1. Introduktion
This manual provides essential instructions for the safe installation, operation, and maintenance of your APC SMC1500-2UC Smart-UPS 1500VA Rackmount Uninterruptible Power Supply. The Smart-UPS is designed to provide reliable power protection for electronic equipment, safeguarding against power outages, sags, surges, and other power disturbances. Please read this manual thoroughly before installing or operating the unit.
2. Sikkerhedsoplysninger
ADVARSEL: Risiko for elektrisk stød eller eksplosion
- Denne UPS indeholder farlige stoffertages. Do not attempt to disassemble the unit. There are no user-serviceable parts inside.
- Service af batterier skal udføres eller overvåges af personale, der har viden om batterier og de nødvendige forholdsregler. Hold uautoriseret personale væk fra batterier.
- Bortskaf ikke batterier i åben ild. Batterierne kan eksplodere.
- Batterier må ikke åbnes eller ødelægges. Frigivet elektrolyt er skadelig for hud og øjne. Det kan være giftigt.
- Tilslut kun UPS'en til en jordet stikkontakt.
- Sørg for tilstrækkelig ventilation omkring UPS'en. Bloker ikke ventilationsåbningerne.
3. Pakkens indhold
The APC SMC1500-2UC Smart-UPS package typically includes:
- APC SMC1500-2UC Smart-UPS Unit
- Documentation (User Manual, Safety Guide)
- Rackmount hardware (rails, screws)
- USB-kommunikationskabel
- Seriel kommunikationskabel
4. Produktet er slutview
4.1 Nøglefunktioner
- 1500VA / 900W Capacity: Provides robust power backup for critical equipment.
- Pure Sine Wave Output: Sikrer kompatibilitet med følsom elektronik.
- Automatisk voltage Forordning (AVR): Corrects minor power fluctuations without using battery power, extending battery life.
- NEMA 5-15P Input: Standard input plug for 120V power.
- (8) NEMA 5-15R Outputs: Multiple outlets for connecting protected devices.
- APC SmartConnect: Cloud-based remote monitoring feature for automatic notifications, firmware updates, and advanced support.
4.2 Frontpanel
Billede 1: Front view of the APC SMC1500-2UC Smart-UPS. This image displays the front panel of the UPS, featuring the LCD screen which shows real-time status information such as input voltage and battery charge. To the right of the screen are control buttons for navigation and power management. The front also includes a ventilation grille.
Frontpanelet har et LCD-display, der viser statusinformation i realtid, herunder input/output lydstyrke.tage, battery charge level, and load capacity. Control buttons allow for navigation through menus, power on/off, and alarm silencing.
4.3 Bagpanel
Billede 2: Vinklet view of the APC SMC1500-2UC Smart-UPS. This image provides an angled perspective of the UPS, highlighting its rackmount form factor with mounting ears visible on the sides. The front panel with its LCD and controls is also clearly visible, giving a comprehensive view of the unit's design.
The rear panel includes the NEMA 5-15P input power cord, eight NEMA 5-15R output receptacles for connected equipment, a USB port, a serial port, and an APC SmartConnect port for network monitoring.
5. Opsætning
5.1 Rackmontering
The SMC1500-2UC is designed for 2U rack installation. Use the provided rackmount hardware to securely install the UPS into a standard 19-inch equipment rack. Ensure adequate space for ventilation around the unit.
5.2 Connecting to Power and Equipment
- Connect the UPS input power cord (NEMA 5-15P) to a grounded 120V AC wall outlet. Avoid connecting to surge protectors or extension cords.
- Lad UPS'en oplade i mindst 24 timer før første brug for at sikre fuld batterikapacitet.
- Connect your critical equipment (servers, network devices, etc.) to the NEMA 5-15R output receptacles on the rear of the UPS. Ensure the total load does not exceed the UPS capacity (900W).
- For remote monitoring, connect an Ethernet cable from your network to the APC SmartConnect port on the rear of the UPS.
- Optionally, connect the USB or serial cable to a computer for local monitoring and management.
5.3 Første opstart
After connecting the UPS and allowing initial charging, press the power button on the front panel to turn on the unit. The LCD display will illuminate, and the UPS will perform a self-test. The UPS is now ready to provide protected power.
6. Betjeningsvejledning
6.1 Tænd/sluk
- For at tænde: Press and hold the power button on the front panel until the unit beeps and the LCD illuminates.
- For at slukke: Press and hold the power button until the unit beeps and the LCD turns off. Ensure all connected equipment is safely shut down before powering off the UPS.
6.2 LCD-skærm og navigation
The LCD display provides real-time information. Use the navigation buttons (up/down arrows) to scroll through various screens displaying input/output voltage, belastningsprocenttage, battery charge, estimated runtime, and event logs. The 'Enter' button confirms selections, and the 'Escape' button returns to the previous screen.
6.3 APC SmartConnect
APC SmartConnect allows for remote monitoring of your UPS via a secure web portal. Once the UPS is connected to your network, register your device at smartconnect.apc.com. This service provides automatic notifications, firmware updates, and diagnostic support.
7. Vedligeholdelse
7.1 Udskiftning af batteri
The UPS batteries are user-replaceable. Refer to the APC website or contact APC support for specific instructions and compatible replacement battery cartridges (RBCs). Always use genuine APC replacement batteries to ensure optimal performance and safety. Disconnect the UPS from all power sources before attempting battery replacement.
7.2 Rengøring
Periodically clean the exterior of the UPS with a soft, dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating. Do not use liquid or aerosol cleaners directly on the unit.
8. Fejlfinding
This section addresses common issues you might encounter with your APC SMC1500-2UC Smart-UPS.
- UPS'en tænder ikke: Ensure the input power cord is securely connected to a live, grounded outlet. Check the circuit breaker. Verify the battery is connected internally.
- UPS'en bipper konstant: Dette indikerer ofte et lavt batteri eller en overbelastningstilstand. Kontroller belastningsprocenten.tage on the LCD. If overloaded, disconnect non-essential equipment. If low battery, allow the UPS to charge.
- Batteri oplades ikke: Ensure the UPS is connected to a constant power source. If the issue persists after 24 hours of charging, the battery may need replacement.
- "Overload" message on LCD: The total power draw of connected equipment exceeds the UPS capacity. Disconnect some equipment immediately.
- SmartConnect not connecting: Verify the Ethernet cable is properly connected to the SmartConnect port and your network. Ensure your network allows outbound connections to APC's SmartConnect service.
For more detailed troubleshooting or issues not listed here, refer to the APC support webwebstedet eller kontakt teknisk support.
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | SMC1500-2UC |
| Kapacitet (VA/Watt) | 1500VA / 900W |
| Input bindtage | 120 volt |
| Indgangsforbindelse | NEMA 5-15P |
| Udgangsforbindelser | (8) NEMA 5-15R |
| Formfaktor | Stativ (2U) |
| Produktmål (H x B x D) | 3.4 x 17 x 18.8 tommer (8.6 x 43.2 x 47.8 cm) |
| Varens vægt | 63 pund (28.6 kg) |
| Batteritype | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
| Typisk genopladningstid | 3 timer (til 90%) |
10. Garanti og support
10.1 Amazons fornyede garanti
This product is sold as an Amazon Renewed item. It is professionally inspected and tested to work and look like new. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under the Amazon Fornyet Garanti.
10.2 APC Support
For technical assistance, product information, or warranty inquiries related to the APC Smart-UPS, please visit the official APC website or contact APC customer support. The SmartConnect feature is free during the standard warranty period of the UPS.
