Cecotec Conga Serie 4090 Robotstøvsuger Brugermanual

Indledning

The Cecotec Conga Serie 4090 is an advanced robot vacuum cleaner designed to provide comprehensive floor cleaning. Equipped with 4-in-1 technology, it can sweep, vacuum, mop, and scrub simultaneously. Its iTech Laser 360 navigation system ensures efficient mapping and optimal cleaning routes. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

Sikkerhedsinstruktioner

Please read these safety instructions carefully before using the appliance and keep them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Sørg for, at strømmen voltage matcher voltage indicated on the appliance's rating label.
• Nedsænk ikke apparatet, netledningen eller stikket i vand eller anden væske.
• Hold robotten væk fra børn og kæledyr under drift.
• Brug ikke robotten på våde overflader eller i områder med stillestående vand.
• Avoid operating the robot near open flames or heat sources.
• Kontrollér regelmæssigt netledningen for skader. Hvis den er beskadiget, skal den udskiftes af producenten eller en kvalificeret servicetekniker.
• Unplug the robot from the power outlet before cleaning or performing any maintenance.
• Brug ikke robotten til at opsamle stort affald, skarpe genstande eller væsker.
• Sørg for, at alle kabler, gardiner og skrøbelige genstande er fjernet fra rengøringsstien for at forhindre sammenfiltring eller beskadigelse.

Produkt overview

Familiarize yourself with the main components of your Conga Serie 4090 robot vacuum cleaner.

Figur 1: Top view of the Cecotec Conga Serie 4090 robot vacuum cleaner, showing the main unit, a roller brush, a remote control, and a smartphone displaying the companion app. This image illustrates the primary components included with the device, highlighting its smart features and accessories.

Hovedkomponenter:

• Robot Main Unit: Contains the motor, dustbin, water tank, sensors, and control buttons.
• Opladningsbase: Til automatisk genopladning af robotten.
• Strømadapter: Tilslutter opladningsbasen til en stikkontakt.
• Sidebørster: Two brushes that sweep debris into the main brush path.
• Hovedbørste: Central brush for deep cleaning.
• Skraldespand: Opsamler tørt snavs.
• Mixed Tank (Water Tank & Dustbin): For combined vacuuming and mopping.
• Moppeklude: Attachable cloths for wet cleaning.
• High-Efficiency Filter (HEPA): Filters fine dust particles.
• Fjernbetjening: For manual control and setting cleaning modes.
• Rengøringsværktøj: For maintaining the brushes and filters.

Opsætning

1. Charging the Robot:

1. Placer opladningsbasen op ad en væg i et åbent område, og sørg for, at der ikke er forhindringer inden for 1 meter til siderne og 2 meter foran.
2. Tilslut strømadapteren til opladeren, og sæt den i en stikkontakt.
3. Place the robot on the charging base, ensuring the charging contacts align. The robot will emit a sound and the indicator light will show charging status.
4. Lad robotten oplade helt før første brug (ca. 3-4 timer).

2. Appinstallation og forbindelse:

The Conga 4090 can be controlled via the Cecotec app, compatible with 5GHz Wi-Fi networks.

1. Download the "Cecotec Conga" app from your smartphone's app store (Google Play Store or Apple App Store).
2. Registrer en konto og log ind.
3. Sørg for, at din smartphone er forbundet til et 5 GHz Wi-Fi-netværk.
4. Follow the in-app instructions to add your Conga 4090 robot. This typically involves pressing and holding a button on the robot to enter pairing mode.
5. Når du er tilsluttet, vil appen guide dig gennem den indledende kortlægningsproces.

Figur 2: A user interacting with the Cecotec Conga app on a smartphone, demonstrating the ease of controlling and managing the robot vacuum's functions and cleaning plans from a mobile device.

3. Initial Mapping (iTech Laser 360):

The robot uses iTech Laser 360 navigation to create an accurate map of your home.

1. For the first cleaning cycle, allow the robot to clean your entire home without interruption. This helps it create a complete and accurate map.
2. Ensure all doors are open to areas you wish to be mapped.
3. Once the map is created, you can view and edit it in the app using the Room Plan feature.

Figur 3: A smartphone display illustrating the Room Plan feature within the Cecotec Conga app. The screen shows a mapped floor plan with glowing, editable sections, demonstrating the robot's ability to memorize and allow management of multiple maps and customized cleaning plans.

