Huskie Tools REC-B6510 12 Ton kompressionsværktøjssæt brugermanual

1. Produktet er slutview

The Huskie Tools REC-B6510 is a 12-ton battery-operated compression tool designed for crimping electrical connectors. It is engineered for single-handed operation, making it suitable for overhead applications and situations where one hand is needed to manage the work piece. This tool eliminates the need for external hoses and heavy equipment, offering enhanced portability and ease of use.

Nøglefunktioner omfatter:

• Betjening med én hånd: Facilitates use in challenging environments.
• Tested Up to 75kV: Ensures safety in high-voltage applikationer.
• Rotational Head: Provides flexibility for various crimping angles.
• Rapid Advance System: Reduces crimp cycle time, increasing-effektivitet.
• Ergonomically Balanced: Designed for user comfort and reduced fatigue.
• Wide Jaw Opening: 1.65" opening accommodates mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al.
• Die Compatibility: Accepts all standard "U" type dies.
• Automatisk bypass: A built-in 10,000 psi bypass cartridge audibly signals when optimal pressure is reached.

2. Vigtige sikkerhedsoplysninger

Læs og forstå alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and protective clothing.
• Sørg for, at arbejdsområdet er rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
• Undgå utilsigtet start. Sørg for, at kontakten er i slukket position, før du tilslutter batteriet, løfter eller bærer værktøjet.
• Gå ikke for langt. Hold altid ordentligt fodfæste og balance. Dette giver bedre kontrol over elværktøjet i uventede situationer.
• Frakobl batteripakken fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Brug elværktøjet, tilbehøret og værktøjsbits osv. i overensstemmelse med denne vejledning, under hensyntagen til arbejdsforholdene og det arbejde, der skal udføres.
• Vedligehold elværktøj og tilbehør. Kontroller for fejljustering eller fastklæbning af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke elværktøjets funktion.
• Only use battery packs and chargers specified by the manufacturer.

3. Produktkomponenter

Familiarize yourself with the main parts of your REC-B6510 compression tool:

Figure 1: Huskie Tools REC-B6510 12 Ton Compression Tool. This image displays the complete tool, featuring its blue and black housing, the crimping head, trigger, and battery compartment.

• Crimping Head: The front part of the tool where dies are inserted and the crimping action occurs. It features a rotational design for versatility.
• Die Retainer Pin: Secures the crimping dies in place.
• Udløserkontakt: Activates the hydraulic pump for crimping.
• Returknap: Releases hydraulic pressure to retract the ram and open the dies.
• Handle/Grip: Ergonomisk designet til komfortabel og sikker håndtering.
• Batterirum: Located at the base of the handle, houses the Lithium-Ion battery.
• Batteri pakke: Provides power to the tool. (Not visible in main image, but implied)
• Oplader: Used to recharge the battery pack. (Not visible in main image, but implied)

4. Opsætning og klargøring

4.1 Opladning af batteriet

1. Ensure the battery charger is connected to a suitable power outlet.
2. Insert the battery pack into the charger. The charger's indicator light will show the charging status.
3. Allow the battery to fully charge before first use. Refer to the charger's manual for specific charging times and indicators.
4. Når batteriet er opladet, skal det tages ud af opladeren.

4.2 Installation af batteriet

1. Ensure the tool's trigger is not engaged.
2. Align the charged battery pack with the battery compartment at the base of the tool's handle.
3. Skub batteripakken fast på plads, indtil den klikker, hvilket indikerer, at den er forsvarligt låst.
4. For at fjerne batteriet skal du trykke på batteriets udløserknap (hvis den er monteret) og skubbe batteriet ud.

4.3 Installing Dies

1. Sørg for, at værktøjet er slukket, og at batteriet er fjernet af sikkerhedsmæssige årsager.
2. Retract the ram fully by pressing the return button.
3. Open the die retainer pin or mechanism on the crimping head.
4. Insert the appropriate "U" type dies for the specific connector and cable size you are working with.
5. Close and secure the die retainer pin. Ensure dies are properly seated and aligned.

5. Betjeningsvejledning

5.1 Kontrol før brug

• Verify the correct dies are installed for the application.
• Sørg for, at batteriet er fuldt opladet og sikkert installeret.
• Inspect the tool for any visible damage or loose parts.
• Confirm the work piece (cable and connector) is clean and prepared according to manufacturer specifications.

5.2 Performing a Crimp

1. Open the crimping head by pressing the return button until the dies are fully retracted.
2. Position the cable and connector within the open dies. Ensure the connector is properly seated and aligned for the crimp.
3. If necessary, rotate the crimping head to achieve the optimal working angle.
4. Press and hold the trigger switch. The dies will advance rapidly until they contact the connector, then slow down as crimping pressure builds.
5. Continue holding the trigger until the tool's internal bypass system audibly "bypasses" (a distinct click or hiss), indicating that optimal crimping pressure has been reached.
6. Slip udløserkontakten.
7. Press the return button to retract the ram and open the dies.
8. Remove the crimped connector and inspect the crimp for quality and completeness.

5.3 Single-Handed Operation

The REC-B6510 is designed for single-handed use. This allows the operator to hold the tool with one hand while the other hand is free to position the cable or connector, particularly useful in overhead or confined spaces. Ensure a firm grip and stable footing when operating with one hand.

6. Vedligeholdelse og pleje

6.1 Generel rengøring

• After each use, wipe down the tool with a clean, dry cloth to remove dirt, dust, and debris.
• Pay special attention to the crimping head and die areas to prevent accumulation that could affect performance.
• Do not use harsh chemicals or solvents that could damage the tool's housing or internal components.

6.2 Batteripleje og -opbevaring

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Opbevar ikke batterier i afladet tilstand i længere perioder. Genoplad dem med jævne mellemrum, hvis de ikke er i brug.
• Avoid dropping or physically damaging battery packs.
• If a battery pack becomes hot during use or charging, discontinue use and allow it to cool before handling.

6.3 Die Maintenance

• Keep dies clean and free of debris.
• Inspect dies regularly for wear, cracks, or damage. Replace worn or damaged dies immediately to ensure proper crimps.
• Lightly lubricate dies with a suitable non-conductive lubricant if recommended by the manufacturer.

6.4 Professionel service

For internal repairs or hydraulic system maintenance, contact authorized Huskie Tools service centers. Attempting to service the tool yourself may void the warranty and could lead to injury or damage to the tool.

7. Fejlfinding

This section addresses common issues you might encounter with your REC-B6510 tool. For problems not listed here, contact Huskie Tools customer support.

8. Tekniske specifikationer

9. Garanti og support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Huskie Tools webwebsted. Gem din købsbevis til garantikrav.

For technical support, service, or to order replacement parts, please contact Huskie Tools customer service:

• Webwebsted: Visit the Huskie Tools Store on Amazon (for generel mærkeinformation)
• Refer to your product packaging or included documentation for direct contact information.