Indledning
Thank you for choosing the Blow JS-19 16800 mAh Powerbank Jump Starter. This versatile device is designed to provide emergency jump-starting for vehicles, act as a portable power bank for electronic devices, and offer an integrated LED flashlight for various situations. Please read this manual carefully before using the product to ensure safe and optimal performance.
Vigtige sikkerhedsinstruktioner
- Always ensure the jump starter is fully charged before use, especially for jump-starting a vehicle.
- Do not attempt to jump-start a vehicle if the battery indicator shows less than 50% charge.
- Tilslut den røde clamp til den positive (+) pol på bilbatteriet og den sorte terminalamp til den negative (-) pol eller et passende jordpunkt på køretøjets chassis.
- Undgå kortslutning af jumpstarterens kobling.amps by touching them together.
- Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller fugt.
- Opbevares utilgængeligt for børn.
- If the device becomes excessively hot during use, disconnect it immediately and allow it to cool down.
- Do not disassemble or modify the device. This will void the warranty and may cause damage or injury.
Pakkens indhold
Pak forsigtigt kassen ud, og sørg for, at alle dele er til stede og i god stand. Hvis der mangler eller er beskadigede dele, bedes du kontakte din forhandler.
Included accessories for the Blow JS-19 Powerbank Jump Starter, featuring smart jump cables, various charging adapters (wall, car), and a multi-device USB charging cable.
- Blow JS-19 Powerbank Jump Starter Unit
- Smart Jump Cables (Red/Black)
- AC vægoplader
- Bil oplader
- Multi-device USB Charging Cable
- Various DC Adapter Tips
- Brugervejledning (dette dokument)
Produkt overview
Familiarize yourself with the different parts and functions of your Blow JS-19 Powerbank Jump Starter.
Front view of the Blow JS-19 Powerbank Jump Starter, displaying the digital charge indicator, 'ENGINE START' button, and an integrated compass.
Bag view of the Blow JS-19 Powerbank Jump Starter, showing the multiple USB output ports, the main ON/OFF switch, and the dedicated jump start cable connection ports.
Komponenter:
- Starthjælpsport: Connection point for the smart jump cables.
- USB-udgangsporte: Til opladning af smartphones, tablets og andre USB-drevne enheder.
- LED display: Viser batteriets opladningsprocenttage og operationel status.
- TÆND/SLUK -kontakt: Tænder eller slukker for enheden.
- LED lommelygte: Giver belysning.
- Kompas: Integreret til navigationshjælp.
- Safety Hammer/Glass Breaker: Located on the side for emergency situations.
- DC-indgangsport: Til opladning af jumpstarterenheden.
Opsætning og første opladning
Before first use, it is recommended to fully charge the Blow JS-19 Powerbank Jump Starter. This ensures maximum performance and extends battery life.
- Connect the AC wall charger to the DC Input Port on the jump starter.
- Plug the AC wall charger into a standard electrical outlet.
- LED-displayet viser opladningsstatus. Oplad indtil displayet viser 100%.
- Når den er fuldt opladet, skal du frakoble opladeren.
Note: For optimal battery health, recharge the unit every 3-6 months if not in regular use.
Betjeningsvejledning
1. Start af et køretøj med startkabler
Sørg for, at jumpstarteren har mindst 50% opladning, før du forsøger at jumpstarte et køretøj.
- Turn off the vehicle's ignition and all accessories (lights, radio, etc.).
- Connect the smart jump cables to the jump start port on the Blow JS-19 unit. Ensure a secure connection.
- Tilslut rød (+) clamp til den positive pol på køretøjets batteri.
- Tilslut sort (-) clamp til den negative pol på køretøjets batteri eller en solid, umalet metaldel af motorblokken/chassiset.
- Sørg for at clamps are securely attached and not touching any moving parts.
- Press the 'ENGINE START' button on the jump starter (if applicable, or ensure the unit is powered on).
- Start køretøjets motor. Hvis den ikke starter med det samme, skal du vente 30 sekunder, før du prøver igen. Tørn ikke i mere end 3 sekunder pr. forsøg.
- Når køretøjet starter, skal du straks fjerne den sorte (-) klud.amp først, derefter den røde (+) clamp fra køretøjets batteri.
- Disconnect the smart jump cables from the Blow JS-19 unit.
2. Brug som powerbank
The Blow JS-19 can charge various electronic devices via its USB output ports.
- Turn on the Blow JS-19 unit using the ON/OFF switch.
- Tilslut din enheds USB-opladerkabel til en af USB-udgangsportene på jumpstarteren.
- Tilslut den anden ende af kablet til din elektroniske enhed.
- Charging will begin automatically. The LED display will show the remaining charge of the power bank.
- Once your device is charged, disconnect it from the power bank. Turn off the power bank to conserve battery.
3. Brug af LED-lommelygten
The integrated LED flashlight provides illumination in low-light conditions.
- Turn on the Blow JS-19 unit using the ON/OFF switch.
- Locate the flashlight button (refer to Product Overview for exact location).
- Press the button once to turn on the flashlight.
- Press again to cycle through different modes (e.g., steady light, strobe, SOS).
- Press and hold, or cycle through all modes, to turn off the flashlight.
Opretholdelse
- Genopladning: Recharge the unit after each jump-start or heavy use. For long-term storage, recharge every 3-6 months to maintain battery health.
- Opbevaring: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its protective carrying case when not in use.
- Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Kabelpleje: Inspect jump cables and clamps for any damage before each use. Replace if frayed or damaged.
The Blow JS-19 Powerbank Jump Starter and its complete set of accessories organized within its protective carrying case.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Vehicle does not start after jump-start attempt. | Startbatteriet er lavt; clamps are not properly connected; vehicle battery is severely damaged; other vehicle issues. | Ensure jump starter is fully charged (>50%). Check clamp connections for proper contact. Consult a mechanic if vehicle still won't start. |
| Jumpstarteren oplader ikke. | Charger not connected properly; faulty charger or cable; unit malfunction. | Check all connections. Try a different outlet. If issue persists, contact customer support. |
| USB-enheder oplades ikke. | Jump starter is off; USB cable is faulty; device is incompatible. | Ensure jump starter is powered on. Try a different USB cable. Check device compatibility. |
| LED-lommelygten virker ikke. | Jump starter is off; low battery. | Ensure jump starter is powered on. Recharge the unit. |
Specifikationer
| Feature | Værdi |
|---|---|
| Mærke | Blæse |
| Modelnummer | JS-19 (5900800000000) |
| Batterikapacitet | 16800 mAh |
| Batteritype | Lithium-ion |
| Voltage | 5 Volts (USB Output) |
| Type køretøjstjeneste | Bil |
| Varens vægt | 5 kilo |
| Produktmål (L x B x H) | 2.79 x 24.64 x 16.51 cm |
Garanti og support
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Blow customer service department.
Please have your model number (JS-19) and proof of purchase ready when contacting support.
