Indledning
Thank you for choosing the Mipro MR-823 Dual Hand Wireless Microphone system. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new wireless microphone system. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Sikkerhedsoplysninger
- Udsæt ikke enheden for regn eller fugt for at forhindre brand eller elektrisk stød.
- Placer ikke genstande fyldt med væske, såsom vaser, på enheden.
- Sørg for ordentlig ventilation; bloker ikke ventilationsåbninger.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde.
Pakkens indhold
Kontroller venligst indholdet af din pakke for at sikre, at alle varer er til stede:
- 1 x Mipro MR-823 Wireless Receiver Unit
- 2 x håndholdte trådløse mikrofoner
- Strømadapter
- Audio kabel
Produkt overview
The Mipro MR-823 system consists of a receiver unit and two handheld wireless microphones, designed for clear and reliable audio transmission.
This image displays the complete Mipro MR-823 Dual Hand Wireless Microphone system. It features a sleek, rectangular receiver unit with a control panel and two antennas, accompanied by two black handheld wireless microphones. The microphones have silver grilles and blue accents near the base of the grille.
Modtagerenhedsfunktioner:
- Front panel display for channel and status indication.
- Volume controls for each microphone channel.
- Antenna inputs for optimal signal reception.
- Audio output jacks (XLR and 1/4" unbalanced) on the rear panel.
Handheld Microphone Features:
- Integrated transmitter.
- Afbryderen.
- Batterirum.
Opsætning
- Udpak komponenter: Fjern forsigtigt alle varer fra emballagen.
- Position Receiver: Place the receiver unit on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
- Tilslut antenner: Screw the two antennas securely into their respective connectors on the rear of the receiver. Position them vertically for best reception.
- Tilslut lydudgang: Connect the receiver's audio output (XLR or 1/4" unbalanced) to your mixer, amplifier, or sound system using the provided audio cable.
- Tilslut strøm: Plug the power adapter into the DC input on the receiver and then into a suitable power outlet. Do not power on the unit yet.
- Installer mikrofonbatterier: Open the battery compartment of each handheld microphone and insert fresh batteries, observing the correct polarity.
- Tænd: Turn on your audio system first, then power on the Mipro MR-823 receiver. Finally, turn on each handheld microphone.
Betjeningsvejledning
Kanalsynkronisering:
The MR-823 system typically features automatic frequency synchronization. Once the receiver and microphones are powered on, they should automatically link to an available clear channel. Refer to the receiver's display for channel information.
Justering af lydstyrke:
Use the individual volume control knobs on the front panel of the receiver to adjust the output level of each microphone. Start with a low volume and gradually increase it to avoid feedback or distortion.
Mikrofonbrug:
- Hold mikrofonen cirka 2-6 cm fra munden for optimal lydoptagelse.
- Avoid covering the microphone grille with your hand, as this can affect sound quality and signal strength.
- Ensure a clear line of sight between the microphones and the receiver for best wireless performance.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the exterior of the receiver and microphones. Do not use liquid cleaners or abrasive chemicals.
- Udskiftning af batteri: Replace microphone batteries when the low battery indicator appears or when audio quality degrades. Always use fresh, high-quality batteries.
- Opbevaring: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
- Antennepleje: Håndter antenner forsigtigt for at undgå at de bøjer eller knækker.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra mikrofonen | Microphone not powered on; Low or dead batteries; Receiver not powered on; Volume too low; Microphone out of range; Frequency mismatch. | Ensure microphone and receiver are on; Replace batteries; Check receiver power; Increase volume; Move closer to receiver; Re-sync frequencies if necessary. |
| Dårlig lydkvalitet / Statisk | Interference; Low batteries; Microphone too far from receiver; Obstructions; Incorrect gain settings. | Change operating frequency (if available); Replace batteries; Reduce distance; Remove obstructions; Adjust receiver volume. |
| Feedback (hylende lyd) | Microphone too close to speakers; Volume too high; Room acoustics. | Move microphone away from speakers; Lower volume; Adjust speaker placement or use acoustic treatment. |
| Kort trådløs rækkevidde | Obstructions; Interference; Antenna position. | Ensure clear line of sight; Re-position antennas; Avoid placing receiver near metal objects or other wireless devices. |
Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | MIPRO |
| Model | MR-823 |
| Impedans | 250 Ohm |
| Strømkilde | Batteridrevet |
| Signal-støjforhold | 78 dB |
| Frekvensområde | 100 Hz - 10 kHz |
| Frekvensrespons | 16 KHz |
| Pakkedimensioner | 34.01 x 24.99 x 21.01 cm |
| Varens vægt | 122 g |
| Batterier påkrævet | No (for receiver, but yes for microphones) |
| Speciel funktion | Trådløs |
| Farve | Sort |
| Polar mønster | Omnidirektionel |
Garanti og support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
If you encounter issues not covered in this manual, please contact MIPRO customer service or your authorized dealer for assistance.
