Xiaomi Mi Cordless Screwdriver 3.6V User Manual

1. Produktet er slutview

The Xiaomi Mi Cordless Screwdriver 3.6V is a portable and powerful tool designed for various household tasks, including assembling furniture, installing light fixtures, and working with electronics. It features a strong magnetic motor, a high-capacity rechargeable battery, and a set of S2 steel bits.

Figure 1.1: Xiaomi Mi Cordless Screwdriver and its accessories.

Nøglefunktioner:

• Powerful Magnetic Motor: Delivers up to 5 N.m of torque for efficient screwing and unscrewing.
• Trådløs og bærbar: Equipped with a 2000mAh rechargeable battery and USB-C charging for convenience.
• High-Quality Bits: Includes 12 S2 alloy steel bits and a 60mm extension rod for various applications.
• One-piece Body Design: Patented screw-free design for durability and comfortable grip.
• Innovative Dial: Three-shift dial for easy one-handed operation (screw in, screw out, lock).
• Integreret LED belysning: Three LEDs form a circular light strip for illumination in dim environments.

Figure 1.2: The screwdriver, bit set, and carrying case.

2. Opsætning

2.1 Opladning af skruetrækkeren

Before first use, fully charge the screwdriver. The device is equipped with a 2000mAh lithium-ion battery and charges via a USB-C port.

1. Find USB-C-opladningsporten på skruetrækkeren.
2. Connect the provided USB-C charging cable to the screwdriver.
3. Tilslut den anden ende af kablet til en kompatibel USB-strømadapter (medfølger ikke) eller en USB-port.
4. The charging indicator will illuminate. Charging typically takes 120-180 minutes for a full charge.
5. Når det er fuldt opladet, skal du frakoble ladekablet.

Figur 2.1: Intern view fremhæver 2000mAh-batteriet.

2.2 Installation af bits

The screwdriver uses standard 1/4-inch hex shank bits. An extension rod is also included for hard-to-reach areas.

1. Select the appropriate S2 steel bit for your task from the included set.
2. If needed, insert the 60mm extension rod into the screwdriver's magnetic chuck until it clicks into place.
3. Insert the selected bit firmly into the magnetic chuck of the screwdriver or the extension rod. The magnetic chuck will hold the bit securely.
4. To remove a bit, simply pull it straight out.

3. Betjeningsvejledning

3.1 Tænd og sluk

The screwdriver is activated by pressing the main trigger button. There is no separate power on/off switch.

3.2 Using the Direction Dial

The innovative three-shift dial located at the rear of the screwdriver controls the rotation direction and locks the tool.

Figure 3.1: The three-shift dial for operation.

• 'L' Position (Screw Out): Rotate the dial to 'L' to set the screwdriver to rotate counter-clockwise, used for loosening or unscrewing fasteners.
• Center Position (Locking): Rotate the dial to the center position (indicated by a dot) to lock the screwdriver. In this position, the trigger will not activate the motor, allowing for manual tightening or loosening if needed, or for safe storage.
• 'R' Position (Screw In): Rotate the dial to 'R' to set the screwdriver to rotate clockwise, used for tightening or screwing in fasteners.

3.3 Aktivering af LED-lysene

The screwdriver features three integrated LED lights around the chuck to illuminate the work area.

Figure 3.2: The integrated LED lights illuminate the work area.

The LED lights automatically turn on when the trigger button is pressed and the screwdriver is in either the 'L' or 'R' position. They will turn off when the trigger is released.

3.4 Generel drift

1. Ensure the correct bit is installed and the direction dial is set to 'L' for unscrewing or 'R' for screwing.
2. Place the tip of the bit onto the head of the fastener.
3. Press the trigger button to activate the screwdriver. Apply gentle, steady pressure to the tool.
4. Release the trigger button once the fastener is tightened or loosened to the desired extent.

Figure 3.3: Screwdriver in use on a bicycle.

Figure 3.4: Screwdriver in use assembling furniture.

4. Vedligeholdelse

4.1 Rengøring

Regular cleaning helps maintain the performance and longevity of your screwdriver.

• Ensure the screwdriver is turned off (dial in center position) and disconnected from any charging cable before cleaning.
• Wipe the exterior of the screwdriver with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Clean any debris from the magnetic chuck and bit holder.
• Hold ventilationsåbningerne fri for støv og snavs.

4.2 Opbevaring

Store the screwdriver and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures.

• Always store the screwdriver with the direction dial in the center (locked) position to prevent accidental activation.
• Utilize the provided carrying case for organized and protected storage of the screwdriver and bits.
• For long-term storage, ensure the battery is partially charged (around 50%) to preserve battery health. Avoid storing with a completely depleted or fully charged battery for extended periods.

5. Fejlfinding

This section addresses common issues you might encounter with your Xiaomi Mi Cordless Screwdriver.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

6. Specifikationer

The following table provides the technical specifications for the Xiaomi Mi Cordless Screwdriver 3.6V.

Figure 6.1: Basic parameters and packing list.

Pakkeindhold:

• Xiaomi Mi Cordless Screwdriver x 1
• Opbevaringspose x 1
• Brugervejledning x 1
• Bit Box x 1
• Forlængerstang x 1
• Bits x 12
• Ladekabel x 1

7. Garanti og support

For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Xiaomi provides customer support for its products.

For additional support or to explore other Xiaomi products, you may visit the official Xiaomi store:

Besøg XIAOMI-butikken på Amazon

Gem venligst din købsbevis i tilfælde af garantikrav.