1. Introduktion
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your hykolity 4 Pack Linkable LED Shop Lights. Please read this manual thoroughly before installation and retain it for future reference.
2. Sikkerhedsoplysninger
- Afbryd altid strømmen før installation, vedligeholdelse eller rengøring.
- Sørg for, at strømforsyningen voltage is compatible with the fixture's requirements (100-277VAC).
- Forsøg ikke at ændre eller adskille armaturet. Der er ingen dele indeni, som kan serviceres af brugeren.
- Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.
- Denne lampe er kun beregnet til indendørs brug og er ikke vandafvisende.
- Holdes væk fra brændbare materialer.
- If any damage occurs to the fixture or wiring, discontinue use immediately and contact qualified personnel.
3. Pakkens indhold
Each hykolity 4 Pack Linkable LED Shop Light package includes the following components:
- 4 x 4FT LED Shop Lights (42W, 4400lm, 5000K Daylight)
- 4 x 59-inch Power Cords with On/Off Switch
- Hanging Chains (for each light)
- J-Hooks (for hanging installation)
- Mounting Screws (for surface mount installation)
- Plastic Anchors (for drywall surface mount)
- Mounting Brackets (for surface mount installation)
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | hykolitet |
| Modelnavn | HB-Q10-50 |
| Magt | 42 watt |
| Lysstyrke | 4400 lumen |
| Farvetemperatur | 5000K dagslys |
| Voltage | 100-277 Volt AC |
| Materiale | Aluminium, polycarbonat |
| Produktdimensioner | 45.5 cm L x 3.5 cm B x 0.99 cm H |
| Lyskildetype | LED |
| Særlige funktioner | Non-dimmable, Shock and vibration resistant, Instant On, Shatter resistant |
| Installationstype | Hanging / Surface Mount |
| Strømkilde | Elektrisk med ledning |
| Indendørs/Udendørs brug | Indendørs |
| Certificering | ETL Certificeret |
5. Installation
The hykolity LED Shop Lights offer versatile installation options: hanging mount or surface mount.
5.1. Hængende montering
- Determine the desired hanging location and mark the positions for the J-hooks. Ensure the hooks are securely fastened into a ceiling joist or appropriate anchor point.
- Attach the hanging chains to the J-hooks.
- Connect the chains to the mounting points on the LED shop light fixture. Adjust chain length to achieve the desired height.
5.2. Overflademontering
- Mark the desired mounting locations on the ceiling or wall.
- If mounting to drywall, drill pilot holes and insert the plastic anchors. For wood surfaces, drill pilot holes directly.
- Secure the mounting brackets to the surface using the provided mounting screws.
- Align the LED shop light fixture with the installed mounting brackets and snap it into place.
5.3. Linking Multiple Lights
These LED shop lights are designed to be linkable, allowing you to connect up to 6 units together for extended lighting coverage.
- Install the first light fixture as either a hanging or surface mount.
- Connect the power cord of the first light to a standard electrical outlet.
- For subsequent lights, use the integrated linking connectors on the ends of the fixtures to create a continuous chain. Ensure secure connections.
- Only one power cord is needed for a linked series of up to 6 lights.
6. Betjening
Once installed and connected to a power source, operate the hykolity LED Shop Light using the integrated on/off switch located on the power cord. For linked units, a single switch will control all connected lights.
7. Vedligeholdelse
These LED shop lights are designed for long-lasting performance with minimal maintenance.
- Rensning: Ensure the fixture is off and cool before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspektion: Periodically check the mounting hardware and electrical connections to ensure they are secure.
- Udskiftning af pære: The LED light source is integrated and not user-replaceable. The fixture has a lifespan of up to 50,000 hours.
8. Fejlfinding
8.1. Light Does Not Turn On
- Kontroller, om netledningen er tilsluttet korrekt til en fungerende stikkontakt.
- Ensure the on/off switch on the power cord is in the 'ON' position.
- Verify that the electrical outlet is receiving power by testing it with another device.
- For linked lights, ensure all connections between fixtures are secure.
8.2. Light Flickers
- Sørg for, at strømforsyningen er stabil og inden for det angivne volumtage-område (100-277VAC).
- Check for loose connections in the power cord or between linked fixtures.
- If flickering persists, try plugging the light into a different outlet to rule out electrical supply issues.
9. Garanti og support
hykolity confidently guarantees all shop lights for 5 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact hykolity customer service. Keep your purchase receipt as proof of purchase.
