1. Produktet er slutview
The PHILCO 51811 is a high-quality, adjustable recessed base designed for MR16 LED bulbs. Constructed from durable aluminum with a clean white finish, this base is suitable for installation in various ceiling types, including false ceilings, plasterboard, or concrete slabs (with appropriate housing). It includes an MR16 socket compatible with GU5.3 or Bi-pin type bulbs and a segment of electrical cable. Please note that the MR16 LED bulb itself is not included with this product.

Figure 1: The PHILCO 51811 MR16 LED recessed adjustable base. This image shows the circular, white aluminum base with its inner adjustable ring, designed to securely hold an MR16 LED bulb.
2. Sikkerhedsoplysninger
Læs venligst alle instruktioner omhyggeligt inden installation og brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.
- Always disconnect power at the circuit breaker before installing or servicing the fixture.
- Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring.
- Sørg for, at voltage supply is compatible with the MR16 bulb being used.
- Overskrid ikke det maksimale wattage rating of the MR16 bulb.
- Avoid touching the bulb directly after prolonged use, as it may be hot.
- Dette produkt er kun beregnet til indendørs brug.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter installationen:
- 1x PHILCO 51811 MR16 Recessed Adjustable Base (White, Aluminum)
- 1x MR16 Socket (GU5.3 / Bi-pin compatible)
- 1x Segment of Electrical Cable
- Note: MR16 LED bulb is NOT included.
4. Opsætning og installation
This recessed base is designed for installation in ceilings such as plasterboard, false ceilings, or concrete slabs (requiring a compatible recessed housing or 'bote').
- Forbered installationsområdet: Ensure the power supply to the installation area is turned off at the main circuit breaker. Create a circular opening in the ceiling with an appropriate diameter to accommodate the base and its housing (if used). The external diameter of the base is 9 cm.
- Tilslut ledninger: Connect the electrical cable segment provided with the MR16 socket to your main electrical wiring. Ensure all connections are secure and properly insulated according to local electrical codes.
- Insert MR16 Bulb: Carefully insert your MR16 LED bulb into the GU5.3/Bi-pin socket.
- Installer basen: Place the assembled base and bulb into the prepared ceiling opening. Secure the base using the integrated clips or springs (if present, typical for recessed fixtures) or by fastening it to the recessed housing. The base is adjustable, allowing you to direct the light as needed after installation.
- Gendan strøm: Once the base is securely installed and all connections are verified, restore power at the circuit breaker.
Vigtig: If you are unsure about any step of the installation process, consult a qualified electrician.
5. Betjeningsvejledning
Once installed and powered, the PHILCO 51811 recessed base operates in conjunction with the MR16 LED bulb. The light can be turned on or off via the wall switch connected to the circuit. The inner ring of the base allows for directional adjustment of the light beam.
- Justering af lysretning: Gently pivot the inner ring of the base to direct the MR16 bulb to your desired angle. Do not apply excessive force.
- Udskiftning af pære: Ensure power is off before attempting to replace the MR16 bulb. Allow the bulb to cool completely before handling.
6. Vedligeholdelse
The PHILCO 51811 recessed base requires minimal maintenance.
- Rensning: Disconnect power before cleaning. Wipe the exterior of the base with a soft, dry, or slightly damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
- Inspektion: Periodically inspect the base and wiring for any signs of wear or damage. If any damage is observed, disconnect power and consult a qualified electrician for repair or replacement.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. |
|
|
| Lyse flimrer. |
|
|
8. Specifikationer
- Model: PHILCO 51811
- Produkttype: Recessed Adjustable Base for MR16 LED
- Materiale: Aluminium
- Farve: Hvid
- Sokkeltype: MR16 (GU5.3 / Bi-pin)
- Indvendig diameter: 5.8 cm
- Udvendig diameter: 9 cm
- Højde: 3 cm
- Kompatibilitet: Suitable for plasterboard, false ceilings, or concrete slabs (with appropriate housing).
9. Garanti og support
Specific warranty information for the PHILCO 51811 is not provided in this manual. Please refer to your purchase documentation or contact the retailer for details regarding warranty coverage.
For technical support or inquiries, please contact PHILCO customer service or your authorized dealer.





