1. Introduktion
This user manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell Power X-Change TE-SM 36/210 Li Cordless Miter Saw. As part of the Power X-Change series, this saw offers unparalleled flexibility and freedom from cords, making it ideal for various woodworking tasks, including miter and cross cuts, and even cutting parquet flooring to length.
Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.
Figure 1: The Einhell TE-SM 36/210 Li Cordless Miter Saw, a versatile tool for precise cuts.
2. Sikkerhedsinstruktioner
Prioritér altid sikkerheden, når du bruger elværktøj. Manglende overholdelse af disse instruktioner kan resultere i alvorlig personskade eller beskadigelse af værktøjet.
- Brug personlige værnemidler (PPE): Brug altid sikkerhedsbriller, høreværn og støvmaske.
- Sikkert arbejdsemne: Brug clamping device to firmly hold the workpiece in place before cutting.
- Oprethold et rent arbejdsområde: Hold arbejdsområdet frit for rod og godt oplyst.
- Tjekblad: Ensure the saw blade is sharp, clean, and correctly installed before each use.
- Undgå at overrække: Oprethold korrekt fodfæste og balance til enhver tid.
- Afbryd strømmen: Fjern altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
- Støvhåndtering: Utilize the dust bag or connect to a dust extractor to minimize airborne dust.
3. Opsætning
3.1 Batteriinstallation
The TE-SM 36/210 Li operates on the Einhell Power X-Change system, requiring two 18V batteries (36V total) for optimal performance. It is recommended to use at least two 2.5 Ah PXC Plus rechargeable batteries.
- Sørg for, at saven er slukket.
- Align the battery packs with the battery slots on the saw.
- Slide the battery packs into the slots until they click securely into place.
- To remove, press the release button on each battery and slide them out.
Figure 2: Proper installation of the Power X-Change batteries into the saw.
3.2 X-Tend Table Extension
The saw features X-Tend supports that can be adjusted with one hand and without tools, providing stable support for wider workpieces.
- Locate the X-Tend supports on either side of the main table.
- Pull the supports outwards to extend them to the desired length.
- Ensure the workpiece is fully supported across the extended table for stability and accurate cuts.
Figure 3: Extending the X-Tend table for supporting longer workpieces.
3.3 Støvopsamling
The saw comes with a sawdust bag and an adapter for connecting an external dust extractor, helping to keep your workspace clean.
- Attach the provided sawdust bag to the dust port at the rear of the saw.
- For more efficient dust extraction, connect a compatible dust extractor hose to the adapter.
4. Betjeningsvejledning
4.1 Tænd/sluk
To start the saw, press the main power switch. Release the switch to turn off the saw.
4.2 Using LED Light and Laser Line
The integrated LED light and laser line ensure precise cuts, even in challenging lighting conditions.
- Locate the LED and Laser switches on the saw's handle.
- Press the respective buttons to activate the LED light for illumination and the laser line for guiding your cut.
Figure 4: The laser line provides a clear guide for accurate cutting.
4.3 Adjusting Angle Cuts (Miter)
The turntable allows for precise angle adjustments for miter cuts, ranging from -47° to +47°.
- Loosen the locking mechanism for the turntable.
- Rotate the turntable to the desired angle, indicated by the scale.
- Securely tighten the locking mechanism before making a cut.
Figure 5: The turntable allows for precise angle adjustments for miter cuts.
4.4 Adjusting Bevel Cuts
The saw head can be tilted up to 45° to the left for bevel cuts.
- Løsn knappen til justering af skråningen.
- Vip savhovedet til den ønskede vinkel.
- Tighten the knob to lock the head in position.
4.5 Sliding Function
The smooth-running drag function is suitable for wider workpieces, allowing the saw head to slide forward and backward during the cut.
- Sørg for, at arbejdsemnet er sikkert klampudg.
- Lower the saw blade slightly into the workpiece.
- Push the saw head forward through the material, then pull it back to complete the cut.
4.6 Skærekapacitet
The cutting capacity varies based on the battery capacity and the material being cut. The Power X-Change system allows for different battery sizes to be used, affecting the number of cuts per charge.
Figure 6: Approximate cutting capacity for laminated wood (195 x 8 mm) per battery charge.
Figure 7: Approximate cutting capacity for square wood (60 x 60 mm) per battery charge.
For optimal results, it is recommended to use higher capacity Power X-Change batteries.
4.7 Produktvideo
Watch the official product video for a visual guide on the features and operation of the Einhell TE-SM 36/210 Li Cordless Miter Saw.
Video: Demonstrating the features and use of the Einhell TE-SM 36/210 Li Miter Saw, including battery installation, X-Tend table, laser guide, and various cuts.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din geringsavs lange levetid og optimale ydeevne.
- Rensning: After each use, clean the saw thoroughly, especially around the blade area and dust port, to prevent sawdust buildup. Use a brush or compressed air.
- Udskiftning af knive: Replace worn or damaged saw blades promptly. Always use a blade compatible with the saw's specifications and intended material. Refer to the blade replacement instructions in the full manual for detailed steps.
- Smøring: Periodically lubricate moving parts as recommended in the comprehensive manual to ensure smooth operation of the sliding mechanism and angle adjustments.
- Opbevaring: Opbevar saven på et tørt og sikkert sted, utilgængeligt for børn.
6. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på med din geringssav.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Saven starter ikke. | Batterierne er ikke installeret korrekt eller afladede. | Sørg for, at batterierne er fuldt opladet og korrekt isat. |
| Cuts are not straight or precise. | Dull blade, incorrect angle setting, or workpiece not secure. | Replace blade, re-check angle settings, and ensure workpiece is clampred fast. |
| For meget støv under drift. | Dust bag full or not properly attached; dust extractor not connected or clogged. | Empty dust bag, check connections, or clear any blockages in the dust extraction system. |
| Saw motor overheats. | Overloading the saw, continuous heavy use. | Allow the saw to cool down. Avoid forcing the blade through material. |
If you encounter issues not listed here, please refer to the complete product manual or contact Einhell customer support.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | TE-SM 36/210 Li (4300880) |
| Voltage | 36 Volts (2x 18V Power X-Change) |
| Magt | 144 watt |
| Hastighed | 1900 rpm |
| Bladlængde | 30 centimeter |
| Produktmål (L x B x H) | 78.2 x 53 x 49 cm |
| Vægt | 12.57 kilo |
| Særlige funktioner | Brushless motor, LED light, Laser line, X-Tend table supports |
| Komponenter inkluderet | Cordless sliding miter saw, precision carbide-tipped saw blade |
| Batterier påkrævet | Yes (2x 18V Power X-Change, not included for main power; 2x LR44 for laser/LED) |
| Bladmateriale | Carbid |
| Anbefalet overflade | Træ |
8. Garanti og support
For warranty information, please refer to the documentation provided with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly.
Spare parts availability: Information unavailable.
Du kan finde mere information og kontaktoplysninger på den officielle Einhell-side. webwebsted: www.einhell.com
