DEX DX-182 Laser Barcode Reader User Manual

1. Introduktion

This manual provides essential instructions for the proper setup, operation, and maintenance of your DEX DX-182 Laser Barcode Reader. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

Pakkeindhold:

1x DEX DX-182 Laser Barcode Reader
1 x USB-kabel
1x Brugermanual (dette dokument)

2. Produktet er slutview

The DEX DX-182 is a high-performance laser barcode scanner designed for efficient data capture. It features a visible laser light source and USB connectivity for easy integration with various systems.

Figur 1: Forside view of the DEX DX-182 Laser Barcode Reader.

This image displays the front of the barcode reader, highlighting its ergonomic design, the scanning window, and the brand logo. The device is black with a yellow trigger button.

Tilbage view of the DEX DX-182 Laser Barcode Reader, showing the contoured grip. — Figur 2: Tilbage view of the DEX DX-182 Laser Barcode Reader.

Side view of the DEX DX-182 Laser Barcode Reader, highlighting the yellow trigger button. — Figur 3: Side view of the DEX DX-182 Laser Barcode Reader.

3. Opsætning

Follow these steps to set up your DEX DX-182 Laser Barcode Reader:

Pak enheden ud: Carefully remove the barcode reader and USB cable from its packaging.
Tilslut USB-kablet: Insert the smaller end of the USB cable into the port located at the base of the barcode reader.
Opret forbindelse til værtsenhed: Plug the larger end of the USB cable into an available USB port on your computer or POS system.
Driverinstallation (automatisk): The operating system should automatically detect and install the necessary drivers. Wait for the "Device is ready" notification.
Test scanneren: Open a text editor (e.g., Notepad, Word) or any application that accepts keyboard input. Point the scanner at a barcode and press the trigger. The barcode data should appear in the open application.

4. Betjeningsvejledning

The DEX DX-182 Laser Barcode Reader is designed for simple and efficient operation.

Scanning a Barcode:

Sigte: Hold the scanner with the scanning window facing the barcode. Ensure the laser beam covers the entire barcode.
Udløser: Press and hold the yellow trigger button. A red laser line will emit from the scanning window.
Scan: Position the scanner at an appropriate distance (typically 2-9 cm) from the barcode. The scanner will emit a beep and the laser will turn off upon a successful read.
Dataoutput: The scanned data will be transmitted to your connected computer or POS system as if it were typed via a keyboard.

Supported Barcode Types:

The scanner supports a wide range of 1D barcode symbologies, including but not limited to:

EAN (europæisk artikelnummer)
UPC (Universal Product Code)
Code 2 of 5 (Interleaved 2 of 5, Industrial 2 of 5)
Kode 39
Kode 93
Kode 128
Codabar
MSI/Plessey
GS1 DataBar (RSS)

5. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your barcode reader.

Rengøring af scanningsvinduet: Regularly clean the scanning window with a soft, lint-free cloth. If necessary, use a mild, non-abrasive cleaning solution applied to the cloth (not directly to the device).
Undgå barske kemikalier: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the device's casing or scanning window.
Kabelpleje: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Opbevaring: Når scanneren ikke er i brug, skal den opbevares et rent og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
Drop beskyttelse: While designed for durability, avoid dropping the device. Excessive impact can damage internal components.

6. Fejlfinding

If you encounter issues with your DEX DX-182, refer to the following troubleshooting guide:

Problem	Mulig årsag	Løsning
Scanneren tænder ikke.	USB-kablet er ikke korrekt tilsluttet, eller USB-porten er defekt.	Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer.
Scanneren læser ikke stregkoder.	Stregkoden er beskadiget eller dårligt udskrevet. Scanningsvinduet er snavset. Incorrect scanning distance. Unsupported barcode type.	Prøv at scanne en anden, kendt gyldig stregkode. Rengør scanningsvinduet som beskrevet i afsnittet Vedligeholdelse. Adjust the distance between the scanner and the barcode (optimal 2-9 cm). Verify the barcode type is listed in the "Supported Barcode Types" section.
Scanned data does not appear on screen.	No active input field. Problem med driveren.	Ensure a text editor or application with an active input field is open and focused. Disconnect and reconnect the USB cable. Restart your computer if necessary.

7. Specifikationer

Feature	Detalje
Model	DX-182
Mærke	DEX
Forbindelse	USB kabel
Lyskilde	Visible Laser 650 nm
Scanningshastighed	100 scanninger/sekund
Minimum printkontrast	35 %
Dybdeskarphed	2-9 cm (for 0.1mm bar width)
Resolution (Min. Bar Width)	0.1 mm
Understøttede stregkoder	EAN, UPC, Code 2 of 5, Code 39, Code 93, Code 128, Codabar, MSI/Plessey, GS1 DataBar, and others.
Produktdimensioner	167 x 97 x 65 mm (Device)
Produktets vægt	480 g

8. Garanti og support

Garantioplysninger: Specific warranty details are typically provided at the point of purchase or within separate warranty documentation. Please refer to your purchase receipt or contact your retailer for warranty terms and conditions.

Teknisk support: For technical assistance, troubleshooting beyond this manual, or inquiries regarding your DEX DX-182 Laser Barcode Reader, please contact DEX customer support or your authorized dealer. Contact information can usually be found on the manufacturer's webwebsted eller produktemballage.

	DEX FingerLight Ring Sizing Guide A comprehensive guide to sizing your DEX FingerLight, detailing how to adjust the ring for the perfect fit using its Griptonite Overmolded Copper Ring technology.
	DEX FingerLight datablad - USB-C genopladelig LED-lampe Omfattende datablad for DEX FingerLight, en kompakt og kraftfuld USB-C genopladelig LED-lampe designet til håndfri belysning. Funktionerne omfatter Griptonite-ring, IPX7-vandtæthed og flere lystilstande.
	KEYENCE DX Series Håndholdt Terminal Instruktionsmanual Brugsanvisning til KEYENCE DX-serien af håndholdte terminaler, der dækker sikkerhedsforanstaltninger, regler, installation, specifikationer og håndtering af modellerne DX-A600, DX-A600GE, DX-A400, DX-A400GE og DX-W600.
	KEYENCE DX-seriens håndholdte terminal instruktionsmanual - Sikkerhed, specifikationer og brugervejledning Omfattende brugsanvisning til KEYENCE DX-serien af håndholdte terminaler (DX-A600, DX-A600GE, DX-A400, DX-A400GE, DX-W600 modeller). Dækker sikkerhedsforanstaltninger, overholdelse af lovgivningen (FCC, ISED, CE, UKCA, UL), installation af enheden, rengøring, specifikationer og garantioplysninger.
	Widex MOMENT™ høreapparatbrugervejledning og -vejledning Omfattende brugervejledning til Widex MOMENT™ MBR3D høreapparatet. Lær om funktioner, betjening, tilpasning, tilslutningsmuligheder og sikkerhed. Indeholder instruktioner til MOMENT-appen og Bluetooth-parring.
	Brugsanvisning til Keyence DX-seriens håndholdte terminal Denne instruktionsmanual indeholder vigtige sikkerhedsforanstaltninger, driftsretningslinjer og tekniske specifikationer for Keyence DX-serien af håndholdte terminaler, inklusive modellerne DX-A600, DX-A600GE, DX-A400, DX-A400GE og DX-W600. Den dækker emner som LED- og lasersikkerhed, overholdelse af regler (FCC, CE, UKCA, ISED), installation af microSD- og SIM-kort, håndtering, rengøring og specifikationer.

DEX DX-182