ELAC Carina FS247.4-SB Gulvhøjttaler Brugermanual

1. Introduktion

This manual provides essential information for the setup, operation, and maintenance of your ELAC Carina FS247.4-SB Floorstanding Speaker. The Carina series combines elegant design with advanced audio technology, featuring ELAC's JET tweeter and a specially developed compound curvature woofer for a wide dynamic range and minimal distortion. Please read this manual thoroughly before using your speaker to ensure optimal performance and safety.

2. Sikkerhedsoplysninger

Always observe the following safety precautions to prevent damage to the speaker or injury to yourself.

• Placering: Place the speaker on a stable, level surface to prevent tipping. Keep away from direct sunlight, heat sources, and moisture.
• Ventilation: Sørg for tilstrækkelig ventilation omkring højttaleren. Bloker ikke ventilationsåbninger.
• Forbindelser: Before making any connections, ensure all audio equipment is turned off and unplugged from the power outlet.
• Magt: This is a passive speaker and requires an external amplifier. Do not connect directly to a wall outlet.
• Rensning: Brug en blød, tør klud til rengøring. Brug ikke flydende rengøringsmidler eller aerosoler.
• Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• ELAC Carina FS247.4-SB Floorstanding Speaker (1 unit)
• Binding post straps (pre-installed or included for single-wire connection)
• Udriggerfødder
• Pigge
• Discs (for use with spikes on delicate floors)
• Brugervejledning (dette dokument)

Billede: Forside view of the ELAC Carina FS247.4-SB Floorstanding Speaker, showcasing its sleek satin black finish and driver configuration.

4. Opsætning

4.1 Attaching the Outrigger Feet and Spikes

The outrigger feet provide stability and improve sound performance by decoupling the speaker from the floor.

1. Carefully lay the speaker on its side on a soft, non-abrasive surface to avoid scratching the cabinet.
2. Attach the four outrigger feet to the bottom of the speaker using the provided screws. Ensure they are securely fastened.
3. Thread the spikes into the outrigger feet. If placing the speaker on a hard surface (wood, tile), place the protective discs under each spike to prevent damage to the floor. For carpeted surfaces, the spikes can penetrate the carpet for direct contact with the subfloor.
4. Carefully stand the speaker upright. Adjust the height of each spike by rotating it until the speaker is level and stable. Use a spirit level for precision.

Billede: Vinklet view of the ELAC Carina FS247.4-SB speaker, showing the outrigger feet and spikes providing stability.

4.2 Højttalerplacering

Korrekt højttalerplacering er afgørende for optimal lydkvalitet.

• Stereo opsætning: For a traditional stereo setup, place the speakers equidistant from your primary listening position, forming an equilateral triangle.
• Afstand fra vægge: Experiment with placing the speakers away from walls (especially corners) to reduce bass boom and improve imaging. A good starting point is 1-3 feet from the rear wall and side walls.
• Toe-in: Slightly angle the speakers inward towards the listening position (toe-in) to fine-tune the soundstage og fokus.

Image: An ELAC Carina speaker positioned in a room, demonstrating typical placement for home audio.

4.3 Tilslutning til en Amplivligere

The Carina FS247.4-SB features high-quality binding posts for secure connection to your amplivligere.

1. Sørg for din ampApparatet er slukket og taget ud af stikkontakten.
2. Identify the positive (+) and negative (-) terminals on both your speaker and amplifier. The speaker terminals are typically color-coded (red for positive, black for negative).
3. If using a single speaker cable per speaker, ensure the binding post straps are in place, connecting the upper and lower terminals.
4. Tilslut den positive (+) terminal på højttaleren til den positive (+) terminal på den tilsvarende amplifier kanal.
5. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding amplifier kanal.
6. Sørg for, at alle forbindelser er tætte og sikre for at forhindre signaltab eller kortslutninger.

Billede: Detaljeret view of the rear panel of the ELAC Carina FS247.4-SB speaker, showing the dual binding posts for amplifier tilslutning.

5. Betjening

Once properly set up and connected, operating your ELAC Carina FS247.4-SB speakers is straightforward.

• Tænd: Tænd for din amplifier and any source components (e.g., CD player, streamer).
• Lydstyrkekontrol: Start med amplifier volume at its lowest setting and gradually increase it to a comfortable listening level.
• Indbrudsperiode: Like all high-fidelity speakers, the Carina FS247.4-SB will benefit from a break-in period. Allow approximately 50-100 hours of normal listening before the drivers reach their optimal performance. During this time, the sound may evolve and improve.
• Lytteniveauer: Avoid excessively high volume levels that cause distortion, as this can damage the speakers and your hearing.

6. Vedligeholdelse

To keep your ELAC Carina FS247.4-SB speakers in excellent condition, follow these simple maintenance guidelines:

• Rengøring af kabinettet: Use a soft, dry, lint-free cloth to wipe down the speaker cabinet. For stubborn marks, a slightly damp cloth can be used, but ensure no moisture enters the drivers or ports. Avoid abrasive cleaners, solvents, or polishes.
• Cleaning the Drivers: Do not touch the speaker drivers (tweeter and woofers) directly. Dust can be gently removed with a soft brush or compressed air from a distance.
• Gitre: If your speakers come with removable grilles, they can be gently cleaned with a soft brush or vacuum cleaner on a low setting.
• Miljø: Keep the speakers in a stable environment, away from extreme temperatures, humidity, and direct sunlight, which can cause fading or material degradation over time.

7. Fejlfinding

If you experience issues with your ELAC Carina FS247.4-SB speakers, consult the table below for common problems and solutions.

If the problem persists after trying these solutions, please contact ELAC customer support or your authorized dealer.

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

The ELAC Carina FS247.4-SB Floorstanding Speaker comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official ELAC website for detailed terms and conditions regarding coverage, duration, and claims procedures. Keep your proof of purchase for warranty validation.

9.2 Kundesupport

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact ELAC customer support.

• ELAC Webwebsted: www.elac.com
• Kontaktoplysninger: Refer to the "Contact Us" section on the ELAC website for phone numbers, email addresses, or support forms specific to your region.
• Autoriserede forhandlere: For local support, you may also contact the authorized ELAC dealer from whom you purchased the product.