SONOFF TX T2 1-Gang Smart Light Switch Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your SONOFF TX T2 1-Gang Smart Light Switch. Please read this manual carefully before installation and use to ensure proper function and safety.

The SONOFF TX T2 1-Gang Smart Light Switch is a Wi-Fi enabled touch wall switch designed to control your lighting. It requires a neutral wire for installation and operates on a 2.4 GHz Wi-Fi network. The switch is compatible with the eWeLink app, Amazon Alexa, and Google Home for remote and voice control.

2. Produktet er slutview

The SONOFF TX T2 1-Gang Smart Light Switch offers a modern design with a toughened glass panel and touch control. It integrates seamlessly into smart home ecosystems, providing convenient control over your lighting.

Image: SONOFF TX T2 1-Gang Smart Light Switch and its retail packaging.

Nøglefunktioner:

• Touch Control: Responsive touch panel for manual operation.
• Fjernbetjening: Control lights via the eWeLink app from anywhere.
• Stemmestyring: Kompatibel med Amazon Alexa og Google Home for håndfri betjening.
• Planlægning og timere: Set schedules and timers for automated light control.
• Smarte scener: Create custom scenes to automate multiple devices.
• RF433 Support: Supports control via an RF433 remote (sold separately).
• Neutral ledning påkrævet: Ensures stable operation.
• 2.4 GHz Wi-Fi: Connects to standard home Wi-Fi networks.

Hvad er der i æsken:

• SONOFF TX T2 1-Gang Smart Wall Light Switch

3. Sikkerhedsoplysninger

WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician or service personnel. Ensure power is OFF at the circuit breaker before installation.

• Sluk altid for strømmen ved afbryderen, før du installerer eller servicerer afbryderen.
• A neutral wire is required for this device. Verify its presence in your wall box before proceeding.
• Må ikke installeres med våde hænder.
• Do not use in excessively humid environments.
• Ensure the switch is rated for the load it will control. (Current Rating: 2 Amps, Operating Voltagf.eks. 120 volt).
• This is not a dimmer switch. Do not attempt to use it with dimmable lights requiring a dimmer switch.

4. Installation

Follow these steps carefully to install your SONOFF TX T2 Smart Light Switch.

1. Sluk for strømmen: Locate your circuit breaker and turn off the power to the light switch you are replacing. Verify the power is off using a voltage tester.
2. Fjern den gamle switch: Fjern forsigtigt den eksisterende vægplade og lyskontakt. Frakobl ledningerne.
3. Identificér ledninger: You will typically find a Live wire (L), a Neutral wire (N), and a Load wire (L1 Out). For multi-gang switches, there will be additional Load wires (L2 Out, L3 Out). This switch requires a neutral wire.
4. Ledningsdiagram: Refer to the wiring diagram below for correct connections. Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and the Load wire(s) to the 'L1 Out' terminal (and 'L2 Out', 'L3 Out' for multi-gang versions). Ensure all connections are secure.

Image: Wiring diagram for a 3-gang SONOFF TX T2 switch. For a 1-gang switch, only L, N, and L1 Out terminals are used.

5. Monter kontakten: Gently push the wired switch into the wall box. Secure it with screws.
6. Fastgør frontplade: Klik glasfrontpladen på kontaktmodulet.
7. Gendan strøm: Turn the power back on at the circuit breaker. The switch's LED indicator should light up.

Image: Dimensions of the SONOFF TX T2 switch, indicating compatibility with standard wall boxes (120mm x 74mm with 85+/-2mm screw spacing).

5. Opsætning

After physical installation, set up your smart switch with the eWeLink app.

5.1 Download and Install eWeLink App

• Download eWeLink-appen fra App Store (iOS) eller Google Play Store (Android).
• Registrer en konto og log ind.

5.2 Par enheden

The SONOFF TX T2 switch does not require a separate hub for Wi-Fi connectivity.

Image: Illustration of direct Wi-Fi connection via the eWeLink app, without a separate hub.

1. Gå ind i parringstilstand: Press and hold the touch button on the switch for approximately 5-7 seconds until the Wi-Fi LED indicator flashes rapidly.
2. Tilføj enhed i appen: Open the eWeLink app, tap the '+' icon or 'Add Device'.
3. Select Pairing Method: Choose the appropriate pairing method (e.g., Quick Pairing Mode).
4. Opret forbindelse til 2.4GHz Wi-Fi: Enter your 2.4GHz Wi-Fi network name and password. (Note: 5GHz networks are not supported).
5. Fuld parring: Follow the on-screen instructions in the app to complete the pairing process. The device will be discovered and added to your account.

Image: Visual guide for installing and logging into the eWeLink app, tapping 'Add Device', entering 2.4GHz Wi-Fi credentials, and discovering/adding devices.

