Vigtige sikkerhedsoplysninger
Before operating your Hover-1 Switch, please read all instructions thoroughly. Failure to follow these instructions may result in serious injury, property damage, and void your warranty. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when riding.
- Brug altid hjelm og passende sikkerhedsudstyr (knæbeskyttere, albuebeskyttere) når du kører.
- Sørg for, at enheden er fuldt opladet før hver brug.
- Rid ikke under påvirkning af stoffer eller alkohol.
- Avoid riding on uneven surfaces, steep inclines, or in wet conditions.
- Always adhere to local traffic laws and regulations.
- Supervise children operating the device.
Image: Always wear a helmet and safety gear when operating the Hover-1 Switch.
Produkt overview
The Hover-1 Switch is an innovative 2-in-1 electric device that transforms between a scooter and a skateboard. It is designed for recreational use, offering a unique and versatile riding experience. The device features a powerful 90W brushless motor, an electronic throttle and brake, and a durable construction for reliable performance.
Image: The Hover-1 Switch in its scooter configuration, ready for use.
Opsætning og montering
Indledende opladning
Before first use, fully charge the Hover-1 Switch. The 25.2V Lithium-ion battery requires approximately 2.5 hours for a full charge.
- Find opladningsporten på enheden.
- Connect the charger to the device, then plug the charger into a standard wall outlet.
- The charging indicator light will change to show charging status (refer to charger manual for specific light indications).
- Når den er fuldt opladet, skal du frakoble opladeren.
Converting Between Scooter and Skateboard Mode
The Hover-1 Switch features an easy lock and release mechanism for tool-free conversion.
- To convert from Scooter to Skateboard: Locate the lock and release mechanism near the base of the handlebar. Disengage the lock and carefully detach the handlebar and the front LED wheel assembly. Attach the included front skateboard wheels to the designated slots on the board. Ensure all components are securely fastened.
- To convert from Skateboard to Scooter: Remove the front skateboard wheels. Reattach the handlebar and front LED wheel assembly, ensuring the lock mechanism is fully engaged and secure.
Image: The "Switch" mechanism allows for easy conversion between scooter and skateboard modes without tools.
Betjeningsvejledning
Kontrolelementer
- Power knap: Located on the device, press to turn on/off.
- Elektronisk gashåndtag: Used to accelerate. Gently press to increase speed.
- Elektronisk bremse: Used to slow down or stop. Apply gently for smooth braking.
- Remote Control (Skateboard Mode): The skateboard mode is controlled via a remote. Refer to the remote's specific instructions for pairing and operation.
Batteriindikator
Monitor the battery level using the integrated indicator to ensure you have sufficient charge for your ride.
Image: The battery indicator helps you track the remaining charge.
Speed and Range
The Hover-1 Switch can reach different maximum speeds depending on the mode and rider weight. The maximum speed for the skateboard is 7 mph, and for the scooter, it is 9 mph. A full charge can provide a range of up to 2.5 miles.
Image: The Hover-1 Switch offers a maximum speed of 7 mph in skateboard mode and 9 mph in scooter mode.
Opretholdelse
Batteripleje
- Oplad batteriet helt efter hver brug.
- If storing for an extended period, charge the battery to 50% every 3 months to maintain battery health.
- Udsæt ikke batteriet for ekstreme temperaturer.
Rengøring og opbevaring
- Tør enheden af med annonceamp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Store the Hover-1 Switch in a cool, dry place away from direct sunlight and moisture.
Fejlfinding
Specifikationer
Image: The Hover-1 Switch is powered by a 90W brushless motor for efficient performance.
Garantioplysninger
The Hover-1 Switch comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Kundesupport
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hover-1 customer support. Refer to the official Hover-1 webhjemmeside for de mest opdaterede kontaktoplysninger.
For yderligere ressourcer og produktinformation kan du besøge Hover-1 Brand Store on Amazon.
