Aerocool Streak Mid-Tower ATX PC Gaming-kabinet Brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Aerocool Streak Mid-Tower ATX PC Gaming Case. Designed for both new and experienced PC builders, the Streak case offers a compact design with a polished aluminum front panel, vibrant RGB lighting, and a full tempered glass side panel to showcase your components. It supports various cooling configurations to ensure optimal performance for your system.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing or operating the PC case. Failure to do so may result in personal injury or damage to the product.

• Afbryd altid strømforsyningen fra stikkontakten, inden du udfører nogen form for installation eller vedligeholdelse.
• Be aware of sharp edges inside the case. Handle components with care to avoid cuts.
• Hold små dele og skruer væk fra børn.
• Sørg for korrekt jording for at forhindre elektrisk stød.
• Udsæt ikke etuiet for vand eller for høj luftfugtighed.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Aerocool Streak Mid-Tower ATX PC Gaming Case
• Accessory box (screws, standoffs, cable ties, etc.)
• Brugervejledning (dette dokument)

4. Case Components Overview

Familiarize yourself with the various parts of your Aerocool Streak case.

Figur 4.1: Vinklet view of the Aerocool Streak PC case, showcasing the RGB front panel and tempered glass side panel.

Figur 4.2: Top-down vinklet view of the Aerocool Streak PC case, highlighting the top panel and front I/O ports.

4.1 Forreste I/O-porte

The front I/O panel provides convenient access to essential connections.

Figur 4.3: Close-up of the front I/O panel, showing the power button, LED control button, USB 3.0 port, two USB 2.0 ports, and HD audio/microphone jacks.

• Power knap: For at tænde/slukke systemet.
• LED-kontrolknap: To cycle through RGB lighting modes.
• USB 3.0-port (x1): Til højhastigheds dataoverførsel.
• USB 2.0-porte (x2): Til standard USB-enheder.
• HD Audio & Mic Jacks: Til tilslutning af hovedtelefoner og mikrofoner.

4.2 Indvendig indretning

The interior is designed for efficient component installation and cable management.

Figur 4.4: Indre view of the Aerocool Streak PC case, showing the motherboard tray, drive bays, and cable routing cutouts.

5. Opsætning og installation

Follow these steps to assemble your PC components within the Aerocool Streak case.

5.1 Forberedelse

• Pak etuiet ud, og fjern alt emballagemateriale.
• Placer etuiet på en stabil, flad overflade.
• Gather necessary tools: Phillips head screwdriver, cable ties (included in accessory box).
• Remove the tempered glass side panel by unscrewing the four thumb screws.

5.2 Installation af bundkort

The Aerocool Streak supports ATX, Micro-ATX, and Mini-ITX motherboards.

Figur 5.1: Diagram illustrating the compatible motherboard sizes (Mini-ITX, Micro-ATX, ATX) within the case.

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor.
2. Place your motherboard carefully onto the standoffs, aligning the screw holes.
3. Fastgør bundkortet med de medfølgende skruer.

5.3 Installation af strømforsyningsenhed (PSU).

The case features a bottom-mount PSU design.

1. Skub strømforsyningen ind i det dertil indrettede rum nederst på bagsiden af ​​kabinettet.
2. Secure the PSU to the case rear with screws.

5.4 Installation af lagerdrev

Install your 2.5" SSDs and 3.5" HDDs.

• 2.5" SSD'er: Mount SSDs to the designated 2.5" drive trays or mounting points on the motherboard tray.
• 3.5" harddiske: Install HDDs into the drive cage located beneath the PSU shroud.

5.5 Expansion Card Installation (Graphics Card, etc.)

The case supports high-end graphics cards up to 335mm in length.

1. Fjern de nødvendige PCIe-slotdæksler fra bagsiden af ​​kabinettet.
2. Insert your expansion card into the corresponding PCIe slot on the motherboard.
3. Fastgør kortet med en skrue.

5.6 Installation af kølesystem

The Aerocool Streak supports both air and liquid cooling solutions.

Figur 5.2: Diagram showing air cooling options, including front 120mm fans (optional) and a rear 80mm fan (included).

Figur 5.3: Diagram illustrating liquid cooling support, specifically a 240mm radiator at the front (optional).

• Luftkøling: The case supports up to two 120mm fans at the front (optional) and includes one 80mm fan at the rear.
• Væskekøling: A 240mm radiator can be installed at the front of the case (optional).
• Install fans or radiators into their respective mounting points and secure them with screws.

5.7 Kabelstyring

Brug kabelføringsudskæringerne og fastgørelsespunkterne bag bundkortbakken til at organisere kablerne for forbedret luftgennemstrømning og æstetik.

1. Route all power and data cables through the designated cutouts.
2. Use cable ties to bundle and secure cables neatly.

6. Betjeningsvejledning

6.1 Tænd dit system

1. Sørg for, at alle komponenter er korrekt installeret, og at alle kabler er sikkert tilsluttet.
2. Connect the power cable to your PSU and then to a wall outlet.
3. Sæt tænd/sluk-knappen på strømforsyningen i positionen 'ON'.
4. Press the power button on the front I/O panel of the case to start your system.

6.2 RGB-lysstyring

The Aerocool Streak features 18 distinct RGB lighting modes on its front panel.

Figur 6.1: The Aerocool Streak PC case with its vibrant RGB lighting illuminated on the front panel.

• Tryk på LED-kontrolknap on the front I/O panel to cycle through the 18 available lighting modes.
• These modes include 11 RGB flow modes and 7 static color modes.

7. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre lang levetid og optimal ydeevne for dit pc-kabinet og komponenter.

7.1 Cleaning the Case

• Ydre: Brug en blød, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners.
• Indre: Periodically use compressed air to remove dust buildup from inside the case, especially around fans and heatsinks.

7.2 Vedligeholdelse af støvfilter

The case may include removable dust filters to prevent dust ingress. Clean these filters regularly.

1. Locate and carefully remove any dust filters (e.g., top, bottom, front).
2. Rengør filtrene med vand og mild sæbe, eller brug trykluft.
3. Sørg for, at filtrene er helt tørre, før de monteres igen.

8. Fejlfinding

If you encounter issues with your Aerocool Streak case, refer to the following common problems and solutions.

• Systemet tænder ikke:
  • Check all power connections, including the PSU to the wall, PSU switch, and motherboard power cables.
  • Ensure the front panel power switch cable is correctly connected to the motherboard.
• RGB-belysningen virker ikke:
  • Verify that the RGB lighting cables are properly connected to the power supply or motherboard RGB header.
  • Press the LED control button to cycle through modes, as it might be on a static black mode.
• Poor airflow/overheating:
  • Sørg for, at alle kabinetblæsere drejer korrekt.
  • Rengør eventuelle støvfiltre og interne komponenter.
  • Verify proper fan orientation for optimal airflow (intake/exhaust).

9. Specifikationer

10. Garanti og support

The Aerocool Streak PC Gaming Case comes with a 2-year warranty on parts. For technical support, warranty claims, or further assistance, please contact your retailer or the official Aerocool support channels. Keep your proof of purchase for warranty validation.