1 Batteriinstallation

The stopwatch operates on one CR-2032 coin battery. The battery included with the product is for testing purposes only and may have a limited lifespan. For regular use, it is recommended to replace it with a new battery.

  1. Find batterirummet på bagsiden af ​​stopuret.
  2. Åbn forsigtigt batteridækslet med en lille skruetrækker.
  3. Insert one CR-2032 coin battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Luk dækslet til batterirummet forsvarligt.

2.2 Indstilling af starttidspunkt og dato

After battery installation, the stopwatch may require initial time and date setting. Refer to the "Operating Instructions" section for details on how to adjust these settings using the MODE and SPLIT/RESET buttons.

3. Betjeningsvejledning

3.1 Knapfunktioner

3.2 Visning af tid og dato

The stopwatch can display the date (year, month, day) and time (hour, minute, second). The time display can be switched between 12-hour and 24-hour formats.

  1. Tryk på MODE button to navigate to the time display mode.
  2. Sådan indstilles tid og dato:
    • I tidsvisningstilstand skal du trykke på og holde MODE knappen, indtil displayet blinker.
    • Brug SPLIT/NULSTIL knappen for at justere den blinkende værdi.
    • Tryk på START/STOP button to move to the next setting (e.g., seconds, minutes, hours, day, month, year, 12/24h format).
    • Når alle indstillinger er færdige, skal du trykke på MODE knappen for at afslutte indstillingstilstand.

3.3 Stopursfunktion

The stopwatch can measure time up to 23 hours, 59 minutes, and 59 seconds, with a minimum measurement of 1/100th of a second for the first 29 minutes, 59 seconds, and 99 hundredths.

  1. Tryk på MODE button to navigate to the stopwatch display mode.
  2. Tryk på START/STOP knappen for at starte tidtagningen.
  3. To record a split time, press the SPLIT/NULSTIL button while the stopwatch is running. The split time will be displayed temporarily. Press SPLIT/NULSTIL igen for at vende tilbage til spilletiden.
  4. Tryk på START/STOP knappen for at sætte timeren på pause.
  5. Trykke START/STOP igen for at genoptage timingen.
  6. For at nulstille stopuret skal du trykke på START/STOP button to stop the timer, then press the SPLIT/NULSTIL knap.

3.4 Alarmfunktion

The stopwatch includes an alarm function with a bell mark light and a buzzer that sounds for approximately 1 minute.

  1. Tryk på MODE button to navigate to the alarm setting mode.
  2. Sådan indstilles alarmtidspunktet:
    • In alarm mode, press and hold the MODE knappen, indtil alarmtidspunktet blinker.
    • Brug SPLIT/NULSTIL button to adjust the flashing value (hours, then minutes).
    • Tryk på START/STOP knappen for at skifte mellem time- og minutindstillinger.
    • Tryk på MODE knappen for at afslutte indstillingstilstand.
  3. For at aktivere/deaktivere alarmen skal du trykke på START/STOP button in alarm mode. An alarm icon will appear/disappear on the display.

3.5 Hourly Klokkefunktion

Hourly chime provides an audible alert at the top of every hour (00 minutes).

  1. I tidsvisningstilstand skal du trykke på MODE button to cycle through modes until you reach the hourly chime setting (often indicated by a small icon).
  2. Tryk på START/STOP knappen for at skifte til hourly chime ON or OFF. An icon will indicate its status.

3.6 EL Baggrundslys

For at oplyse displayet i mørke omgivelser skal du trykke på LYS button. The backlight will remain active for approximately 5 seconds.

4. Funktioner

5. Vedligeholdelse

5.1 Rengøring

Tør stopuret af med en blød, tør klud. Ved genstridigt snavs, tør med en letamp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing eller display.

5.2 Udskiftning af batteri

When the display becomes dim or functions become erratic, it is time to replace the battery. Follow the instructions in Section 2.1. Dispose of used batteries according to local regulations.

5.3 Opbevaring

Store the stopwatch in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. If storing for an extended period, it is advisable to remove the battery to prevent leakage.

6. Fejlfinding

ProblemMulig årsagLøsning
Skærmen er tom eller svag.Lavt eller dødt batteri.Replace the CR-2032 battery (refer to Section 2.1).
Knapperne reagerer ikke.Midlertidig softwarefejl eller lavt batteri.Fjern og sæt batteriet i igen. Hvis problemet fortsætter, skal du udskifte batteriet.
Tid/dato er forkert.Not set correctly or battery was removed.Reset the time and date (refer to Section 3.2).
Stopwatch does not start/stop.Forkert tilstand valgt.Ensure the stopwatch is in stopwatch mode (refer to Section 3.3).

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact CUSTOM customer support.

7. Specifikationer

8. Garanti og support

Specific warranty details and customer support contact information are not provided in the product data. Please refer to the product packaging or the official CUSTOM website for warranty terms and support contacts.

For general inquiries or technical assistance, please visit the manufacturer's webwebstedet eller kontakt din lokale forhandler.

Relaterede dokumenter - SW-709N

Preview CUSTOM CT-5200WP 防水デジタル温度計 取扱説明書
CUSTOM CT-5200WP 熱電対防水型デジタル温度計の取扱説明書です。IP67防水、データロギング、タイマー、アラート機能、各種センサーオプションを備えています。
Preview Brugsanvisning til CUSTOM CT-3100WP vandtæt digitalt termometer
Omfattende brugsanvisning til det vandtætte digitale termometer CUSTOM CT-3100WP, der dækker funktioner, specifikationer, betjening, vedligeholdelse og sikkerhedsforanstaltninger.
Preview Brugsanvisning til CUSTOM CT-3200WP vandtæt digitalt termometer
Comprehensive instruction manual for the CUSTOM CT-3200WP waterproof digital thermometer, detailing features, specifications, operation, safety precautions, and maintenance.
Preview CUSTOM Digital Waterproof Scale CS-WP Series Instruction Manual
Instruction manual for CUSTOM CS-WP series digital waterproof scales, detailing safety precautions, product features, specifications, operation, calibration, and troubleshooting. Includes IP65 compliance information.
Preview CUSTOM Digital Brusebestandig Vægt CS-S/CS-SS Serie Brugermanual
Brugsanvisning til CUSTOM digitale brusesikre vægte, CS-S og CS-SS serien. Dækker sikkerhedsforanstaltninger, funktioner, specifikationer, betjening og fejlfinding for modeller som CS-1000S, CS-2000S, CS-5000S, CS-10KS, CS-20KS, CS-1000SS, CS-2000SS, CS-5000SS, CS-10KSS, CS-20KSS.
Preview Manuel service KUBE II XF - CUSTOM
Acest manual de service oferă instrucțiuni detaliate pentru întreținerea, depanarea și repararea dispozitivului CUSTOM KUBE II XF, acoperind descrierea componentelor, conectări, funcționalitățiți de curriculumares.