Mounting Dream MD2296-24K Full Motion TV Wall Mount Instruction Manual

1. Produktet er slutview

This manual provides detailed instructions for the safe and proper installation and operation of your Mounting Dream MD2296-24K Full Motion TV Wall Mount. This mount is designed to securely hold most 42-84 inch flat or curved screen televisions weighing up to 100 LBS (45.3 kg).

The full motion design allows for optimal viewing angles with tilt, swivel, and extension capabilities. Please read all instructions carefully before beginning installation.

Sikkerhedsoplysninger

• ADVARSEL: Do not install this product into drywall alone. It must be mounted into solid concrete walls or wood studs.
• Sørg for, at vægkonstruktionen sikkert kan bære den samlede vægt af beslaget og dit fjernsyn.
• Brug altid en stolpesøger til præcist at lokalisere træstolper.
• Det anbefales at være to personer til sikker installation, især når fjernsynet løftes.
• Overskrid ikke den maksimale vægtkapacitet på 45.3 kg.

2. Pakkens indhold

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Mounting Dream customer service.

Billede: Overview of the Mounting Dream MD2296-24K TV Wall Mount and included hardware. This image displays the main wall plate, articulating arms, TV brackets, and various screws, washers, spacers, a small level, and cable ties.

Included Hardware (Exampdet)

• Vægplademontering
• TV-beslagarme (2)
• Lag Bolts (for wood studs/concrete)
• Concrete Anchors (may require separate request from Mounting Dream)
• Assorted TV Screws (M4, M6, M8)
• Skiver og afstandsstykker
• Boble niveau
• Kabelbindere
• Monteringsskabelon

3. Kompatibilitetskontrol

Before installation, confirm that this mount is compatible with your television and wall type.

Billede: Visual guide for checking TV mount compatibility, illustrating VESA pattern, TV weight and size, potential port blockage, and suitable wall types.

TV specifikationer

• TV størrelse: Most 42-84 inch OLED/LED/Plasma/Curved TVs.
• Vægt kapacitet: Maximum 100 LBS (45.3 kg).
• VESA-kompatibilitet: Max VESA 600x400mm (24"x16"). Common VESA patterns supported include 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x300mm, 600x200mm, 600x400mm.
• Blocked Inputs: Check the location of your TV's input ports to ensure the mount will not block them.

Kompatibilitet mellem vægtyper

Billede: Illustration of compatible wall types: solid concrete wall, wood stud wall (16", 18", 24" spacing), and brick wall. A warning indicates not to mount on drywall alone.

• Træstolpevægge: Kompatibel med træstolpeafstande på 16", 18" og 24".
• Massive betonvægge: Requires appropriate concrete anchors (contact Mounting Dream for these if not included).
• Murstensvægge: Requires appropriate anchors (contact Mounting Dream for these if not included).
• VIGTIG: This TV mounting bracket is IKKE for drywall alone.

4. Opsætning og installation

Follow these steps carefully for a secure installation. It is highly recommended to have a second person assist with the installation, especially when lifting the TV.

Nødvendige værktøjer (ikke inkluderet)

• boremaskine
• Phillips hovedskruetrækker
• Ratchet Set (for lag bolts)
• Stud Finder
• Blyant
• Målebånd
• Sikkerhedsbriller

Installationstrin

Billede: Simplified 3-step installation process: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.

