ELECOM P-TIPS03 Stylus Pen Udskiftningsspidser Brugermanual

1. Introduktion

This manual provides essential instructions for the proper use and maintenance of your ELECOM P-TIPS03 Stylus Pen Replacement Tips. These tips are designed to replace worn-out tips on compatible ELECOM 2-way stylus pens and AL.STYLUS series pens, ensuring continued smooth operation and responsiveness.

2. Produktet er slutview

The ELECOM P-TIPS03 replacement tips are crafted with conductive fiber, providing a smooth and responsive experience for touch screen devices. Each package contains two replacement tips, allowing for convenient replacement when needed.

Billede: Nærbillede view of the ELECOM P-TIPS03 conductive fiber replacement tips, highlighting their woven texture.

Image: The ELECOM P-TIPS03 product packaging, illustrating the two replacement tips and indicating compatible stylus models.

3. Kompatibilitet

These replacement tips are specifically designed for the conductive fiber side of the following ELECOM stylus pen series:

• 2-Way Stylus Pens: P-TP2WY01 series (e.g., P-TP2WY01BK, P-TP2WY01WH), PCTP2WY01 series (e.g., PCTP2WY01GY, PCTP2WY01GD), PWTP2WY01BK.
• AL.STYLUS Series: P-TPATCF01 series (e.g., P-TPATPCF01GY), PCTPATCF01 series.

Ensure your stylus model is listed above for proper fit and function.

Image: Visual representation of compatible ELECOM 2-Way type stylus pens and AL.STYLUS pens, indicating the models for which these tips are suitable.

4. Installationsvejledning

Følg disse trin for at udskifte pennens spids:

1. Gently twist the existing, worn-out tip counter-clockwise to remove it from the stylus pen body.
2. Align the new ELECOM P-TIPS03 replacement tip with the pen body.
3. Carefully twist the new tip clockwise onto the pen body until it is securely fastened. Do not overtighten.

The stylus pen body is not included with these replacement tips.

Image: A diagram demonstrating the process of twisting an old stylus tip off and twisting a new replacement tip on.

5. Betjeningsvejledning

Once the replacement tip is securely installed, your stylus pen is ready for use. The conductive fiber tip provides a smooth gliding experience across your device's screen, allowing for precise input for drawing, writing, and navigation.

Image: A stylus pen with the conductive fiber tip actively being used on a tablet screen, demonstrating smooth operation for drawing.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your ELECOM P-TIPS03 replacement tips:

• Keep the tips clean and free from dust or debris. A soft, dry cloth can be used for gentle cleaning.
• Avoid applying excessive pressure when using the stylus, as this can prematurely wear down the tip.
• Store the stylus in a protective case or cover when not in use to prevent damage to the tip.
• Replace tips when they show signs of significant wear, such as reduced responsiveness or scratching on the screen.

7. Fejlfinding

If you experience issues with your stylus pen after replacing the tip, consider the following:

• Unresponsive or Intermittent Contact:
  • Ensure the tip is securely fastened to the stylus body.
  • Check the screen of your device for any dirt, smudges, or screen protectors that might interfere with contact.
  • Verify that the tip itself is not excessively worn or damaged. If so, replace it with a new one.
• Scratching on Screen:
  • Immediately cease use if you notice scratching. This indicates a damaged or defective tip.
  • Inspect the tip for any sharp edges or foreign particles embedded in the conductive fiber.
  • Replace the tip if any damage is found.

If problems persist, refer to the support information provided by ELECOM.

8. Specifikationer

9. Garanti og support

For warranty information or technical support regarding your ELECOM P-TIPS03 replacement tips, please refer to the official ELECOM website or contact ELECOM customer service directly. Keep your purchase receipt as proof of purchase.

ELECOM Official Webwebsted: https://www.elecom.co.jp/global/en/