1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of the FF Dishwasher Ball Holder Kit, part number 8801349-77. This kit is designed to replace worn or damaged ball holders on the upper rack of compatible dishwashers, including those using Subzero part 428814. Proper installation ensures smooth and stable movement of the dishwasher's upper rack.
2. Sikkerhedsoplysninger
- Afbryd altid strømmen til opvaskemaskinen, inden du forsøger at installere eller vedligeholde den.
- Brug passende personlige værnemidler, såsom handsker, for at forhindre skader.
- Håndter delene forsigtigt for at undgå skader eller personskade.
- Hvis du er usikker på et trin, skal du kontakte en kvalificeret tekniker.
3. Pakkens indhold
Bekræft at alle komponenter er til stede i dit sæt:
- 2 x Dishwasher Ball Holder Kit (Part 8801349-77)
Figur 3.1: Two units of the FF Dishwasher Ball Holder Kit. These gray plastic components feature integrated metal balls designed to facilitate the smooth movement of the dishwasher's upper rack.
4. Opsætning og installation
Follow these steps to install the new ball holder kit:
- Afbryd strømmen: Unplug the dishwasher from the electrical outlet or turn off the circuit breaker supplying power to the appliance.
- Remove Upper Rack: Carefully pull out the upper dishwasher rack. Depending on your dishwasher model, you may need to remove the end caps or clips from the rack rails to fully detach the rack.
- Locate Old Ball Holders: Identify the existing ball holders on the upper rack rails. These are typically located at the front and/or rear of the rack where it connects to the rail system.
- Remove Old Ball Holders: Gently pry off or unclip the old, deteriorated ball holders. Note their orientation for correct installation of the new parts.
- Install New Ball Holders: Align the new FF Dishwasher Ball Holder Kit (Part 8801349-77) with the mounting points on the upper rack rail. Press firmly until it snaps securely into place. Ensure the ball holders are oriented correctly to allow the rack to slide smoothly.
Figur 4.1: Et alternativ view of the FF Dishwasher Ball Holder Kit, showing the structural design and the integrated ball bearings. This view helps in understanding the correct alignment during installation onto the dishwasher's upper rack rail.
- Reinstall Upper Rack: Carefully slide the upper rack back onto its rails, ensuring the new ball holders engage properly.
- Test bevægelse: Gently slide the upper rack in and out to confirm smooth and unobstructed movement.
- Tilslut strøm igen: Once installation is complete and verified, reconnect power to the dishwasher.
5. Betjening
Once correctly installed, the FF Dishwasher Ball Holder Kit facilitates the smooth gliding of your dishwasher's upper rack. No special operation is required beyond the normal use of your dishwasher. The ball holders ensure the rack moves freely, preventing binding or sticking when loading and unloading dishes.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your dishwasher's upper rack system:
- Regelmæssig inspektion: Periodically inspect the ball holders for any signs of wear, cracks, or damage.
- Rensning: If food debris or grime accumulates around the ball holders, gently clean them with a soft brush and mild detergent. Rinse thoroughly.
- Undgå overbelastning: Do not overload the upper rack, as excessive weight can put undue stress on the ball holders and rails.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Upper rack does not slide smoothly. | Incorrect installation of ball holders, obstructions on rails, or damaged new part. | Verify ball holders are securely snapped into place and correctly oriented. Check rails for food debris or foreign objects. If the new part is damaged, replace it. |
| Upper rack still sags or is unstable. | Ball holders not fully engaged, or other rack components are damaged. | Ensure ball holders are fully seated. Inspect other parts of the rack and rail system for damage that may require additional repairs. |
8. Specifikationer
- Varenummer: 8801349-77
- Mærke: FF
- Kompatibilitet: Designed to fit dishwashers requiring Subzero part 428814, and other compatible models (e.g., Asko dishwashers).
- Materiale: Durable plastic with metal ball bearings.
- Mængde: 2 pieces per kit.
- ASIN: B07TWSWP27
- Dato først tilgængelig: 4. juli 2019
9. Garanti og support
For garantioplysninger eller teknisk support henvises til sælgers politikker eller kontaktes direkte af producenten. Gem din købskvittering som købsbevis.