1. Determine TV Placement: Decide the desired height and horizontal position for your TV. Use painter's tape to outline the TV's position on the wall for visual reference.
2. Find vægstolper: Use a stud finder to accurately locate the center of the wood studs in your desired mounting area. Mark the stud locations with a pencil. For concrete or brick walls, ensure you have the correct anchors and drill bits.
3. Fastgør TV-beslag til TV'et: Carefully place your TV face down on a soft, clean surface. Attach the vertical TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure the brackets are centered and securely fastened.
4. Position and Mark Wall Plate: Hold the wall plate assembly against the wall at your desired height, aligning it with the marked stud centers. Use the provided mounting template if available. Use the included bubble level to ensure the wall plate is perfectly horizontal. Mark the drilling points for the lag bolts.
5. Bor pilothuller: Using a power drill, drill pilot holes at the marked locations. For wood studs, follow the recommended drill bit size in the instructions. For concrete/brick, use a masonry drill bit and ensure the holes are deep enough for the anchors.
6. Installer vægplade: Secure the wall plate assembly to the wall using the lag bolts and washers. Tighten them firmly with a ratchet set, but do not overtighten.
7. Test Wall Mount: Before hanging the TV, extend the articulating arms and apply gentle downward pressure to ensure the mount is securely fastened to the wall.
8. Hæng fjernsynet op: With the help of a second person, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is properly seated and secure.
9. Sikker montering af TV: Locate the safety screws or clips on the TV brackets and tighten them to prevent the TV from accidentally lifting off the wall plate.

5. Betjening og justeringer

Your Mounting Dream MD2296-24K mount offers various adjustments to achieve the optimal viewoplevelse.

Flexible Extension and Retraction

Billede: Diagram showing the TV mount extending up to 16.7 inches from the wall and retracting to 2.6 inches, illustrating its flexible positioning.

Gently pull the TV away from the wall to extend the articulating arms. Push the TV back towards the wall to retract it. The mount extends up to 16.7 inches and retracts to 2.6 inches from the wall.

Tilt justering

Billede: Visual representation of the TV mount's tilt range, from +5 degrees upward to -15 degrees downward, designed to reduce screen glare.

The mount allows for a tilt range of +5° (upward) to -15° (downward). Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to the desired angle, and then securely tighten the knobs/bolts.

Justering af drejning

Billede: Depiction of the TV mount's swivel capability, allowing the TV to rotate up to +/-45 degrees horizontally for viewfra forskellige positioner.

The articulating arms allow the TV to swivel up to 45° left or right. Gently push or pull the TV to the desired horizontal viewvinkel.

Niveaujustering

Billede: Illustration of the TV mount's post-installation level adjustment feature, allowing for a fine-tuning of +/-4 degrees to correct any slight tilt after mounting.

If the TV is not perfectly level after installation, you can adjust it by ±4°. Loosen the leveling screws on the TV brackets, adjust the TV to be level, and then retighten the screws.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.

• Periodisk eftersyn: Kontrollér alle skruer og bolte med et par måneders mellemrum for at sikre, at de er forsvarligt fastspændt.
• Rensning: Tør holderen af ​​med en blød, tør klud. Undgå at bruge slibende rengøringsmidler eller opløsningsmidler.
• Smøring: If the articulating arms become stiff, a small amount of silicone-based lubricant can be applied to the moving joints.

7. Fejlfinding

Hvis du støder på problemer under eller efter installationen, kan du bruge følgende almindelige løsninger.

• TV'et er ikke i vater: Use the ±4° level adjustment feature as described in Section 5. Ensure the wall plate was installed level initially.
• Beslaget føles løst på væggen: Re-check all lag bolts securing the wall plate to the wall. Ensure they are tightened into solid wood studs or concrete with appropriate anchors.
• TV'et er svært at flytte/justere: Check for any overtightened bolts on the articulating arms or tilt mechanism. Apply a small amount of silicone lubricant if necessary.
• Manglende hardware: Refer to Section 2 for package contents. Contact Mounting Dream customer service for replacement parts.

For further assistance, please contact Mounting Dream customer service.

8. Specifikationer

9. Garanti og kundesupport

Mounting Dream is committed to providing high-quality products and excellent customer service.

Garantioplysninger

This Mounting Dream TV wall mount is backed by a 10 års garanti, hvilket sikrer ro i sindet med hensyn til dens kvalitet og holdbarhed.

Kundesupport

Our US-based customer service experts are available every day of the week to assist you with any questions or concerns regarding installation, operation, or product issues. Please refer to the product packaging or the official Mounting Dream webwebsted for kontaktoplysninger.