Produkt overview
This document provides instructions for the installation, operation, and maintenance of the Harbor Breeze Tilghman II 2-Light Bronze LED Ceiling Fan Light Kit. This kit is designed to integrate with the Tilghman II ceiling fan, offering efficient LED lighting and a decorative bronze finish with a white frosted glass shade. It is suitable for both indoor and damp-rated outdoor locations, such as enclosed porches or patios.
Image: The assembled Harbor Breeze Tilghman II LED Ceiling Fan Light Kit, featuring a bronze-finished base with a textured design, a white frosted glass shade, and a pull chain for operation.
Vigtige sikkerhedsinstruktioner
- Read all instructions thoroughly before beginning installation or operation.
- Always disconnect power at the circuit breaker or fuse box before installing, cleaning, or servicing the light kit to prevent electrical shock.
- All electrical wiring must be performed in accordance with national and local electrical codes. If you are unfamiliar with electrical wiring, consult a qualified, licensed electrician.
- Do not use this light kit with a dimmer switch unless the dimmer is specifically rated for LED lighting and compatible with the kit's specifications.
- This light kit is damp rated, making it suitable for indoor use and covered outdoor areas like enclosed porches or patios. Do not expose to direct water spray.
Pakkens indhold
Before beginning installation, ensure all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- Light Kit Housing (Bronze Finish)
- White Frosted Glass Shade
- (2) 6.5 Watt LED Medium Base Light Bulbs
- Mounting Hardware (e.g., screws, washers, wire nuts)
Opsætning og installation
This light kit is designed for attachment to a compatible Harbor Breeze Tilghman II ceiling fan. Refer to your ceiling fan's instruction manual for specific details on preparing the fan for light kit installation.
- Forberedelse: Ensure the power supply to the ceiling fan is completely disconnected at the main circuit breaker. Verify power is off by attempting to operate the fan or existing light.
- Ledningsforbindelser: Carefully connect the electrical wires from the light kit to the corresponding wires from the ceiling fan. Typically, connect the white wire from the light kit to the white (neutral) wire from the fan, and the black wire from the light kit to the black (hot) wire from the fan. Connect any green or bare copper ground wires together. Secure all connections using the provided wire nuts, ensuring no bare wire is exposed.
- Mounting the Light Kit Housing: Align the light kit housing with the designated mounting points on the bottom of the ceiling fan motor housing. Secure the light kit housing firmly using the screws provided, ensuring a snug fit.
- Installation af pære: Carefully screw the two 6.5-watt LED medium base (E26) bulbs into the sockets within the light kit housing. Do not overtighten the bulbs.
- Skærmtilbehør: Position the white frosted glass shade over the light kit housing. Secure the shade according to the specific mechanism of your Tilghman II fan, typically by twisting or using retaining screws, ensuring it is stable and will not fall.
- Strømgendannelse: Once all connections are secure and the light kit is fully assembled, restore power at the circuit breaker.
Betjeningsvejledning
The Tilghman II LED Light Kit offers straightforward operation:
- Trækkædeoperation: The light kit is equipped with a pull chain. A single pull will turn the light ON, and another pull will turn it OFF.
- Betjening af fjernbetjening (hvis relevant): If your Harbor Breeze Tilghman II ceiling fan is equipped with a remote control that includes light functions, you may also use the remote to control the light kit. Refer to your fan's remote control manual for specific pairing and operation instructions.
The integrated LED technology provides efficient and long-lasting illumination, reducing the need for frequent bulb replacements.
Pleje og vedligeholdelse
Proper care and maintenance will ensure the longevity and appearance of your light kit.
- Rensning: Always ensure power is disconnected before cleaning. To clean the bronze finish, wipe with a soft, slightly damp cloth. Avoid using abrasive cleaners, solvents, or polishes that could damage the finish. For the white frosted glass shade, remove it carefully and wash with mild soap and water, or use a glass cleaner. Dry thoroughly before reattaching.
- Udskiftning af pære: The included LED bulbs are designed for extended life. If replacement becomes necessary, ensure power is off. Use only 6.5-watt LED medium base (E26) bulbs. Using incandescent bulbs or bulbs with higher wattage than specified may damage the light kit or pose a fire hazard.
Fejlfinding
If you experience issues with your light kit, consult the following table for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | No power to the fan/light kit | Check the circuit breaker for the fan's circuit. Ensure any wall switches controlling the fan or light are in the ON position. |
| Lyset tænder ikke | Løse ledningsforbindelser | Turn off power at the circuit breaker. Carefully check all wire connections within the light kit and fan housing to ensure they are secure. |
| Lyset tænder ikke | Bulbs not seated correctly or faulty | Turn off power at the circuit breaker. Gently re-seat the LED bulbs. If the problem persists, test with new, known-good 6.5-watt LED E26 bulbs. |
| Lyse flimrer | Løs pære eller ledningsforbindelse | Turn off power at the circuit breaker. Check that bulbs are screwed in tightly. Verify all electrical connections are secure. |
Produktspecifikationer
| Mærke | HAVNEBRIS |
| Model | Tilghman II |
| Lyskildetype | LED |
| Antal lyskilder | 2 |
| Wattage | 13 watts (total for 2 bulbs) |
| Lysstyrke | 900 lumen |
| Pære base | E26 (Mellem base) |
| Slutte | Bronze |
| Skærmmateriale | Glass (White Frosted) |
| Indendørs/Udendørs brug | Indendørs, Udendørs (Damp Bedømt) |
| Varens vægt | 4.88 pund |
| Pakkedimensioner | 15.2 x 12.32 x 7.56 tommer |
| UPC | 080629264403 |
Garantioplysninger
Specific warranty details for the Harbor Breeze Tilghman II LED Ceiling Fan Light Kit are typically provided within the product packaging or can be obtained directly from the manufacturer, HARBOR BREEZE. Please retain your proof of purchase, such as a receipt, for any potential warranty claims.
Kundesupport
For technical assistance, inquiries regarding missing parts, or any other support needs, please contact HARBOR BREEZE customer service. Refer to the contact information provided in your product packaging or visit the official HARBOR BREEZE webwebsted for de mest aktuelle supportmuligheder.
