1. Introduktion
The Hayward PoolVac XL Suction Pool Cleaner is designed for efficient and quiet cleaning of in-ground gunite pools up to 20 x 40 ft. Utilizing patented AquaPilot technology, it systematically covers the pool floor, walls, and coves, ensuring comprehensive cleaning. Its advanced suction design and unique wing design maintain constant suction power, effectively collecting debris and dirt.
Nøglefunktioner:
- Patented AquaPilot technology for systematic pool coverage.
- Wide vacuum inlet and unique wing design for constant suction power.
- Connects directly to the pool’s skimmer or suction port for quick installation.
- No debris bags to empty, reducing maintenance.
- Advanced suction design ensures efficient and quiet operation.
2. Opsætningsvejledning
Udpakning og første samling
Fjern forsigtigt alle komponenter fra emballagen. Sørg for, at alle dele, der er anført på pakkelisten, er til stede, før du fortsætter med monteringen.
Figure 2.1: Hayward PoolVac XL Suction Pool Cleaner, top view.
Figure 2.2: Hayward PoolVac XL Suction Pool Cleaner, back view showing hose connection point.
Connecting the Cleaner
The PoolVac XL is designed for complete installation in less than 10 minutes. Follow these steps:
- Unbox the pool cleaner and its components.
- Connect the provided 40-foot hose sections to form the full length.
- Attach one end of the hose to the cleaner's inlet.
- Connect the other end of the hose to your pool’s skimmer or a dedicated suction port. Ensure a secure connection to prevent air leaks.
- Place the cleaner into the pool, ensuring it is fully submerged and free of air bubbles.
Figure 2.3: Diagram illustrating quick installation by connecting the hose to the pool's filtration system.
Inkluderet tilbehør
The PoolVac XL comes with essential accessories for optimal performance:
- 40 ft. Hose (12 pieces for total length)
- Hose Cone Adapter
- Trykmåler
- Regulatorventil
Figure 2.4: Visual representation of the PoolVac XL and its included accessories: hose, hose cone adapter, pressure gauge, and regulator valve.
3. Betjeningsvejledning
Start af rengøringscyklussen
Once the cleaner is submerged and connected, turn on your pool's pump. The PoolVac XL is hydraulically powered by the pool's suction, so it will begin to move and clean as soon as the pump is active.
Video 3.1: Hayward PoolVAC XL in action, demonstrating its movement and cleaning capabilities in a pool. This video shows the cleaner moving across the pool floor and walls, highlighting its efficiency.
AquaPilot Technology
The patented AquaPilot technology enables the cleaner to systematically navigate your pool. It follows a programmed steering sequence that ensures thorough coverage of the entire pool surface, including the floor, walls, and coves, without getting stuck.
Figure 3.1: Illustration of the AquaPilot technology's systematic cleaning pattern for efficient pool coverage.
Suction Power and Debris Collection
The wide vacuum inlet and unique wing design work together to deliver constant suction power, effectively picking up various types of debris, from small particles to larger leaves. The cleaner is specifically designed with 'shoes' optimized for gunite pool surfaces.
Figure 3.2: Visual representation of the constant suction power generated by the PoolVac XL, effectively drawing in debris.
4. Vedligeholdelse og pleje
Rutinemæssig rengøring
To ensure the longevity and optimal performance of your PoolVac XL, regular maintenance is crucial. After each use, or as needed, rinse off any residual chlorinated water from the cleaner and its hose. Dry all components thoroughly before storing.
Inspektion af komponenter
Periodically inspect the hose for any damage or blockages. Check the cleaner's shoes and internal components for wear or debris accumulation. The design allows for easy access to internal parts for cleaning or replacement.
Figur 4.1: Øverst view of the PoolVac XL, showing the main body and hose connection point.
5. Fejlfinding af almindelige problemer
Cleaner Not Moving or Stuck
- Tjek sugning: Ensure your pool pump is running and providing adequate suction. Verify that the hose is securely connected to the skimmer or suction port without air leaks.
- Hose Tangles: Excessive hose length or improper setup can lead to tangling, restricting cleaner movement. Adjust hose length to match pool dimensions.
- Forhindringer: The cleaner may get stuck on large debris or uneven pool surfaces. Manually remove large items from the pool before operating.
Inefficient Cleaning
- Træsko: Inspect the cleaner's inlet and internal components for any debris that might be blocking the suction path.
- Slange længde: An incorrect hose length can hinder the cleaner's ability to reach all areas of the pool. Ensure the hose is long enough to reach the furthest point of the pool, plus two additional hose sections.
- Vandflow: Verify that the pool's filtration system is operating correctly and providing sufficient water flow for optimal cleaner performance.
6. Produktspecifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Hayward |
| Modelnavn | W32025ADC |
| Produktdimensioner | 40.4 cm L x 13.6 cm B x 11.9 cm H |
| Varens vægt | 18 pund |
| Strømkilde | Hydraulic Powered |
| Slange længde | 40 fod |
| Materiale | Plast |
| Farve | Hvid |
| Kontrolmetode | Røre |
| Montering påkrævet | Ja |
| Installationstype | Selvinstallation |
| UPC | 610377390224 |
7. Garanti og kundesupport
Garantioplysninger
The Hayward PoolVac XL Suction Pool Cleaner comes with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage.
Kontakt support
For technical assistance, troubleshooting, or warranty claims, please contact Hayward Customer Support. Contact details can be found on the official Hayward webwebstedet eller i din produktdokumentation.
