1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Philips Fixed TV Monitor Wall Mount Bracket, model SQM3221/27. This mount is designed to securely hold most 17-55 inch LED, LCD, OLED, HDTV, flat, and curved screen TVs and monitors weighing up to 55 lbs, with a maximum VESA mounting pattern of 200x200mm. Please read these instructions carefully before installation to ensure safe and proper use.
2. Hvad er der i æsken
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- Monteringsplade (x1)
- TV-beslag (x2)
- Instruktionsmanual (x1)
- Hardware Kit (x1) - Includes various screws, washers, lag bolts, and concrete anchors for different wall types and TV models.
Figur 2.1: Included components and hardware for the Philips SQM3221/27 TV mount.
3. Opsætning og installation
This section outlines the steps for installing your Philips Fixed TV Monitor Wall Mount. Ensure you have the necessary tools and understand the process before starting. The mount is designed for secure attachment to drywall studs, concrete, and brick walls.
3.1. Prepare the Wall and TV
- Locate Studs/Determine Wall Type: For drywall, use a stud finder to locate wooden studs. For concrete or brick, ensure the wall is solid and capable of supporting the weight of the TV and mount.
- Markér boresteder: Hold the mounting plate against the wall at the desired height and use a pencil to mark the drilling points. Use an integrated bubble level (if available on the mount) or a separate level to ensure the plate is perfectly horizontal.
- Bor pilothuller: Drill pilot holes at the marked locations according to the type of wall and the hardware being used (refer to the hardware kit for specific drill bit sizes).
- Fastgør TV-beslag: Secure the two TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
Figur 3.1: Overview of the easy mounting process.
3.2. Mount the Plate and TV
- Attach Mounting Plate to Wall: Align the mounting plate with the drilled pilot holes and secure it to the wall using the lag bolts and washers for studs, or concrete anchors for masonry. Tighten all fasteners firmly.
- Hæng fjernsynet op: Carefully lift the television (it is recommended to have at least two people for this step) and hook the TV brackets onto the mounting plate. Ensure the TV is properly seated and level.
- Fastgør tv'et: Locate the lockable safety bar or safety screws at the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement or theft.
Figur 3.2: Securing the TV with safety screws.
Video 3.1: A demonstration of the Philips Fixed Low Profile TV Mount installation process and features.
4. Betjeningsvejledning
The Philips SQM3221/27 is a fixed-position wall mount, meaning once installed, the TV's position is static. There are no adjustable movements for tilt, swivel, or extension. The primary operational feature is the lockable safety bar.
- Lockable Safety Bar: After hanging the TV on the wall plate, ensure the safety screws at the bottom of the TV brackets are fully tightened. This mechanism secures the display in place, preventing accidental slippage and providing protection against theft.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikkerheden af dit TV-vægbeslag.
- Periodisk eftersyn: Annually, inspect all mounting screws and bolts to ensure they remain tight. Over time, vibrations or minor shifts can loosen fasteners.
- Rensning: Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Vægtgrænse: Overskrid ikke den maksimale vægtkapacitet på 55 lbs.
6. Fejlfinding
Hvis du støder på problemer under eller efter installationen, kan du se følgende almindelige problemer og løsninger.
- TV'et er ikke i vater:
- Ensure the wall mounting plate was installed perfectly level. If not, minor adjustments may be possible by slightly loosening and re-tightening the wall screws, or by re-drilling if necessary.
- Verify that the TV brackets are securely and evenly attached to the back of the TV.
- Manglende hardware:
- Check all packaging thoroughly. If parts are genuinely missing, contact Philips customer support for assistance.
- Difficulty tightening safety screws:
- Ensure adequate clearance behind the TV to access the safety screws. If space is limited, a longer or angled Allen wrench may be required.
- Verify the TV is fully seated on the wall plate before attempting to tighten.
7. Specifikationer
| Modelnummer | SQM3221/27 |
| Mærke | Philips |
| Monteringstype | Vægmontering |
| Bevægelsestype | Fast |
| Kompatible tv-størrelser | 17-55 tommer |
| Maksimal vægtkapacitet | 55 lbs (25 kg) |
| VESA-kompatibilitet | Op til 200x200 mm |
| Produktdimensioner | 1.25 x 12.25 x 8 tommer (3.18 x 31.12 x 20.32 cm) |
| Varens vægt | 2.11 lbs (0.96 kg) |
| Fabrikant | Jasco Products Company, LLC |
Figur 7.1: Physical dimensions of the Philips SQM3221/27 TV mount.
8. Garanti og support
The Philips Fixed TV Monitor Wall Mount Bracket is backed by a limited lifetime replacement pledge. For any questions, issues, or to claim warranty support, please contact the US-based customer support team. They are available Monday-Friday, 7 AM - 8 PM CST.
Kontaktoplysninger kan typisk findes på produktemballagen eller hos producentens officielle webwebsted.
