1. Introduktion
The Klipsch Synergy Black Label Sub-100 is a high-performance 10-inch front-firing subwoofer designed to deliver powerful and accurate bass for your home theater system. Featuring 150 watts of continuous power (300 watts dynamic power) and an all-digital amplifier, this subwoofer ensures efficient and true-to-source sound reproduction. Its robust construction and versatile connectivity make it an ideal addition to enhance your audio experience.
Figur 1.1: Forside view of the Klipsch Synergy Black Label Sub-100 Subwoofer, showcasing its 10-inch spun copper Cerametallic woofer.
2. Vigtige sikkerhedsinstruktioner
Please read all instructions carefully before operating your Klipsch Sub-100 subwoofer. Retain these instructions for future reference. Adhere to all warnings on the product and in the operating instructions.
- Vand og fugt: Brug ikke dette apparat i nærheden af vand eller i ekstremt fugtige omgivelser.
- Varme: Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbninger.
- Strømledningsbeskyttelse: Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
- Rensning: Rengør kun med en tør klud.
- Service: Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
3. Pakkens indhold
Verify that all items are present in the packaging before proceeding with setup:
- 1 x Klipsch Sub-100 Subwoofer
- 1 x strømkabel
- 1 x Brugermanual (dette dokument)
Note: Connection wires are not included and must be purchased separately.
4. Opsætning
4.1 Placering
The placement of your subwoofer significantly impacts its performance. For optimal bass response, it is recommended to place the subwoofer in a corner of the room. This utilizes the room's acoustics to reinforce bass output. Experiment with different positions to find the best sound for your listening environment.
Figure 4.1: The front-firing design allows for flexible placement while delivering deep bass.
4.2 Forbindelser
The Klipsch Sub-100 must be connected to an AV receiver, processor, or pre-amplifier. Use the LFE (Low-Frequency Effects) or Line In connections on the back panel of the subwoofer.
- Sluk: Ensure your AV receiver and the subwoofer are powered off before making any connections.
- Tilslut til modtager: Connect an RCA cable (not included) from the LFE output or Subwoofer Pre-Out on your AV receiver to the LFE/LINE IN input on the Klipsch Sub-100. If your receiver has separate Left and Right pre-outs for the subwoofer, use both L and R inputs on the subwoofer.
- Strømtilslutning: Connect the supplied power cord to the subwoofer's power input and then to a suitable wall outlet.
Figur 4.2: Bagside view of the Klipsch Sub-100, showing the all-digital amplifier and control panel.
Figur 4.3: Detaljeret view of the Line In / LFE input, compatible with almost any receiver.
5. Betjeningsvejledning
Once connected, you can power on your subwoofer and adjust its settings for optimal performance.
5.1 Tænd/sluk
The Sub-100 features an auto-on/off function. When the power switch is set to 'ON AUTO', the subwoofer will automatically power on when an audio signal is detected and enter standby mode after a period of inactivity. You can also manually switch it 'OFF'.
5.2 Styringer
The back panel of the subwoofer provides controls for fine-tuning its output:
- GAIN (Volume): Justerer subwooferens samlede udgangsniveau. Start med en lav indstilling og øg gradvist, indtil bassen blandes problemfrit med dine hovedhøjttalere.
- LOW-PASS (Crossover): This control sets the upper frequency limit for the subwoofer. Frequencies above this setting will not be reproduced by the subwoofer. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80Hz. If using the LFE input from an AV receiver, this control is typically bypassed as the receiver manages the crossover.
- FASE (0°/180°): This switch helps to acoustically match the subwoofer's output with your main speakers. If the bass sounds weak or hollow, try flipping the phase switch. The correct setting will result in the most impactful and coherent bass.
6. Vedligeholdelse
The Klipsch Sub-100 is designed for durability and requires minimal maintenance.
- Rensning: Use a dry, soft cloth to clean the cabinet. Avoid using abrasive cleaners, solvents, or harsh chemicals.
- Gitter: The subwoofer features a strong, flexible, and removable grille. If cleaning the woofer cone is necessary, gently remove the grille. Ensure the grille is securely reattached after cleaning.
- Placering: Undgå at placere subwooferen i direkte sollys eller i nærheden af kilder med overdreven varme eller fugt.
Figure 6.1: The spun copper injection molded graphite woofers are designed for durability and minimal distortion.
7. Fejlfinding
If you encounter issues with your Klipsch Sub-100, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra subwooferen | Power cord not connected; Subwoofer not powered on; Input cable loose or faulty; Receiver settings incorrect; Gain too low. | Check power connections; Ensure power switch is ON AUTO or ON; Re-seat or replace input cable; Verify subwoofer output is enabled on receiver; Increase GAIN control. |
| Distorted or muddy bass | Gain too high; Improper crossover setting; Poor placement; Phase mismatch. | Reduce GAIN; Adjust LOW-PASS frequency; Experiment with subwoofer placement; Toggle PHASE switch (0°/180°). |
| Subwooferen brummer | Ground loop; Faulty cable. | Try plugging the subwoofer into a different electrical outlet; Use a ground loop isolator; Replace input cable. |
| Subwooferen tænder ikke automatisk | No audio signal; Low input signal. | Ensure audio is playing; Increase volume on receiver; Check if the power switch is set to 'ON AUTO'. |
8. Specifikationer
Detailed technical specifications for the Klipsch Synergy Black Label Sub-100 Subwoofer:
| Feature | Specifikation |
|---|---|
| Modelnavn | SUB-100 |
| Højttaler type | Subwoofer |
| Monteringstype | Floor Standing |
| Bashøjttaler diameter | 10 tommer |
| Højttaler Maksimal udgangseffekt | 300 Watts (Dynamic), 150 Watts (Continuous) |
| Frekvensrespons | 20 KHz (Upper limit, adjustable via low-pass filter) |
| Forbindelsesteknologi | Wired (RCA Line In/LFE) |
| Produktmål (D x B x H) | 15.7 cm x 12.5 cm x 14 cm |
| Varens vægt | 25.5 pund |
| Farve | Sort |
| Strømkilde | Elektrisk med ledning |
| Inkluderede komponenter | Subwoofer, Power Cord, Manual |
9. Garanti og support
9.1 Garantioplysninger
The Klipsch Synergy Black Label Sub-100 comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Klipsch webwebstedet for detaljerede vilkår og betingelser vedrørende dækning og varighed.
9.2 Kundesupport
For further assistance, technical support, or warranty claims, please contact Klipsch customer service or visit their official webwebsted:
Klipsch Official Store: Visit the Klipsch Store on Amazon
Please have your product model number (Sub-100) and purchase information ready when contacting support.
