Yaheetech 10x15 Heavy Duty Pop Up Canopy Tent

1. Introduktion

This manual provides essential instructions for the safe and effective setup, operation, maintenance, and storage of your Yaheetech 10x15 Heavy Duty Pop Up Canopy Tent. Please read all instructions carefully before assembly and retain this manual for future reference.

2. Sikkerhedsoplysninger

ADVARSEL:

• Opbevares utilgængeligt for børn.
• Må ikke anvendes i nærheden af ​​åben ild.
• Stakes can be a tripping hazard.
• Ensure tent is securely anchored during use.
• Overskrid ikke den maksimale vægtkapacitet.
• Do not leave canopy unattended in severe weather conditions (high winds, heavy rain, snow). Disassemble and store the canopy to prevent damage or injury.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

• 1 x Pop Up Frame (Alloy Steel)
• 1 x Canopy Top Fabric (500D Oxford Cloth with PU Coating)
• 1 x bæretaske med hjul
• 4 x sandsække
• 8 x Ground Anchors (Stakes)
• 4 x Guy Lines

4. Opsætningsvejledning

Two adults are recommended for safe and efficient setup.

1. Udvid rammen: Place the folded frame in the desired location. With a partner, grasp opposite legs of the frame and slowly pull outwards, lifting the frame slightly off the ground as you expand it. Continue until the frame is about halfway open.
2. Attach the Canopy Top: Carefully drape the canopy top fabric over the partially expanded frame. Secure the corners of the fabric to the frame legs using the integrated hook-and-loop fasteners. Ensure the fabric is evenly distributed.
3. Fully Open the Frame: Once the fabric is attached, continue to expand the frame until it is roughly 90% open. Place one hand above the leg and one hand below the truss, then lift the truss until the lock clicks into place. Repeat for all corners.
4. Stræk benene ud: Press the button on each leg and lift the outer leg to extend it to your desired canopy height. There are three adjustable height settings: 10.3', 10.6', or 10.9'. Ensure all legs are locked securely at the same height.
5. Fastgør baldakinen: Attach the guy lines to the canopy corners and stake them firmly into the ground. Fill the sandbags with sand or other heavy material and attach them to the canopy legs for additional stability.

Opsætning af videoguide

Video 1: Step-by-step guide for setting up the 10x15 Pop Up Canopy Tent. This video demonstrates the frame expansion, fabric attachment, and leg extension process.

Video 2: Detailed installation process for the Yaheetech Pop Up Canopy Tent, showing key steps for a secure setup.

5. Betjeningsvejledning

Justering af højden

The canopy features telescopic legs with three height settings: 10.3', 10.6', and 10.9'. To adjust, simply press the button on each leg and slide the outer leg up or down until it locks into the desired position. Ensure all four legs are set to the same height for stability.

Using the Banner Section

The canopy includes a dedicated banner section for easy display. Utilize this area for signage or decorative banners as needed for commercial events or personal gatherings.

6. Disassembly and Storage

Disassembly is the reverse of the setup process. Ensure the area is clear and free of obstructions.

1. Fjern forankring: Detach sandbags and ground stakes/guy lines.
2. Træk benene tilbage: Press the buttons on each leg and retract the outer legs to their lowest position.
3. Skjul ramme: Release the locking mechanisms on the frame trusses and gently push the frame inwards from opposite sides until it is fully collapsed.
4. Remove Canopy Top: Carefully remove the canopy top fabric from the collapsed frame. Fold the fabric neatly to prevent wrinkles and damage.
5. Pack into Carry Bag: Place the folded frame and canopy top into the wheeled carry bag. Utilize the internal and external straps to secure the contents. The compact folded size is approximately 11.4" L × 9" W × 61.4" H.

Takedown Video Guide

Video 3: This video also demonstrates the takedown and storage process for the canopy tent.

7. Vedligeholdelse

• Rensning: Rengør baldakinens stof med mild sæbe og vand. Brug ikke skrappe kemikalier eller slibende rengøringsmidler. Lad det lufttørre helt før opbevaring.
• Rammepleje: Inspect the steel frame regularly for any signs of damage or rust. Clean any dirt or debris from the frame.
• Opbevaring: Store the canopy in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.

8. Fejlfinding

• Difficulty Expanding/Collapsing: Ensure all locking mechanisms are disengaged. Apply gentle, even pressure from opposite sides. Do not force the frame.
• Water Accumulation on Top: Ensure the canopy fabric is taut and properly secured to the frame. Adjust leg heights if necessary to create proper tension and prevent pooling.
• Ustabilitet: Always use all provided sandbags, ground anchors, and guy lines. Ensure they are properly installed and secured. Do not use in high winds.

9. Specifikationer

10. Garanti og support

For warranty information or customer support, please refer to the product packaging or contact Yaheetech directly through their official channels. Details regarding returns and customer service can often be found on the retailer's webwebstedet hvor produktet blev købt.