Onyx 1/10 4-Pole ESC/Brushless Motor Combo Instruction Manual

Sikkerhedsoplysninger

ADVARSEL: Læs HELE instruktionsmanualen for at blive fortrolig med produktets funktioner, før du bruger det. Manglende korrekt betjening af produktet kan resultere i skader på produktet, personlige ejendele og forårsage alvorlig personskade. Dette er et sofistikeret hobbyprodukt. Det skal betjenes med forsigtighed og sund fornuft og kræver grundlæggende mekaniske færdigheder. Manglende betjening af dette produkt på en sikker og ansvarlig måde kan resultere i personskade eller beskadigelse af produktet eller anden ejendom. Dette produkt er ikke beregnet til brug af børn uden direkte opsyn af voksne. Brug ikke dette produkt sammen med inkompatible komponenter, og modificer ikke dette produkt på nogen måde ud over de instruktioner, der er givet af Horizon Hobby, LLC. Produktmanualen indeholder instruktioner til sikkerhed, betjening og vedligeholdelse. Det er vigtigt at læse og følge alle instruktioner og advarsler i manualen før montering, opsætning eller brug for at fungere korrekt og undgå skader eller alvorlig personskade.

Produkt overview

The Onyx 1/10 4-Pole ESC/Brushless Motor Combo (Model ONXS0501) is designed for remote-controlled vehicles, offering a powerful 4000Kv brushless motor paired with a robust Electronic Speed Control (ESC). This combo features 3.5mm bullet connectors for the motor and an EC3 connector for the battery, providing a reliable and efficient power system for various RC applications.

Image: The Onyx 1/10 4-Pole ESC/Brushless Motor Combo, showing the blue 4000Kv motor on the right and the black Electronic Speed Control (ESC) unit with a cooling fan on the left. Both components are connected by wires, and the ESC has a power switch and battery connector.

Opsætning

Proper setup is crucial for optimal performance and longevity of your ESC/Brushless Motor Combo. Follow these steps carefully:

1. Montering af motoren: Securely mount the 4000Kv brushless motor in your vehicle's motor mount. Ensure proper gear mesh between the motor pinion and the vehicle's spur gear.
2. Montering af ESC'en: Install the Electronic Speed Control (ESC) in a location that allows for good airflow to the cooling fan and protects it from impacts and moisture. Use double-sided tape or screws as appropriate for your vehicle.
3. Motorforbindelse: Connect the three motor wires from the ESC to the motor's three terminals using the 3.5mm bullet connectors. The order of connection may affect motor rotation direction; if the motor spins in the wrong direction, swap any two of the three motor wires.
4. Batteriforbindelse: Connect your compatible battery pack to the ESC's EC3 connector. Ensure the battery voltage is within the ESC's specified operating range (e.g., 2S-3S LiPo).
5. Modtagerforbindelse: Plug the ESC's throttle lead into the throttle channel (typically channel 2) of your vehicle's receiver.
6. Opsætning af radiosystem: Ensure your radio transmitter is properly bound to the receiver and that throttle trim is set to neutral.
7. ESC kalibrering: Refer to the specific ESC manual (if provided separately or integrated) for throttle range calibration. This typically involves powering on the ESC while holding the throttle at full, then neutral, then full reverse on your transmitter to teach the ESC the radio's throttle endpoints.

Betjeningsvejledning

Once the combo is installed and calibrated, you are ready to operate your vehicle:

1. Tænd sekvens:
   • Turn on your radio transmitter first.
   • Tilslut batteriet til ESC.
   • Turn on the ESC using its power switch.
2. Indledende kontrol: Verify that the steering operates correctly and that the motor responds to throttle input as expected. If the motor spins in reverse, power off and swap any two motor wires.
3. Kørsel: Gradually apply throttle. Avoid sudden full throttle inputs, especially with high-power batteries, to prevent damage to drivetrain components. Monitor motor and ESC temperatures during operation.
4. Sluk-sekvens:
   • Sluk for ESC.
   • Afbryd batteriet fra ESC.
   • Turn off your radio transmitter.

Note: Always ensure adequate cooling for both the motor and ESC, especially during aggressive driving or in high ambient temperatures. Overheating can lead to reduced performance and component damage.

Opretholdelse

Regular maintenance will extend the life and performance of your Onyx ESC/Brushless Motor Combo:

• Rensning: After each use, especially in dusty or dirty conditions, gently clean the motor and ESC. Use a soft brush or compressed air to remove dirt and debris. Avoid using water or solvents directly on electronic components.
• Inspektioner:
  • Check all wire connections (motor, battery, receiver) for looseness or damage.
  • Inspect the motor's bullet connectors and the ESC's EC3 connector for signs of wear or corrosion.
  • Ensure the ESC's cooling fan is free of obstructions and spins freely.
  • Check the motor's shaft and bearings for smooth rotation.
• Opbevaring: When not in use, store the combo in a clean, dry place away from extreme temperatures and direct sunlight. Disconnect the battery from the ESC for storage.

Fejlfinding

If you encounter issues with your Onyx ESC/Brushless Motor Combo, refer to the following common troubleshooting steps:

Specifikationer

Garanti og support

For warranty information, technical support, or service inquiries regarding your Onyx 1/10 4-Pole ESC/Brushless Motor Combo, please contact the manufacturer, Horizon Hobby, LLC, directly. Retain your proof of purchase for any warranty claims.

It is recommended to visit the official Horizon Hobby website or contact their customer service for the most up-to-date support resources, FAQs, and contact details.