TC Electronic Flashback 2 X4 DELAY Pedal Brugermanual

Indledning

This manual provides comprehensive instructions for the TC Electronic Flashback 2 X4 DELAY pedal. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. The Flashback 2 X4 DELAY is a versatile delay pedal featuring multiple delay types, MASH footswitches, and looper functionality.

Nøglefunktioner omfatter:

• Legendary delay pedal with 3 pressure-sensitive footswitches.
• New algorithms including Crystal, Analog, and Tape.
• Access up to 6 stored delay presets.
• 10 quality delay types plus 6 TonePrint slots.

Produkt overview

The TC Electronic Flashback 2 X4 DELAY pedal offers a wide range of delay effects and looping capabilities. Familiarize yourself with the pedal's layout and connections before use.

Figur 1: Top view of the TC Electronic Flashback 2 X4 DELAY pedal, showing all knobs, footswitches, and indicators.

Figur 2: Rear panel of the Flashback 2 X4 DELAY, displaying input/output jacks, expression pedal input, power input, MIDI connections, and bypass switches.

Opsætning

1. Strømtilslutning

• Connect a 9V DC power supply (minimum 300mA, center negative) to the 9VDC input jack on the rear panel.
• Sørg for, at strømforsyningen opfylder den specificerede voltage og gældende krav for at forhindre skader.

2. Lydforbindelser

• Mono-opsætning: Connect your instrument to the MONO INPUT jack. Connect the MONO OUTPUT jack to your amplifier or next pedal in the signal chain.
• Stereo opsætning: Connect your instrument (or preceding stereo pedal) to both MONO and STEREO INPUT jacks. Connect the MONO and STEREO OUTPUT jacks to your stereo amplifier setup or other stereo effects.

3. Expression Pedal (Optional)

• Connect an expression pedal to the EXP PEDAL input for real-time control over various delay parameters.

4. MIDI-forbindelser (valgfrit)

• Use the MIDI IN and THRU ports to integrate the Flashback 2 X4 into a MIDI-controlled setup for preset changes and parameter control.

5. Bypass Mode Selection

• On the rear panel, locate the BYPASS switch.
• Ægte bypass: Provides a completely unaltered signal when the pedal is disengaged.
• Bufret bypass: Maintains signal integrity over long cable runs and provides spillover for delay trails when disengaged.

6. Kill Dry Function

• The KILL DRY switch on the rear panel removes the dry signal from the output. This is useful when using the pedal in a parallel effects loop or with a mixer that provides its own dry signal.

Betjeningsvejledning

1. Kontroller overview

• TYPE-vælger: Rotary switch to select delay algorithms (Loop, Reverse, LoFi, Ping Pong, Tape, Crystal, Dynamic, 2290, 2290 Mod, Analog).
• SUBDIV Knob: Controls the rhythmic subdivision of the delay repeats.
• DELAY-knap: Justerer forsinkelsestiden.
• FEEDBACK-knap: Styrer antallet af forsinkelsesgentagelser.
• LEVEL knap: Adjusts the overall output level of the delayed signal.
• BANK 1/2 / STORE Switch: Toggles between two banks of presets (Bank 1 and Bank 2). Press and hold to store a preset.

2. Fodpedalfunktioner

• Footswitches A, B, C: Engage/disengage individual delay presets. These are also MASH footswitches.
• MASH Functionality: Pressing and holding footswitches A, B, or C with varying pressure allows for expressive real-time control over specific delay parameters, depending on the selected TonePrint.
• TAP fodkontakt: Tap this footswitch two or more times to set the delay tempo.

3. Looper Operation

When the TYPE selector is set to "Loop":

• REC (Footswitch A): Press to start recording a loop. The REC LED will illuminate. Press again to stop recording and start playback.
• PLAY/PAUSE (Footswitch B): Press to play or pause the current loop.
• ONCE (Footswitch C): Plays the loop once and then stops.
• UNDO/REDDO (TAP Footswitch): Press to undo the last overdub. Press and hold to redo.

4. TonePrint Integration

The Flashback 2 X4 supports TC Electronic's TonePrint technology. This allows you to upload custom-tuned effects from your smartphone or computer.

• Download the free TonePrint App for iOS/Android or the TonePrint Editor for Mac/PC.
• Connect your pedal via USB to your computer or use the "Beam" function with your smartphone.
• Load artist TonePrints or create your own custom delay sounds.
• The pedal has 6 dedicated TonePrint slots for storing your favorite custom effects.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre pedalens yderside. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the pedal in a dry environment, away from extreme temperatures and humidity. Disconnect power when not in use for extended periods.
• Kabelstyring: Sørg for, at alle kabler er i god stand og korrekt tilsluttet for at forhindre signaltab eller beskadigelse.

Fejlfinding

• Ingen strøm:
  • Verify the power supply is correctly connected and meets the 9V DC, 300mA (center negative) specification.
  • Tjek stikkontakten.
• Ingen lyd:
  • Ensure all audio cables are securely connected to the correct input/output jacks.
  • Check the volume/level settings on your instrument, amplifier, and the pedal itself.
  • Test med forskellige kabler for at udelukke defekte forbindelser.
• Unexpected Delay Behavior:
  • Check the selected delay TYPE and knob settings (SUBDIV, DELAY, FEEDBACK, LEVEL).
  • If using TonePrint, ensure the correct TonePrint is loaded and configured as desired.
  • For MASH functionality, ensure you are applying appropriate pressure and that the TonePrint supports the desired parameter control.
• Looper-problemer:
  • Ensure the TYPE selector is set to "Loop".
  • Follow the recording and playback steps carefully.

Specifikationer

Garanti og support

For warranty information, technical support, and additional resources, please visit the official TC Electronic webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Du kan finde mere information og support på TC Electronic Store on Amazon.