Produkt overview
The HyperX FURY DDR4 memory module is designed to provide a performance boost for your desktop system. It features an updated low-profile heat spreader and is available in various speeds and capacities. This module is XMP-ready and offers Plug N Play automatic overclocking for ease of use. It is compatible with the latest Intel and AMD CPUs.
Figur 1: Vinklet view of the HyperX FURY DDR4 memory module, showcasing its black heat spreader and HyperX logo.
Nøglefunktioner
- Updated low-profile heat spreader design for improved thermal performance and aesthetics.
- Cost-efficient, high-performance DDR4 upgrade for desktop systems.
- Intel XMP-ready profiles optimized for Intel’s latest chipsets, allowing for easy overclocking.
- Available in fast speeds up to 3466MHz, providing enhanced system responsiveness.
- Plug N Play functionality at 2400MHz and 2666MHz for automatic overclocking without manual BIOS adjustments.
Opsætning og installation
Installing the HyperX FURY DDR4 memory module requires careful handling and adherence to safety precautions. Always ensure your system is powered off and unplugged before beginning installation.
Tjekliste før installation:
- Ensure your motherboard supports DDR4 memory and the specific speed (e.g., 3200MHz) of your HyperX FURY module. Refer to your motherboard's manual for compatibility.
- Gather necessary tools: a Phillips head screwdriver and an anti-static wrist strap (recommended).
- Work in a clean, well-lit area to prevent static discharge and accidental damage.
Installationstrin:
- Sluk og tag stikket ud: Sluk computeren helt, og tag strømkablet ud af stikkontakten.
- Åben sag: Fjern sidepanelet på computerens kabinet for at få adgang til bundkortet.
- Find DIMM-pladser: Identify the DDR4 DIMM slots on your motherboard. These are typically long slots near the CPU. Consult your motherboard manual for the correct slot configuration for single or multiple modules.
- Prepare Slots: Gently push down the small clips at each end of the DIMM slot to open them.
- Indsæt hukommelsesmodul: Align the notch on the HyperX FURY DDR4 module with the key in the DIMM slot. Apply even pressure to both ends of the module until it clicks into place and the clips snap shut. Do not force the module.
- Bekræft installationen: Ensure both clips are fully closed and the module is seated firmly and evenly in the slot.
- Luk kassen og tænd: Replace the side panel of your computer case, reconnect the power cable, and power on your system.
Figure 2: HyperX FURY DDR4 module correctly installed in a motherboard, highlighting its compatibility with Intel XMP.
Figure 3: HyperX FURY DDR4 module installed in a system, demonstrating compatibility with AMD platforms.
Betjeningsvejledning
Once installed, the HyperX FURY DDR4 memory module operates automatically. However, to achieve optimal performance, especially the advertised speeds, you may need to configure your system's BIOS/UEFI settings.
Automatic Overclocking (Plug N Play):
The HyperX FURY DDR4 features Plug N Play functionality at 2400MHz and 2666MHz. In most compatible systems, the memory will automatically run at these speeds without any manual configuration in the BIOS. This provides an immediate performance boost upon installation.
Enabling XMP Profiles:
For speeds higher than 2666MHz (e.g., 3200MHz or 3466MHz), you will need to enable the Intel XMP (Extreme Memory Profile) in your motherboard's BIOS/UEFI settings. This allows the memory to run at its factory-tested optimal speed and latency settings.
- Adgang til BIOS/UEFI: Restart your computer and repeatedly press the designated key (commonly Del, F2, F10, eller F12) during startup to enter the BIOS/UEFI setup.
- Locate Memory Settings: Navigate to the memory or overclocking section. The exact location varies by motherboard manufacturer (e.g., "AI Tweaker," "OC," "Advanced Memory Settings").
- Enable XMP: Look for an option like "XMP," "DOCP" (for AMD), or "Extreme Memory Profile." Select the appropriate XMP profile (usually Profile 1) that corresponds to the advertised speed of your HyperX FURY module.
- Gem og luk: Save the changes and exit the BIOS/UEFI. Your system will restart with the new memory settings applied.
Note: HyperX PnP memory will run in most DDR4 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. AMD Ryzen systems will boot at the JEDEC default speed/latency with FURY. In order to enable the factory overclock speed and latency, Profile 1 must be selected in the BIOS.
Opretholdelse
HyperX FURY DDR4 memory modules are designed for long-term reliability and require minimal maintenance. However, following these guidelines can help ensure optimal performance and longevity:
- Hold systemet rent: Regularly clean the interior of your computer case to prevent dust buildup on components, including the memory modules and their heat spreaders. Dust can impede heat dissipation.
- Sørg for korrekt luftstrøm: Verify that your computer case has adequate airflow to keep all components, especially memory, within optimal operating temperatures.
- Avoid Physical Contact: Once installed, avoid touching the memory modules directly, especially the gold contacts. If handling is necessary, do so by the edges and use anti-static precautions.
- BIOS-opdateringer: Keep your motherboard's BIOS/UEFI firmware updated. Manufacturer updates often include improved memory compatibility and stability.
Fejlfinding
If you encounter issues after installing your HyperX FURY DDR4 memory module, consider the following troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| System does not boot or displays a black screen. | Memory module not seated correctly. Incompatible memory. |
|
| System boots but memory is not recognized at advertised speed (e.g., 3200MHz). | XMP profile not enabled in BIOS. Motherboard BIOS is outdated. |
|
| System instability, crashes, or Blue Screen of Death (BSOD). | Memory instability (often due to incorrect settings or faulty module). |
|
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | HX432C16FB3/8 |
| Hukommelsestype | DDR4 SDRAM |
| Kapacitet | 8 GB (Single Stick) |
| Hukommelseshastighed | 3200 MHz (PC4-25600) |
| Latency | CL16 |
| Voltage | 1.2 volt |
| Formfaktor | DIMM (Desktop Memory) |
| Rang | 1Rx8 |
| Farve | Sort |
| Dimensioner (LxBxH) | 5.25 x 0.28 x 1.34 tommer |
| Vægt | 1.41 ounce |
| Funktioner | XMP-Ready, Plug N Play (2400MHz & 2666MHz) |
Garantioplysninger
The HyperX FURY DDR4 memory module is backed by a livstidsgaranti. This provides a worry-free, cost-effective upgrade solution. For detailed terms and conditions of the warranty, please refer to the official HyperX website or contact HyperX customer support.
Støtte
For further assistance, technical support, or to access additional resources, please visit the official HyperX support webwebsted:
You can also find frequently asked questions (FAQs) and driver downloads (if applicable) on their support portal.
