Indledning
Thank you for choosing the Nanlite LumiPad 25 LED Panel. This manual provides essential information for the safe and effective operation of your device. Please read it thoroughly before use and retain it for future reference.
Sikkerhedsforanstaltninger
- Udsæt ikke enheden for vand eller høj luftfugtighed.
- Undgå direkte øjenkontakt med LED-lyset.
- Brug kun godkendte strømadaptere og batterier.
- Forsøg ikke at adskille eller modificere enheden.
- Opbevares utilgængeligt for børn.
Pakkens indhold
Kontroller venligst, at alle varer er til stede i din pakke:
- Nanlite LumiPad 25 LED Panel
- Monteringsadapter
- AC Power Adapter (may be sold separately)
- Brugermanual
Opsætning
1. Mounting the Light Panel
- Attach the included mounting adapter to the 1/4-inch screw thread located at the bottom of the LumiPad 25.
- Secure the mounting adapter to a compatible light stand or tripod.
- Adjust the angle of the LED panel using the tilt mechanism on the mounting adapter.
2. Strømforsyning til enheden
The LumiPad 25 offers multiple power options:
- AC strøm: Connect the AC power adapter to the DC IN port on the back of the panel, then plug the adapter into a wall outlet.
- Batteristrøm: Insert two compatible NP-F style batteries (sold separately) into the battery slots on the back of the panel. Ensure correct polarity.
Operation
1. Tænd/sluk
Locate the power switch on the back of the panel. Flip the switch to the 'ON' position to power on the light. Flip it to 'OFF' to power off.
2. Justering af lysstyrke
Use the 'DIMMER' control knob on the back of the panel to adjust the light output from 0% to 100% brightness. Rotate clockwise to increase brightness and counter-clockwise to decrease.
3. Justering af farvetemperatur
Use the '5600K' control knob on the back of the panel to adjust the color temperature from warm (3200K) to cool (5600K). Rotate clockwise for cooler temperatures and counter-clockwise for warmer temperatures.
Opretholdelse
Rensning
To clean the LED panel, use a soft, dry cloth. For stubborn marks, a slightly damp en klud med et mildt rengøringsmiddel kan bruges, og sørg for, at der ikke kommer væske ind i enheden. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Opbevaring
When not in use, store the LumiPad 25 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove batteries.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power, faulty connection, or depleted batteries. | Check power adapter connection or replace/recharge batteries. Ensure power switch is ON. |
| Brightness not adjusting. | Dimmer knob not functioning or at minimum/maximum setting. | Rotate the dimmer knob fully in both directions. If issue persists, contact support. |
| Color temperature not changing. | Color temperature knob not functioning or at minimum/maximum setting. | Rotate the color temperature knob fully in both directions. If issue persists, contact support. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 11-2002 |
| Produktdimensioner | 13.58 x 37 x 9 inches (overall packaging) / 1.2"L x 1.2"W x 1.2"H (unit) |
| Varens vægt | 7.1 ounce |
| Lysstyrke | 2140 lumen (maks.) |
| Farvetemperatur | 3200K - 5600K |
| Strømindstillinger | AC Adapter, NP-F style batteries, DC via D-tap cable |
Garanti og support
Nanlite products are covered by a limited warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Nanlite webwebstedet eller kontakt din lokale forhandler.
Official Nanlite Webwebsted: www.nanlite.com
