ET2 Soji 2-Light LED Linear Pendant Instruction Manual

1. Introduktion

Tak for købetasing the ET2 Soji 2-Light LED Linear Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• Strømafbrydelse: Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Fixture Handling: Handle the fixture with care. Avoid dropping or striking the glass shades.
• Voltage: This fixture is designed for 120 Volts. Ensure your power supply matches this requirement.
• Kun indendørs brug: This product is intended for indoor use only. Do not install in wet or damp steder.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• ET2 Soji 2-Light LED Linear Pendant Fixture
• Instruktionsmanual
• Monteringshardware

4. Opsætning og installation

Professional installation is recommended. Ensure power is disconnected before proceeding.

1. Forbered installationsområdet: Turn off power at the circuit breaker. Clear the area where the pendant will be installed.
2. Monter baldakinen: The pendant includes a canopy with a diameter of 39.5 x 4.75 x 1.75 inches. Secure the mounting hardware to the junction box in the ceiling. This fixture is adaptable for sloped ceilings.
3. Tilslut ledninger: Follow the wiring diagrams provided in the included instruction manual. Connect the fixture's wires to the corresponding household wires (live, neutral, ground).
4. Fastgør beslag til baldakin: Carefully lift the fixture and attach it to the mounted canopy, ensuring all connections are secure.
5. Installer glasskærme: Gently attach the satin white glass shades to the fixture.

5. Betjeningsvejledning

Once installed and power is restored, the ET2 Soji LED Linear Pendant can be controlled via an app or a remote control, depending on your setup. Refer to the specific instructions provided with your smart control system for pairing and operation details.

• Tænd/sluk: Use the connected wall switch, remote control, or smart app to turn the light fixture on or off.
• Justering af lysstyrke: If connected to a compatible dimmer system, adjust brightness using the remote control or app.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your pendant light.

• Rensning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal frame and glass shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• lysdioder: The integrated LED light source has a rated life of 30,000 hours and is not user-replaceable.

7. Fejlfinding

If your pendant light is not functioning correctly, refer to the following common issues and solutions:

8. Specifikationer

9. Garanti og support

The ET2 Soji 2-Light LED Linear Pendant comes with a 2 års begrænset producentgaranti. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For warranty claims or technical support, please contact ET2 customer service. Keep your proof of purchase for warranty validation.