ECHOGEAR Full Motion TV-vægbeslag Brugsanvisning

Indledning

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ECHOGEAR Full Motion Articulating TV Wall Mount. Please read this manual thoroughly before beginning installation.

En detaljeret view of the ECHOGEAR Full Motion Articulating TV Wall Mount, showcasing its robust black steel construction and articulating arms.

Sikkerhedsoplysninger

VIGTIGE SIKKERHEDSINSTRUKTIONER: Read all instructions before installation. Failure to follow these instructions can result in property damage, serious injury, or death.

• Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og fjernsynet.
• Do not exceed the maximum weight capacity of 130 lbs (59 kg) or the maximum screen size of 82 inches.
• Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/masonry.
• Brug passende sikkerhedsudstyr, herunder øjenbeskyttelse, under installationen.
• To personer anbefales for sikker installation.

Pakkens indhold

Verify all parts are present and undamaged before beginning installation. If any parts are missing or defective, contact ECHOGEAR customer support.

• Vægplademontering
• Tv-beslag (2)
• Mounting Hardware Kit (various screws, washers, spacers)
• Boreskabelon
• Kabelhåndteringsklip
• Instruktionsmanual

Opsætning og installation

This section guides you through the process of mounting your ECHOGEAR TV wall mount.

Trin 1: Fastgør beslag til TV

Carefully place your TV face down on a soft, clean surface. Attach the two TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are securely fastened.

A close-up image showing a hand using a screwdriver to attach one of the mounting brackets to the back of a television, illustrating the initial step of assembly.

Step 2: Secure Wall Plate

Determine the desired mounting location on your wall. Use the provided drilling template to mark the pilot hole locations. For wood stud installation, ensure the wall plate is centered on the studs. For concrete/masonry, use appropriate anchors. Drill pilot holes and securely fasten the wall plate to the wall using the lag bolts.

An image depicting the use of the ECHOGEAR drilling template, taped to a wall, with a power drill creating pilot holes for the wall mount. This template simplifies accurate placement.

A view of the wall plate assembly being secured to the wall, showing the robust construction and the bolts used for attachment. This step ensures the mount is firmly anchored.

Step 3: Hang TV on Wall Mount

With assistance, carefully lift the television and hook the TV brackets onto the wall plate assembly. Ensure the TV is securely seated. The mount allows for post-installation leveling and centering.

Two individuals are shown carefully lifting a television to attach it to the wall mount, highlighting the ease of the final hanging step.

A diagram illustrating the mount's ability to slide 5.4 inches left or right after installation, allowing for perfect TV centering even if wall studs are not ideally spaced.

Betjeningsvejledning

Your ECHOGEAR Full Motion TV Wall Mount offers versatile adjustments for optimal viewing.

Extension and Retraction

Gently pull the television away from the wall to extend the articulating arms up to 19 inches. Push the television back towards the wall to retract the mount to a slim 2.9-inch profile.

This image demonstrates the mount's full extension of 19 inches from the wall, providing ample space for cable access, and its ability to retract to a slim 2.9 inches for a low-profile se.

Justering af drejning

The mount allows for a 140-degree swivel, enabling you to angle your TV for viewing from various positions in the room.

A visual representation of the mount's 140-degree swivel range and 15-degree tilt capability, highlighting the tool-free tilt knob for easy angle adjustments.

Tilt justering

Adjust the tilt of your television up to 15 degrees to reduce glare and achieve the perfect viewing angle. Use the tool-free tilt knob for easy adjustments.

Kabelstyring

Utilize the integrated cable management clips to route and organize your cables along the articulating arms, ensuring a tidy appearance.

A close-up image showing cables neatly routed along the articulating arm of the mount using the included cable clips, demonstrating effective cable management.

Opretholdelse

• Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Lubricate moving parts if necessary, using a silicone-based lubricant.

Fejlfinding

TV'et er ikke i vater efter installation.

The ECHOGEAR mount allows for post-installation leveling. Gently adjust the TV by hand to achieve the desired level. The mount's design accommodates minor adjustments.

Mount feels stiff or difficult to move.

Check for any cables or obstructions hindering movement. If the issue persists, apply a small amount of silicone-based lubricant to the articulating joints.

Manglende dele.

If any parts were missing from your package, please contact ECHOGEAR customer support immediately for assistance.

Specifikationer

Garanti og support

ECHOGEAR stands behind its products. For warranty information, technical assistance, or any questions regarding your TV mount, please contact our Minnesota-based product experts.

Kontaktoplysninger:

• Phone: (Refer to product packaging or ECHOGEAR website for current number)
• Email: (Refer to product packaging or ECHOGEAR website for current email)
• Webwebsted: www.echogear.com

ECHOGEAR is committed to environmental responsibility. For every EGLF3 TV mount sold, a tree is planted.

An image highlighting ECHOGEAR's commitment to sustainability, stating that over 1,000,000 trees have been planted through their partnership with The Carbon Offset Company.