Indledning
This manual provides essential instructions for the safe and efficient operation of your Powertech UPS Line Interactive PT-950C. Please read this manual thoroughly before installation and use, and retain it for future reference. The Uninterruptible Power Supply (UPS) is designed to protect your electronic equipment from power outages, surges, and sags, ensuring continuous operation and data integrity.
Vigtige sikkerhedsinstruktioner
- Åbn ikke UPS'en casing. Der er ingen dele indeni, som brugeren kan servicere. Overlad service til kvalificeret servicepersonale.
- Do not install the UPS in direct sunlight, near heat sources, or in environments with excessive dust, moisture, or flammable liquids.
- Sørg for tilstrækkelig ventilation omkring UPS'en. Bloker ikke ventilationsåbningerne.
- Tilslut kun UPS'en til en jordet vekselstrømsstikkontakt.
- Do not connect appliances that could overload the UPS, such as laser printers, heaters, or vacuum cleaners.
- In case of fire, use a dry chemical extinguisher. Water can be dangerous near electrical equipment.
- Disconnect the UPS from the AC power outlet before cleaning. Use a dry cloth.
Produkt overview og komponenter
The Powertech PT-950C UPS features a compact design with multiple Schuko outlets for connecting your devices. Below is an illustration of the unit's main features.
Figur 1: Front view of the Powertech PT-950C UPS, showing four Schuko-type power outlets. The Powertech logo is visible on the lower left, and ventilation grilles are on the right side. A power cord is connected to the right side of the unit.
Nøglekomponenter:
- Schuko Outlets (4x): Provide battery backup and surge protection for connected equipment.
- Power knap: Controls the UPS power on/off status.
- AC Input Cord: Tilslutter UPS'en til stikkontakten.
- LED-indikatorer: (Typically located on the front panel, exact position may vary) Display operational status such as AC mode, battery mode, and fault conditions.
Opsætningsinstruktioner
- Udpakning: Tag forsigtigt UPS'en ud af emballagen. Undersøg den for eventuelle forsendelsesskader.
- Placering: Place the UPS on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat, dust, and moisture. Ensure there is sufficient space around the unit for airflow.
- Indledende opladning: Connect the UPS to a standard grounded AC wall outlet using its integrated power cord. Allow the unit to charge for at least 8 hours before connecting any equipment to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
- Tilslutningsudstyr: After the initial charge, connect your computer, monitor, and other critical electronic devices to the Schuko outlets on the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's capacity (570W).
- Tænd: Press the power button on the UPS to turn it on. The indicator light should illuminate, confirming operation.
Betjening af UPS'en
- Tænd/sluk: Press and hold the power button for approximately 2-3 seconds to turn the UPS on or off.
- AC-tilstand: When connected to a stable AC power source, the UPS operates in AC mode, providing power to connected devices and charging its internal battery. An indicator light (e.g., green LED) typically confirms this status.
- Batteritilstand: Under en magt outage eller betydelig volumentage fluctuation, the UPS automatically switches to battery mode, providing power from its internal battery. An audible alarm may sound, and an indicator light (e.g., flashing green or amber LED) will signal this mode.
- Advarsel om lavt batteri: If the battery level becomes critically low during battery mode, the UPS will emit a more frequent alarm, indicating that connected devices should be safely shut down.
- Advarsel om overbelastning: If the connected load exceeds the UPS's capacity, an alarm will sound, and a fault indicator may illuminate. Disconnect non-essential equipment immediately to prevent damage.
Opretholdelse
- Batteripleje: To maximize battery life, ensure the UPS is always connected to an AC power source. If the UPS is stored for an extended period, recharge it every three months for at least 8 hours.
- Rensning: Disconnect the UPS from the wall outlet and all connected devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
- Udskiftning af batteri: The internal battery is not user-replaceable. Contact qualified service personnel for battery replacement. Improper replacement can lead to hazards.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| UPS'en tænder ikke. | Ingen vekselstrøm; Lavt batteri; UPS-fejl. | Kontroller vekselstrømstilslutningen; Lad UPS'en oplade i 8 timer; Kontakt support, hvis fejlen fortsætter. |
| UPS'en bipper kontinuerligt i AC-tilstand. | Overbelastningstilstand. | Disconnect non-essential equipment until the alarm stops. Ensure total load is within 570W. |
| Kort backuptid. | Batteriet er ikke fuldt opladet; Batteriet er ved at være slut; Overbelastning. | Ensure initial 8-hour charge; Reduce connected load; Consider battery replacement by service personnel. |
| UPS does not provide power to connected devices. | UPS is off; Battery discharged; Fault condition. | Turn on UPS; Allow battery to charge; Check for fault indicators and contact support. |
Specifikationer
- Model: PT-950C
- Kapacitet: 950VA / 570W
- Type: Line Interactive
- Input bindtage: 220-240 VAC
- Udgang Voltage (Battery Mode): 220-240 VAC (simulated sine wave)
- Udsalgssteder: 4 x Schuko (Battery Backup & Surge Protected)
- Overførselstid: Typisk 2-6 ms
- Batteritype: Sealed Lead-Acid, Maintenance-Free (Batteries included)
- Opladningstid: 6-8 timer til 90 % kapacitet
- Beskyttelse: Overload, Discharge, Overcharge, Short Circuit
Garanti og support
The Powertech UPS Line Interactive PT-950C comes with a 24 måneders garanti fra købsdatoen, dækker fabrikationsfejl. Gem venligst din købsbevis i tilfælde af garantikrav.
For technical support, troubleshooting assistance beyond this manual, or warranty service, please contact your retailer or the Powertech customer service department. Refer to the product packaging or Powertech's official webwebsted for kontaktoplysninger.
