Indledning
This manual provides essential information for the setup, operation, and maintenance of your Numark Scratch 2-channel DJ Mixer and the included SoundSwitch DMX Micro Interface. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your experience.
Pakkens indhold
- Numark Scratch DJ Mixer
- SoundSwitch DMX Micro Interface
- USB kabel
- Strømadapter
- Software Download Cards (Serato DJ Pro, SoundSwitch)
- Brugervejledning (dette dokument)
- Sikkerheds- og garantimanual
Image: The Numark Scratch DJ Mixer shown alongside the SoundSwitch DMX Micro Interface and a DMX cable, representing the complete package contents.
Opsætning
Follow these steps to set up your Numark Scratch mixer and SoundSwitch DMX Micro Interface.
- Strømtilslutning: Connect the included power adapter to the Numark Scratch mixer and then to a power outlet.
- USB Connection (Mixer): Connect the Numark Scratch mixer to your computer using a USB cable. This connection enables control of Serato DJ Pro and audio routing.
- Lydindgange: Connect your turntables or media players to the LINE/PHONO inputs on the rear panel. Ensure the PHONO/LINE switch for each channel is set correctly according to your source.
- Lydudgange: Connect the MASTER output (XLR or RCA) to your sound system. Connect the BOOTH output (RCA) to your booth monitors if applicable.
- Mikrofonindgang: If using a microphone, connect it to the MIC input on the front panel.
- Hovedtelefoner: Connect your headphones to the 1/4" or 1/8" headphone jacks on the front panel.
- SoundSwitch DMX Micro Interface Connection: Connect the SoundSwitch DMX Micro Interface to an available USB port on your computer.
- DMX-belysningstilslutning: Connect a standard DMX cable from the SoundSwitch DMX Micro Interface to your DMX-compatible lighting fixtures.
- Software installation: Install Serato DJ Pro and SoundSwitch software on your computer. Follow the instructions provided with your software download cards.
Billede: En vinklet view of the Numark Scratch DJ Mixer, illustrating its overall design and various connection points on the rear and top panels.
Betjeningsvejledning
Numark Scratch Mixer Controls
Billede: En detaljeret nærbillede view of the Numark Scratch mixer's top panel, highlighting the various knobs, faders, performance pads, and effect controls.
- Gain-knapper: Juster indgangsniveauet for hver kanal.
- EQ Knobs (Treble, Mid, Bass): Control the high, mid, and low frequencies for each channel.
- Filter Knobs: Apply high-pass or low-pass filters to each channel.
- Kanalfadere: Control the volume of each channel.
- InnoFader Crossfader: The central fader for blending between channels. Features reverse and slope controls for customization.
- Omvendt kontakt: Flips the crossfader's left/right assignment.
- Hældningskontrol: Adjusts the crossfader's curve from a smooth blend to a sharp cut.
- FX Select Buttons: Choose from 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser).
- Paddle Launch Triggers: Activate and hold selected effects.
- Dry/Wet FX Control: Adjust the intensity of the applied effect.
- Loop Knobs: Create instant loops of various lengths.
- Ydelsespuder: Access cue points, rolls, and samples within Serato DJ Pro. Use the Pad -tilstand button to cycle through different functions.
- Hovedvolumen: Controls the overall output level to your main sound system.
- Standvolumen: Controls the output level to your booth monitors.
- Headphone Cue/Mix: Adjusts the balance between the cued channel and the master output in your headphones.
- Hovedtelefonforstærkning: Adjusts the overall volume of your headphones.
SoundSwitch DMX Micro Interface Operation
The SoundSwitch DMX Micro Interface integrates with Serato DJ Pro to synchronize lighting effects with your music.
Image: The Numark Scratch mixer displayed with 'SoundSwitch Ready' text, emphasizing its compatibility and seamless integration with the SoundSwitch lighting software.
- Softwareintegration: Once connected and SoundSwitch software is running, the interface will automatically detect and control your DMX lighting fixtures.
- Automatiseret belysning: SoundSwitch can analyze your music and generate automated lighting scenes.
- Custom Lighting Displays: Use the SoundSwitch software to design and program custom lighting sequences that respond to your DJ performance.
- Blå LED-indikator: The blue LED on the interface indicates a successful connection and data transmission.
Opretholdelse
Korrekt vedligeholdelse sikrer dit udstyrs levetid og optimale ydeevne.
- Rensning: Use a soft, dry cloth to clean the exterior of the mixer and interface. Avoid abrasive cleaners or solvents.
- Støvbeskyttelse: Keep the unit covered when not in use to prevent dust accumulation.
- Kabelstyring: Sørg for, at alle kabler er pænt organiseret og ikke er under belastning for at forhindre skader.
- Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Crossfader Maintenance: The InnoFader is designed for durability. If cleaning is required, consult a qualified technician or refer to specific InnoFader maintenance guidelines.
Fejlfinding
Hvis du støder på problemer, kan du bruge følgende almindelige løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Incorrect cable connections, volume levels too low, incorrect input selection. | Verify all audio cables are securely connected. Check Master, Booth, and Channel volume knobs. Ensure PHONO/LINE switches are set correctly. Check audio settings in Serato DJ Pro. |
| Serato DJ Pro genkender ikke mixeren | USB cable issue, driver not installed, software not updated. | Try a different USB port or cable. Ensure Serato DJ Pro is updated to the latest version. Reinstall drivers if necessary. |
| SoundSwitch lighting not working | DMX cable issue, interface not connected, software not running, lighting fixtures not powered. | Check DMX cable connections. Ensure SoundSwitch DMX Micro Interface is connected to USB and its blue LED is active. Verify SoundSwitch software is running and configured correctly. Ensure lighting fixtures are powered on and in DMX mode. |
| Crossfader not responding correctly | Crossfader reverse or slope settings, physical obstruction. | Check the crossfader reverse and slope switches. Ensure no debris is obstructing the fader. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Numark |
| Model | Kradse |
| Antal kanaler | 2 |
| crossfader | InnoFader with reverse and slope control |
| Effekter | 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser) |
| Forbindelsesteknologi | USB |
| Hardware-interface | USB |
| Udgangsstiktype | USB Type B, XLR, RCA |
| Strømkilde | Elektrisk med ledning |
| Inkluderet software | Serato DJ Pro (with DVS License), SoundSwitch |
Garantioplysninger
Numark products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the separate Warranty and Safety Manual included with your product or visit the official Numark webwebsted.
Vigtig: Keep your proof of purchase. It will be required for any warranty service.
Støtte
For technical support, product registration, or to download the latest software and drivers, please visit the official Numark support webwebsted:
You can also find frequently asked questions (FAQs) and community forums on the support page.