Drift

Rengøringsmåder:

The Conga 4090 offers 10 intelligent cleaning modes and 3 electronic mopping modes.

Figur 4: A visual representation of the ten distinct cleaning modes available on the Cecotec Conga 4090. These icons depict various cleaning patterns and functionalities, including Auto, Edges, Spiral, Manual, Return to Home, Twice, Scrubbing, Spot, Restricted Area, and Smart Area, showcasing the robot's versatile cleaning capabilities.

• Auto: Standard cleaning mode for general daily cleaning.
• Kanter: Rengør langs vægge og møbelkanter.
• Spiralformet: Renser et koncentreret område i et spiralmønster.
• Manual: Control the robot's movement using the app or remote control.
• Tilbage til hjemmet: Robotten vender tilbage til ladestationen.
• To gange: Cleans the area twice for thorough cleaning.
• Skrubning: Specific mopping mode for deeper wet cleaning.
• Sted: Cleans a specific dirty spot.
• Begrænset område: Define areas the robot should avoid in the app.
• Smart område: Define specific areas for targeted cleaning.

Brug af 4-i-1-funktionen:

The Conga 4090 can sweep, vacuum, mop, and scrub simultaneously thanks to its mixed tank.

1. Vacuuming/Sweeping: Ensure the dustbin or mixed tank is properly installed. The robot will automatically sweep and vacuum.
2. Mopping/Scrubbing: Fill the mixed tank with clean water (and a small amount of neutral floor cleaner if desired). Attach the mopping cloth. Select a mopping mode via the app or remote control. The electronic control allows for precise water flow.

Figur 5: The Cecotec Conga robot vacuum cleaner operating under furniture, demonstrating its iTech Laser 360 navigation system. The blue grid lines illustrate the robot's precise mapping and obstacle avoidance capabilities as it cleans.

Voice Assistant-integration:

Control your Conga 4090 using voice commands with Alexa and Google Assistant.

• Enable the "Cecotec Conga" skill/action in your Alexa or Google Home app.
• Link your Cecotec account.
• Use commands such as "Alexa, tell Conga to start cleaning" or "Hey Google, ask Conga to go home."

Opretholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din robotstøvsuger.

1. Emptying and Cleaning the Dustbin:

• Tryk på udløserknappen til skraldespanden, og fjern skraldespanden.
• Åbn låget til skraldespanden, og tøm indholdet i en skraldespand.
• Clean the dustbin with a dry cloth. The dustbin can be rinsed with water, but ensure it is completely dry before re-installing.

2. Cleaning the High-Efficiency Filter (HEPA):

• Fjern HEPA-filteret fra støvbeholderen.
• Bank forsigtigt på filteret for at fjerne støv. Vask ikke HEPA-filteret med vand.
• Udskift HEPA-filteret hver 3.-6. måned, afhængigt af brugen.

3. Cleaning the Main Brush and Side Brushes:

• Fjern hovedbørstedækslet, og løft hovedbørsten ud.
• Brug det medfølgende rengøringsværktøj til at fjerne hår og snavs, der har viklet sig ind omkring børsten.
• Pull off the side brushes and remove any hair or debris. Reattach them securely.

4. Cleaning the Mixed Tank and Mopping Cloth:

• Empty any remaining water from the mixed tank.
• Rinse the tank with clean water and allow it to air dry completely.
• Remove the mopping cloth and wash it by hand or machine. Allow it to air dry.

5. Cleaning Sensors and Charging Contacts:

• Wipe the cliff sensors (located on the bottom of the robot) and the charging contacts (on the robot and charging base) with a clean, dry cloth.
• Ensure the laser sensor on top of the robot is free from dust.

Fejlfinding

If you encounter issues with your Conga Serie 4090, refer to the following common problems and solutions:

Specifikationer

Technical specifications for the Cecotec Conga Serie 4090 Robot Vacuum Cleaner.

Garanti og support

Your Cecotec Conga Serie 4090 robot vacuum cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in the product packaging for specific terms and conditions.

For teknisk support, reservedele eller garantikrav, kontakt venligst Cecotec kundeservice via deres officielle webwebstedet eller kontaktoplysningerne i din produktdokumentation.

Bemærk: Gem din købskvittering som købsbevis af garantiårsager.