Technaxx Mini Nature Wild Cam TX-117 User Manual

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your Technaxx Mini Nature Wild Cam TX-117. Designed for both indoor and outdoor use, this camera is ideal for observing wildlife, monitoring property, and enhancing home security. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

Pakkens indhold

Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede og i god stand:

• Technaxx Mini Nature Wild Cam TX-117
• Mini USB-kabel
• Monteringsbælte
• 4x AA batterier
• Brugervejledning (dette dokument)

Figure 1: Contents of the Technaxx Mini Nature Wild Cam TX-117 package.

Produkt overview

The Technaxx Mini Nature Wild Cam TX-117 is a compact and robust wildlife camera. It features a 1.9-inch TFT LCD display for easy navigation and preview, a 12MP camera for high-resolution photos, and Full HD 1080P video recording. Equipped with a PIR sensor and IR LEDs, it offers motion-activated recording and night vision capabilities. The IP56 waterproof rating ensures durability in various outdoor conditions.

Figur 2: Forside og side view of the Technaxx Mini Nature Wild Cam TX-117.

Figur 3: Detaljeret front view of the camera, showing the LCD display and control interface.

Figur 4: Nederst view of the camera, illustrating the external power input (6V/1.5A) and Mini USB port.

Opsætning

1. Batteriinstallation

The camera requires 4x AA batteries for operation. These are included in the package. Ensure correct polarity when inserting the batteries.

1. Open the two side clips on the camera to access the interior compartment.
2. Locate the battery slots.
3. Insert the 4x AA batteries according to the polarity markings (+/-) inside the compartment.
4. Close the compartment securely with the side clips.

2. Installation af microSD-kort

A MicroSD card (up to 32GB, not included) is required to store photos and videos.

1. With the camera compartment open, locate the MicroSD card slot.
2. Insert the MicroSD card into the slot until it clicks into place. Ensure the card is oriented correctly as indicated by the diagram near the slot.
3. Close the camera compartment.

3. Montering af kameraet

The included mounting belt allows for flexible placement of the camera.

1. Thread the mounting belt through the two loops on the back of the camera.
2. Secure the camera to a tree or post using the belt. Ensure the camera is stable and facing the desired area. The long strap provides ample length for various tree sizes.
3. Adjust the camera's angle to capture the intended field of view. The front-facing LCD screen can assist in aiming the camera.

Figure 5: Camera mounted on a tree, ready for operation.

Betjeningsvejledning

1. Powering On/Off and Test Mode

The camera has a three-position switch located inside the compartment:

• OFF: Powers down the camera.
• PRØVE: Activates the LCD screen and allows access to the menu settings. Use this mode for setup and configuration.
• PÅ: Activates the camera for recording. The LCD screen will turn off after a few seconds, and the camera will begin motion-activated recording.

2. Menu navigation

In TEST mode, use the control buttons (MENU, UP, DOWN, LEFT, RIGHT, OK, PLAYBACK) to navigate the settings.

Figure 6: Camera LCD display showing a captured image.

Nøgleindstillinger inkluderer:

• Mode: Select between Photo, Video, or Photo & Video.
• Billedopløsning: Choose from 12MP, 8MP, 5MP, 3MP, 2MP, or 1MP.
• Fotoserie: Set to capture 1, 2, or 3 photos per trigger.
• Videoopløsning: Select from 1920x1080P, 1280x720P, 720x480P, 640x480P, or 320x240P.
• TL Video Resolution: Time-Lapse video resolution options (e.g., 3072x1728P, 2304x1296P).
• Videolængde: Set video clip duration from 3 seconds up to 10 minutes.
• Lydoptagelse: Enable or disable audio capture with video.
• Shot Lag: Adjust the delay between consecutive captures (e.g., 5 seconds to 60 minutes).
• IR afstand: Set the infrared sensor distance to Near, Middle, or Far.
• Sensitivity Motion Sensor: Adjust motion sensor sensitivity to Low, Middle, or High.
• Target Recording Time: Enable or disable scheduled recording times.
• Timelapse: Choose Normal, TL Video, or Off. TL Video records photos and compiles them into a video.
• Sprog: Vælg displaysproget.
• Uendelig optagelse: Turn On or Off. When On, the camera will overwrite the oldest filenår MicroSD-kortet er fuldt.
• Tid og dato: Indstil det aktuelle klokkeslæt og dato.
• Foto St.amp: Enable or disable date/time stamp på fotos.
• Adgangskodebeskyttelse: Indstil en adgangskode til enhedens adgang.
• Bip lyd: Enable or disable menu navigation sounds.
• Formater hukommelseskort: Slet alle data på MicroSD-kortet.
• Serienummer: View the device's serial number.
• Nulstil indstillinger: Gendan alle indstillinger til fabriksindstillingerne.
• Version: View firmwareversionen.

Opretholdelse

• Rensning: Brug en blød, tør klud til at rengøre kameralinsen og huset. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace all 4x AA batteries simultaneously when the battery indicator shows low power. Do not mix old and new batteries.
• MicroSD-kort: Regularly back up data from the MicroSD card and format it periodically to maintain optimal performance.
• Opbevaring: Når kameraet ikke er i brug i længere perioder, skal det fjernes fra batterierne og opbevares et køligt og tørt sted.

Fejlfinding

• Kameraet tænder ikke: Kontroller batteriinstallationen, og sørg for, at batterierne er opladet.
• No photos/videos recorded: Verify MicroSD card is inserted correctly, formatted, and has sufficient space. Check motion sensor sensitivity and shot lag settings.
• Dårlig billed-/videokvalitet: Ensure the lens is clean. Adjust resolution settings. Consider lighting conditions.
• Motion sensor not triggering: Adjust sensitivity settings. Ensure no obstructions are blocking the sensor.
• Red hue in footage: This can sometimes occur due to specific lighting conditions or reflections. Ensure the camera is not pointed directly at strong light sources or reflective surfaces.

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the original product packaging or visit the official Technaxx webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.