Indledning
The ECHO SRM-3020T is a professional-grade gasoline string trimmer designed for efficient and productive workdays. It features a lightweight construction, a Speed-Feed 500 cutting head, and a 20-inch cutting swath, making it suitable for quickly powering through various trimming tasks.
Image: The ECHO SRM-3020T string trimmer, showcasing its full length with the engine at one end and the cutting head at the other, along with the handle.
Vigtige sikkerhedsoplysninger
Always read and understand all safety warnings and instructions before operating this equipment.
Always wear appropriate protective clothing, including eye protection, when operating this string trimmer. Be aware of potential flying debris and keep bystanders at a safe distance. Use in a well-ventilated area to avoid exhaust fumes. Do not operate the trimmer if you are tired or under the influence of drugs or alcohol.
- Øjenbeskyttelse: Bær altid sikkerhedsbriller eller beskyttelsesbriller.
- Høreværn: Use earplugs or earmuffs.
- Fodbeskyttelse: Bær robust, skridsikkert fodtøj.
- Håndbeskyttelse: Use heavy-duty gloves.
- Ryd område: Ensure the work area is clear of people and pets.
- Brændstofhåndtering: Handle gasoline with extreme care. Store in approved containers.
- Ventilation: Operate only in well-ventilated outdoor areas.
- Inspektion: Before each use, inspect the trimmer for loose parts, damage, or wear.
Opsætning
- Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Kontroller, at alle dele, der er anført på pakkelisten, er til stede.
- Håndtagssamling: Attach the handle to the shaft as indicated in the assembly diagram. Ensure it is securely fastened with the provided hardware. The handle should be positioned for comfortable and balanced operation.
- Vagtsamling: Securely attach the cutting guard to the trimmer head assembly using the designated screws or bolts. This guard is crucial for operator safety and must always be in place during operation.
- Fuel Mixing and Filling:
- The SRM-3020T uses a 2-stroke engine. Mix fresh unleaded gasoline with a high-quality 2-stroke engine oil at the ratio specified in the engine manual (typically 50:1 for ECHO products).
- Use a clean, approved fuel container.
- Fill the fuel tank carefully, avoiding spills. Do not overfill. Securely replace the fuel cap.
- Loading Trimmer Line (Speed-Feed 500 Head):
- Align the eyelets on the Speed-Feed 500 head.
- Insert the appropriate diameter trimmer line (e.g., .095 Black Diamond) through one eyelet and push it through until an equal length extends from both sides.
- Twist the knob on the head to wind the line into the spool. The line will automatically feed as you twist.
Betjeningsvejledning
Start af motoren
- Plads på flad overflade: Place the trimmer on a flat, stable surface, ensuring the cutting head is clear of any obstructions.
- Chokerhåndtag: Move the choke lever to the "COLD START" or "FULL CHOKE" position.
- Primerpære: Press the primer bulb repeatedly (typically 5-7 times) until fuel is visible in the clear return line.
- Træk i startsnoren: Grip the starter handle firmly and pull the starter cord with a smooth, steady motion until the engine fires (usually 1-3 pulls). Do not pull the cord to its full extension.
- Choke to Half: Once the engine fires, immediately move the choke lever to the "HALF CHOKE" position.
- Genstart: Træk i startsnoren igen, indtil motoren starter og kører jævnt.
- Choke Off: Once the engine is running, move the choke lever to the "RUN" or "OFF CHOKE" position. Allow the engine to warm up for 30-60 seconds before operating.
Betjening af trimmeren
- Korrekt greb: Hold trimmeren fast med begge hænder, og hold en balanceret stilling.
- Skæreteknik:
- Use a sweeping motion, moving the cutting head from side to side.
- For best results, cut with the tip of the line.
- Avoid hitting hard objects like rocks, fences, or concrete, as this can damage the line and the trimmer.
- Linjefremføring: The Speed-Feed 500 head allows for quick line advancement by tapping the head on the ground while the engine is running at full throttle.
- Fuel Monitoring: Periodically check the fuel level. Refuel only when the engine is off and cool.
Standsning af motoren
- Slip gashåndtaget.
- Move the engine stop switch to the "OFF" position.
Opretholdelse
Regular maintenance ensures optimal performance and extends the life of your ECHO SRM-3020T string trimmer.
- Rengøring af luftfilter:
- De to-stage air filtration system increases cleaning capability and allows for longer maintenance intervals.
- Access the air filter by opening the tool-less access cover.
- Clean the filter element with warm, soapy water, rinse thoroughly, and allow to air dry completely. Replace if damaged or excessively dirty.
- Tændrørsinspektion:
- Remove the spark plug and inspect for carbon buildup or wear.
- Clean or replace as necessary. Ensure the gap is set correctly according to the engine manual.
- Brændstoffilter: Inspect and replace the fuel filter periodically, especially if you notice fuel delivery issues.
- Smøring af gearkasse: Refer to your engine manual for specific instructions on lubricating the gearbox. This typically involves adding grease to a designated port.
- Trimmer Head and Line:
- Regularly inspect the Speed-Feed 500 head for wear or damage.
- Replace trimmer line as needed. Use only recommended line diameters (e.g., .095 Black Diamond).
- Generel rengøring: Keep the engine cooling fins and air intake clear of debris to prevent overheating. Wipe down the exterior of the trimmer after each use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren vil ikke starte. | No fuel or incorrect fuel mixture. Choke not set correctly. Tilsmudset tændrør. Tilstoppet brændstoffilter. | Check fuel level and ensure correct gas/oil mix. Adjust choke lever as per starting instructions. Rengør eller udskift tændrøret. Udskift brændstoffilteret. |
| Engine starts but dies. | Choke not fully off. Luftfilter snavset. Gammelt eller gammelt brændstof. | Move choke to "RUN" position. Rens luftfilteret. Drain old fuel and refill with fresh mix. |
| Strømtab under drift. | Beskidt luftfilter. Forkert brændstofblanding. Overophedning. | Rens luftfilteret. Verify fuel mix ratio. Clean cooling fins, allow engine to cool. |
| Trimmer line not feeding. | Line tangled or fused inside head. Incorrect line diameter. Head mechanism worn. | Disassemble head, untangle/replace line. Use recommended .095 line. Inspicer og udskift trimmerhovedet om nødvendigt. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | EKKO |
| Modelnummer | SRM-3020T |
| Motorens slagvolumen | 30.5 cc professional-grade, 2-stroke engine |
| Strømudgang | 1.8 hk |
| Drivaksel | 4-Layer Cable |
| Skaftlængde | 59 tommer |
| Brændstofkapacitet | 24.0 fl. oz. |
| Skærehoved | Speed-Feed 500 |
| Skåret skår | 20 tommer |
| Skaft type | Lige |
| Nylon Line Diameter | .095 Black Diamond |
| Dry Weight (with cutting head, excludes harness) | 13.7 lb |
| Dry Weight (without cutting head, includes shield) | 12.1 lb |
| Gear reduktion | 1.62:1 |
| Luftfiltreringssystem | To-stage, tool-less access |
Garanti og support
The ECHO SRM-3020T string trimmer comes with a manufacturer's warranty. The warranty is provided directly through ECHO. For specific details regarding your warranty coverage and to register your item, please contact ECHO directly.
- Consumer Warranty: 5 år
- Kommerciel garanti: 2 år
For technical assistance, parts, or service, please refer to the official ECHO website or contact their customer support. You can often find contact information and service center locators on the manufacturer's official webwebsted.
Note: This manual provides general information. Always refer to the official ECHO product manual included with your purchase for complete and detailed instructions, safety warnings, and warranty information.