6. Betjeningsvejledning

6.1 Manuel kontrol

Simply touch the capacitive button on the switch panel to turn the connected light(s) ON or OFF.

6.2 App kontrol

Use the eWeLink app on your smartphone or tablet to control your lights from anywhere with an internet connection.

Image: A person using the eWeLink app on a smartphone to control a light fixture in a home, demonstrating remote control capabilities.

Image: A woman using her smartphone to control lights in various rooms of her home, illustrating the convenience of app-based control.

6.3 Stemmekontrol

Integrate your SONOFF switch with Amazon Alexa or Google Home for voice commands.

• Til Alexa: Open the Alexa app, enable the 'eWeLink Smart Home' skill, and link your eWeLink account. Discover devices. Then, use commands like "Alexa, turn on the light."
• Til Google Home: Open the Google Home app, tap 'Set up device', then 'Works with Google'. Søg efter 'eWeLink Smart Home', link your account, and assign devices to rooms. Use commands like "Hey Google, turn off the kitchen light."

Image: A woman interacting with an Amazon Echo device, giving the command "Alexa, turn on the light" to control a smart switch.

Image: A woman in a kitchen setting, using an Amazon Echo device to control a smart light switch with a voice command.

6.4 Planlægning og timere

Set up schedules and timers within the eWeLink app to automate your lighting.

Image: An illustration depicting a timer set to turn off lights at 11:00 PM, with a person sleeping, highlighting automation for convenience.

Image: A person sleeping, with an overlay showing a smart light switch scheduled to turn on at 7:00 AM and off at 10:30 PM, demonstrating automated routines.

6.5 Smart Scenes and IFTTT

Create custom smart scenes in the eWeLink app to control multiple devices with a single tap or based on specific conditions. The switch also supports IFTTT (If This Then That) for advanced automation.

Image: A woman reading in bed, with a graphical interface showing 'ON' and 'OFF' controls for a lamp, illustrating smart scene functionality.

Image: A diagram showing IFTTT integration, where changes in light conditions (sunrise/sunset) trigger actions for smart home devices.

6.6 RF433 fjernbetjening

The switch supports control via an RF433 remote, offering an additional physical control option without needing Wi-Fi.

Image: A hand holding an RF433 remote control, pointing towards a SONOFF smart wall switch, demonstrating an alternative control method.

6.7 LAN-kontrol

For TX series switches, LAN control allows operation of appliances even without an active Wi-Fi connection, ensuring functionality during internet outages.

Image: A floor plan illustrating smart switches being controlled locally via LAN, indicating continued functionality even if the Wi-Fi connection is unstable or disconnected.

6.8 Deling af enhed

Share control of your smart switch with family members through the eWeLink app.

Image: Two individuals looking at their smartphones, with an overlay showing a 'Share' menu in the eWeLink app, indicating device sharing functionality.

Image: Two individuals smiling and looking at their smartphones, with a graphic illustrating device sharing among multiple users, emphasizing collaborative control.

7. Vedligeholdelse

The SONOFF TX T2 Smart Light Switch is designed for low maintenance.

• Rensning: The toughened glass panel is easy to clean. Use a soft, damp klud til at tørre overfladen af. Undgå slibende rengøringsmidler eller stærke kemikalier.
• Firmwareopdateringer: Tjek regelmæssigt eWeLink-appen for tilgængelige firmwareopdateringer for at sikre optimal ydeevne og sikkerhed.

Image: A hand wiping the surface of a smart light switch with a cloth, highlighting its easy-to-clean toughened glass panel.

8. Fejlfinding

Hvis du støder på problemer med din SONOFF TX T2 Smart Light Switch, kan du se følgende almindelige problemer og løsninger:

• Kontakten reagerer ikke:
  • Kontroller om afbryderen er tændt.
  • Ensure the wiring is correct and secure (Live, Neutral, Load).
  • If using app control, check your Wi-Fi connection and router.
• Kan ikke parres med eWeLink-appen:
  • Sørg for, at dit Wi-Fi-netværk er 2.4 GHz. 5 GHz-netværk understøttes ikke.
  • Make sure the switch is in pairing mode (Wi-Fi LED flashing rapidly).
  • Kontrollér, at din Wi-Fi-adgangskode er nøjagtig.
  • Move the switch closer to your Wi-Fi router during pairing.
• Stemmestyring virker ikke:
  • Verify that your eWeLink account is correctly linked to Alexa or Google Home.
  • Ensure the device is discovered and named appropriately in the voice assistant app.
  • Tjek din internetforbindelse.
• Lysene flimrer eller slukker ikke helt:
  • This switch is not a dimmer. Ensure your lights are compatible with a standard ON/OFF switch.
  • Verify that a neutral wire is correctly connected.

9. Specifikationer

10. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle SONOFF-side. webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

Online ressourcer:

• Besøg SONOFF-butik på Amazon for produktinformation og opdateringer.